TPS54810

Name: TPS54810
Brand: TI
SKU: TPS54810
Price: 2.7 USD

ACTIVO

Convertidor reductor síncrono con entrada de 4.5 V a 5.5 V y 8 A

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 4-V to 6-V Input, 8-A Output Synchronous Buck PWM Switcher with Integrated FETs datasheet (Rev. B) (Inglés)

TPS54810

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

8

Vin (min) (V)

4

Vin (max) (V)

6

Switching frequency (min) (kHz)

280

Switching frequency (max) (kHz)

700

Features

Enable, Frequency synchronization, Power good, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

0.9

Vout (max) (V)

3.3

Iq (typ) (µA)

11000

Duty cycle (max) (%)

90

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

8

Vin (min) (V)

4

Vin (max) (V)

6

Switching frequency (min) (kHz)

280

Switching frequency (max) (kHz)

700

Features

Enable, Frequency synchronization, Power good, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

0.9

Vout (max) (V)

3.3

Iq (typ) (µA)

11000

Duty cycle (max) (%)

90

HTSSOP (PWP)

28

62.08 mm² 9.7 x 6.4

30-m MOSFET Switches for High Efficiency at 8-A Continuous Output
0.9-V to 3.3-V Adjustable Output Voltage Range With 1% Accuracy
Externally Compensated
Fast Transient Response
Wide PWM Frequency:
Fixed 350 kHz, 550 kHz or
Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Total Cost
APPLICATIONS
- Low-Voltage, High-Density Systems With Power Distributed at 5 V
- Point of Load Regulation for High Performance DSPs, FPGAs, ASICs and Microprocessors
- Broadband, Networking, and Optical Communications Infrastructure
- Portable Computing/Notebook PCs

PowerPAD and SWIFT are trademarks of Texas Instruments.

30-m MOSFET Switches for High Efficiency at 8-A Continuous Output
0.9-V to 3.3-V Adjustable Output Voltage Range With 1% Accuracy
Externally Compensated
Fast Transient Response
Wide PWM Frequency:
Fixed 350 kHz, 550 kHz or
Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Total Cost
APPLICATIONS
- Low-Voltage, High-Density Systems With Power Distributed at 5 V
- Point of Load Regulation for High Performance DSPs, FPGAs, ASICs and Microprocessors
- Broadband, Networking, and Optical Communications Infrastructure
- Portable Computing/Notebook PCs

PowerPAD and SWIFT are trademarks of Texas Instruments.

As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

filter

Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)

Descargar