전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS53915

활성

1.5V~18V 입력, 12A, 동기 SWIFT™ 벅 컨버터(PMBus 포함)

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 12 Vin (min) (V) 1.5 Vin (max) (V) 18 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Enable, Light Load Efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable, Voltage Margining Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iq (typ) (µA) 1350 Duty cycle (max) (%) 80
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 12 Vin (min) (V) 1.5 Vin (max) (V) 18 Switching frequency (min) (kHz) 250 Switching frequency (max) (kHz) 1000 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Enable, Light Load Efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable, Voltage Margining Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iq (typ) (µA) 1350 Duty cycle (max) (%) 80
VQFN-CLIP (RVE) 28 15.75 mm² 4.5 x 3.5
  • Integrated 13.8- and 5.9-mΩ MOSFETs Support
    12-A Continuous Output Current
  • Adjustments Available Through PMBus™
    • Voltage Margin and Adjustment
    • Soft-Start Time
    • Power-On Delay
    • VDD UVLO Level
    • Fault Reporting
    • Switching Frequency
    • Supports All Ceramic Output Capacitors
    • Reference Voltage 600 mV ±0.5% Tolerance
    • Output Voltage Range: 0.6 V to 5.5 V
    • D-CAP3™ Control Mode With Fast Load-Step
      Response
    • Auto-Skipping Eco-Mode™ for High Light-
      Load Efficiency
    • FCCM for Tight Output Ripple and Voltage
      Requirements
    • Eight Selectable Frequency Settings from
      200 kHz to 1 MHz
    • 3.5 mm × 4.5 mm, 28-Pin, QFN Package
  • Integrated 13.8- and 5.9-mΩ MOSFETs Support
    12-A Continuous Output Current
  • Adjustments Available Through PMBus™
    • Voltage Margin and Adjustment
    • Soft-Start Time
    • Power-On Delay
    • VDD UVLO Level
    • Fault Reporting
    • Switching Frequency
    • Supports All Ceramic Output Capacitors
    • Reference Voltage 600 mV ±0.5% Tolerance
    • Output Voltage Range: 0.6 V to 5.5 V
    • D-CAP3™ Control Mode With Fast Load-Step
      Response
    • Auto-Skipping Eco-Mode™ for High Light-
      Load Efficiency
    • FCCM for Tight Output Ripple and Voltage
      Requirements
    • Eight Selectable Frequency Settings from
      200 kHz to 1 MHz
    • 3.5 mm × 4.5 mm, 28-Pin, QFN Package

The TPS53915 is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low external-component count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.5% 0.6-V reference, and an integrated boost switch. Competitive features include very-low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation. The device also features programmability and fault report via PMBus™ to simplify the power supply design.

A forced continuous conduction mode helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS53915 is available in a 28-pin QFN package and is specified from –40°C to 85°C ambient temperature.

The TPS53915 is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode. The device offers ease-of-use and low external-component count for space-conscious power systems.

This device features high-performance integrated MOSFETs, accurate 0.5% 0.6-V reference, and an integrated boost switch. Competitive features include very-low external-component count, fast load-transient response, auto-skip mode operation, internal soft-start control, and no requirement for compensation. The device also features programmability and fault report via PMBus™ to simplify the power supply design.

A forced continuous conduction mode helps meet tight voltage regulation accuracy requirements for performance DSPs and FPGAs. The TPS53915 is available in a 28-pin QFN package and is specified from –40°C to 85°C ambient temperature.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS548A20 활성 1.5V~20V 입력, 15A, 동기 SWIFT™ 벅 컨버터 Offers a wider VIN and temperature range with a higher current and frequency synchronization.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS53515 활성 1.5V~18V 입력, 12A, 동기 SWIFT™ 벅 컨버터 Offers same functionality without PMBus.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
14개 모두 보기
유형 직함 날짜
* Data sheet TPS53915 1.5 to 18-V (4.5 to 25-V Bias) Input, 12-A Synchronous Step-Down SWIFT™ Converter With PMBus™ datasheet (Rev. B) PDF | HTML 2014/12/08
User guide TPS53915 Step-Down Converter Evaluation Module User's Guide (Rev. C) PDF | HTML 2021/11/08
Application note DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 2021/05/04
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Application note Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 2020/01/08
Selection guide SWIFT DC/DC Converters Selector Guide (Rev. G) 2019/02/06
Application note Unified Ground Connection Recommendation on TPS53K- Integrated FET-Converter Dev 2017/01/25
Application note Accuracy-Enhanced Ramp-Generation Design for D-CAP3 Modulation (Rev. A) 2016/04/25
Application note SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 2016/02/22
White paper Choosing the Right Variable Frequency Buck Regulator Control Strategy 2015/10/02
Technical article Select the correct PMBus POL solution for your application PDF | HTML 2015/08/03
Application note Not All Jitter Is Created Equal (Rev. A) 2015/07/04
Technical article D-CAP3 – A sequel better than the original PDF | HTML 2015/05/07
Application note D-CAP(TM) Mode With All-Ceramic Output Capacitor Application 2011/02/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS53915EVM-587 — TPS53915EVM-587 단일 동기 스텝다운 컨버터 평가 모듈

The TPS53915EVM-587 is designed to help the user easily evaluate and test the operation and functionality of the TPS53915 buck converter. The EVM converts a 1.5-V to 18-V input voltage to a regulated 1.2-V output voltage that delivers up to 12 A in a 4.5x3.5mm QFN package. This board includes (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
애플리케이션 소프트웨어 및 프레임워크

FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어

Fusion Digital Power™ GUI(그래픽 사용자 인터페이스) 소프트웨어는 선별된 텍사스 인스트루먼트 디지털 파워 컨트롤러와 시퀀서/상태 모니터를 구성하고 모니터링하는 데 사용됩니다. 이 애플리케이션은 PMBus 프로토콜을 사용하여 TI USB 어댑터를 경유, 직렬 버스를 통해 장치와 통신합니다.
시뮬레이션 모델

TPS53915 PSpice Transient Model

SLUM411.ZIP (129 KB) - PSpice Model
시뮬레이션 모델

TPS53915 TINA-TI Startup Transient Reference Design (Rev. A)

SLUM412A.TSC (235 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS53915 TINA-TI Steady State Transient Reference Design

SLUM556.TSC (239 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS53915 TINA-TI Transient Spice Model (Rev. A)

SLUM413A.ZIP (77 KB) - TINA-TI Spice Model
계산 툴

SLURB03 TPS53513 TPS53515 TPS53915 Excel Calculator and Layout Checklist

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS53513 1.5V~18V 입력, 8A, 동기 SWIFT™ 벅 컨버터 TPS53515 1.5V~18V 입력, 12A, 동기 SWIFT™ 벅 컨버터 TPS53915 1.5V~18V 입력, 12A, 동기 SWIFT™ 벅 컨버터(PMBus 포함)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-CLIP (RVE) 28 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상