전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS546D24A

활성

핀 스트래핑 및 PMBus®가 포함된 2.95V~16V 입력, 적층형 40A, 동기 SWIFT™ 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
TPS546D24S 활성 확장된 보안을 지원하는 2.95V~16V, 적층형 40A, 동기 SWIFT™ 스텝다운 PMBus® 컨버터 Extended write protection

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 40 Vin (min) (V) 2.95 Vin (max) (V) 16 Switching frequency (min) (kHz) 225 Switching frequency (max) (kHz) 1500 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Forced PWM, Frequency synchronization, Over Current Protection, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, Voltage Margining Control mode current mode Vout (min) (V) 0.25 Vout (max) (V) 5.5 Iq (typ) (µA) 9000 Duty cycle (max) (%) 85
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 40 Vin (min) (V) 2.95 Vin (max) (V) 16 Switching frequency (min) (kHz) 225 Switching frequency (max) (kHz) 1500 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Forced PWM, Frequency synchronization, Over Current Protection, PMBus, Phase Interleaving, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, Voltage Margining Control mode current mode Vout (min) (V) 0.25 Vout (max) (V) 5.5 Iq (typ) (µA) 9000 Duty cycle (max) (%) 85
LQFN-CLIP (RVF) 40 35 mm² 7 x 5
  • Split rail support: 2.95-V to 16-V PVIN; 2.95-V to 18-V AVIN (4-VIN VDD5 for switching)
  • Integrated 4.5-mΩ/0.9-mΩ MOSFETs
  • Average current mode control with selectable internal compensation
  • 2×, 3×, 4× stackable with current sharing up to 160 A, supporting a single address per output
  • Selectable 0.5-V to 5.5-V output via pin strap or 0.25-V to 5.5-V using PMBus VOUT_COMMAND
  • Extensive PMBus command set with telemetry for VOUT, IOUT and internal die temperature
  • Differential remote sensing with internal FB divider for < 1% VOUT error –40°C to +150°C TJ
  • AVS and margining capabilities through PMBus
  • MSEL pins pin programming PMBus defaults
  • 12 Selectable switching frequencies from 225 kHz to 1.5 MHz (8 pin-strap options)
  • Frequency sync in/sync out
  • Supports prebiased output
  • Supports strongly coupled inductor
  • 7-mm × 5-mm × 1.5-mm, 40-pin QFN, pitch = 0.5 mm
  • Create a Custom Design Using the TPS546D24A With WEBENCH Power Designer
  • Split rail support: 2.95-V to 16-V PVIN; 2.95-V to 18-V AVIN (4-VIN VDD5 for switching)
  • Integrated 4.5-mΩ/0.9-mΩ MOSFETs
  • Average current mode control with selectable internal compensation
  • 2×, 3×, 4× stackable with current sharing up to 160 A, supporting a single address per output
  • Selectable 0.5-V to 5.5-V output via pin strap or 0.25-V to 5.5-V using PMBus VOUT_COMMAND
  • Extensive PMBus command set with telemetry for VOUT, IOUT and internal die temperature
  • Differential remote sensing with internal FB divider for < 1% VOUT error –40°C to +150°C TJ
  • AVS and margining capabilities through PMBus
  • MSEL pins pin programming PMBus defaults
  • 12 Selectable switching frequencies from 225 kHz to 1.5 MHz (8 pin-strap options)
  • Frequency sync in/sync out
  • Supports prebiased output
  • Supports strongly coupled inductor
  • 7-mm × 5-mm × 1.5-mm, 40-pin QFN, pitch = 0.5 mm
  • Create a Custom Design Using the TPS546D24A With WEBENCH Power Designer

The TPS546D24A is a highly integrated, non-isolated DC/DC converter capable of high frequency operation and 40-A current output from a 7-mm × 5-mm package. Two, three, and four TPS546D24A devices can be interconnected to provide up to 160 A on a single output. The device has an option to overdrive the internal 5-V LDO with an external 5-V supply via the VDD5 pin to improve efficiency and reduce power dissipation of the converter.

The TPS546D24A uses a proprietary fixed-frequency current-mode control with input feedforward and selectable internal compensation components for minimal size and stability over a wide range of output capacitances.

The PMBus interface with 1-MHz clock support gives a convenient, standardized digital interface for converter configuration as well as monitoring of key parameters including output voltage, output current, and internal die temperature. Response to fault conditions can be set to restart, latch off, or ignore, depending on system requirements. Back-channel communication between stacked devices enables all TPS546D24A converters powering a single output rail to share a single address to simplify system software/firmware design. Key parameters including output voltage, switching frequency, soft-start time, and overcurrent fault limits can also be configured through BOM selection without PMBus communication to support program free power-up.

