TPS62650

Name: TPS62650
Brand: TI
SKU: TPS62650
Price: 0.572 USD

ACTIVO

Convertidor reductor síncrono de 800 mA y 6 MHz en encapsulado de escala de chip

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 800-mA, 6-MHz HIGH-EFFICIENCY STEP-DOWN CONVERTER datasheet (Rev. B) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS62860

ACTIVO

Convertidor reductor de 1,75 V a 5,5 V, 0,6 A e IQ ultrabajo con interfaz I2C/VSEL Buck converter with I2C interface in a smaller WCSP package

TPS62650

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.8

Vin (min) (V)

2.3

Vin (max) (V)

5.5

Switching frequency (min) (kHz)

5400

Switching frequency (max) (kHz)

6600

Features

Enable, Light load efficiency, Output discharge, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

0.75

Vout (max) (V)

1.4375

Iq (typ) (µA)

38

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.8

Vin (min) (V)

2.3

Vin (max) (V)

5.5

Switching frequency (min) (kHz)

5400

Switching frequency (max) (kHz)

6600

Features

Enable, Light load efficiency, Output discharge, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

0.75

Vout (max) (V)

1.4375

Iq (typ) (µA)

38

Duty cycle (max) (%)

100

DSBGA (YFF)

9

1.96000000000000028000000000000001 mm² 1.4000000000000001 x 1.4000000000000001

86% Efficiency at 6 MHz Operation
38µA Quiescent Current
Wide V_IN Range From 2.3 V to 5.5 V
6MHz Regulated Frequency Operation
Best-In-Class Load and Line Transient
±2% PWM DC Voltage Accuracy
Automatic PFM/PWM Mode Switching
Low Ripple Light-Load PFM
I²C Compatible Interface up to 3.4 Mbps
Pin-Selectable Output Voltage (VSEL)
Internal Soft-Start, <150-µs Start-Up Time
Current Overload and Thermal Shutdown Protection
Three Surface-Mount External Components Required
(One MLCC Inductor, Two Ceramic Capacitors)
Complete Sub 1-mm Component Profile Solution
Total Solution Size <13mm²
Available in a 9-Pin NanoFree (CSP) Packaging
APPLICATIONS
- SmartReflex Compliant Power Supply
- OMAP Application Processor Core Supply
- Cell Phones, Smart-Phones
- Micro DC-DC Converter Modules

NanoFree Is a trademark of Texas Instruments
SmartReflex Is a trademark of Texas Instruments
OMAP Is a trademark of Texas Instruments

86% Efficiency at 6 MHz Operation
38µA Quiescent Current
Wide V_IN Range From 2.3 V to 5.5 V
6MHz Regulated Frequency Operation
Best-In-Class Load and Line Transient
±2% PWM DC Voltage Accuracy
Automatic PFM/PWM Mode Switching
Low Ripple Light-Load PFM
I²C Compatible Interface up to 3.4 Mbps
Pin-Selectable Output Voltage (VSEL)
Internal Soft-Start, <150-µs Start-Up Time
Current Overload and Thermal Shutdown Protection
Three Surface-Mount External Components Required
(One MLCC Inductor, Two Ceramic Capacitors)
Complete Sub 1-mm Component Profile Solution
Total Solution Size <13mm²
Available in a 9-Pin NanoFree (CSP) Packaging
APPLICATIONS
- SmartReflex Compliant Power Supply
- OMAP Application Processor Core Supply
- Cell Phones, Smart-Phones
- Micro DC-DC Converter Modules

NanoFree Is a trademark of Texas Instruments
SmartReflex Is a trademark of Texas Instruments
OMAP Is a trademark of Texas Instruments

The TPS6265x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6265x supports up to 800mA load current and allows the use of small, low cost inductors and capacitors.

The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I²C interface down to 0.75V, the device supports low-voltage DSPs and processors core power supplies in smart-phones and handheld computers.

The TPS6265x operates at a regulated 6MHz switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 3.5µA.

The serial interface is compatible with Standard, Fast/Fast Plus and High-Speed mode I²C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5mV, for setting the output voltage or reprogramming the mode of operation (PFM/PWM or Forced PWM) for instance.

The TPS6265x is available in an 9-pin chip-scale package (CSP).

The TPS6265x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6265x supports up to 800mA load current and allows the use of small, low cost inductors and capacitors.

The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I²C interface down to 0.75V, the device supports low-voltage DSPs and processors core power supplies in smart-phones and handheld computers.

The TPS6265x operates at a regulated 6MHz switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 3.5µA.

The serial interface is compatible with Standard, Fast/Fast Plus and High-Speed mode I²C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5mV, for setting the output voltage or reprogramming the mode of operation (PFM/PWM or Forced PWM) for instance.

The TPS6265x is available in an 9-pin chip-scale package (CSP).

filter

Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 10

	Tipo	Título	Fecha
*	Data sheet	800-mA, 6-MHz HIGH-EFFICIENCY STEP-DOWN CONVERTER datasheet (Rev. B)	25 jul 2011
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)	11 dic 2018
	Selection guide	Power Management Guide 2018 (Rev. R)	25 jun 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters	22 jun 2018
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold	24 oct 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage	24 oct 2016
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)	17 ago 2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter	29 ene 2015
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)	13 ene 2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it	17 jun 2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.