Información de empaque
| Encapsulado | Pines VSON (DRC) | 10 |
| Rango de temperatura de funcionamiento (℃) -40 to 125 |
| Cant. de paquetes | Empresa de transporte 250 | SMALL T&R |
Características para TPS2559-Q1
- Qualified for Automotive Applications AEC-Q100
Qualified With the Following Results:- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C5
- 2.5 to 6.5 V Operating Range
- Adjustable 1.2 to 4.7 A I(LIMIT) (±4.7% at 4.7 A)
- 3.5 µs Short Circuit Shutoff (Typical)
- 13-mΩ High-Side MOSFET
- 2-µA Maximum Standby Supply Current
- Built-in Soft-Start
- Reverse Current Blocking when Disabled
- 8 kV / 15 kV System-Level ESD Capable
- 10-Pin SON (3-mm × 3-mm) Package with
Wettable Flanks
Descripción de TPS2559-Q1
The TPS2559-Q1 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559-Q1 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559-Q1.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. The FAULT logic output asserts low during overcurrent or overtemperature conditions.