The TPS546D24A is a highly integrated, non-isolated DC/DC converter capable of high frequency operation and 40-A current output from a 7-mm × 5-mm package. Two, three, and four TPS546D24A devices can be interconnected to provide up to 160 A on a single output. The device has an option to overdrive the internal 5-V LDO with an external 5-V supply via the VDD5 pin to improve efficiency and reduce power dissipation of the converter.

The TPS546D24A uses a proprietary fixed-frequency current-mode control with input feedforward and selectable internal compensation components for minimal size and stability over a wide range of output capacitances.

The PMBus interface with 1-MHz clock support gives a convenient, standardized digital interface for converter configuration as well as monitoring of key parameters including output voltage, output current, and internal die temperature. Response to fault conditions can be set to restart, latch off, or ignore, depending on system requirements. Back-channel communication between stacked devices enables all TPS546D24A converters powering a single output rail to share a single address to simplify system software/firmware design. Key parameters including output voltage, switching frequency, soft-start time, and overcurrent fault limits can also be configured through BOM selection without PMBus communication to support program free power-up.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS546A24A 활성 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 10A, 동기 SWIFT™ 벅 컨버터 Lower current equivalent part.
TPS546B24A 활성 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 20A, 동기형 SWIFT™ 벅 컨버터 Lower current equivalent part.
비교 대상 장치와 유사한 기능
TPSM8S6C24 활성 확장된 보안을 지원하는 2.95V~16V 입력, 35A, 4x 스택형 PMBus® 전원 모듈 Module version with integrated inductor and extended security

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
17개 모두 보기
유형 직함 날짜
* Data sheet TPS546D24A 2.95-V to 16-V, 40-A, up to 4x Stackable, PMBus Buck Converter datasheet (Rev. A) 2020/11/05
Application brief Solving power design challenges in oscilloscope applications PDF | HTML 2023/10/31
Application note Collection of DC/DC Buck Regulator Technical Documentation (Rev. A) PDF | HTML 2022/11/28
Application note Point-of-Load Solutions for Network Interface Cards (NIC) PDF | HTML 2021/09/08
EVM User's guide TPS546D24A 2-Phase SWIFT™ Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021/08/20
Application note DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 2021/05/04
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Technical article 3 big benefits of small cells PDF | HTML 2020/05/26
Application note Minimize On-Time-Jitter and Ripple by Optimizing Compensation 2020/05/11
Technical article Advantages of scalability: from Peter Parker to pin-strapping PDF | HTML 2020/04/30
Technical article SoC power design: 3 steps to a thermally optimized power supply PDF | HTML 2020/03/09
Application note Powering the TPS546D24A Device Family From a Single 3.3-V Input Power Supply (Rev. A) 2020/03/04
Technical article 35 years later, APEC continues to set the tone for innovation in power management PDF | HTML 2020/02/27
White paper Power solution options for data center applications (Rev. A) 2020/02/27
Application note Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 2020/01/08
Application note Achieving Better than 1% Output Voltage Accuracy with TPS546D24A 2019/12/01
White paper Small Cells, Big Impact: Designing Power Soutions for 5G Applications 2019/06/26

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS546A24AEVM-1PH — 2.95V~18V, 10A 동기형 벅 평가 모듈

The TPS546A24AEVM-1PH is an evaluation module (EVM) for the TPS546A24A 10-A buck converter. The TPS546A24A device is a stackable synchronous buck with PMBus interface that can operate from a nominal 2.95-V to 18-V supply. The device allows programming and monitoring through the PMBus interface.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS546B24AEVM-1PH — 2.95V~18V, 20A 동기형 벅 평가 모듈

The TPS546B24AEVM-1PH is an evaluation module (EVM) for the TPS546B24A 20-A buck converter. The TPS546B24A device is a stackable synchronous buck with PMBus interface that can operate from a nominal 2.95-V to 18-V supply. The device allows programming and monitoring through the PMBus interface.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS546D24AEVM — 고정 주파수 동기 벅 컨버터 2상 평가 모듈

The TPS546D24AEVM-2PH evaluation module (EVM) is a two-phase buck converter with two TPS546D24A devices. The TPS546D24A device is a stackable synchronous buck with PMBus interface that can operate from a nominal 2.95-V to 16-V supply. The device allows programming and monitoring via the PMBus (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
애플리케이션 소프트웨어 및 프레임워크

FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어

Fusion Digital Power™ GUI(그래픽 사용자 인터페이스) 소프트웨어는 선별된 텍사스 인스트루먼트 디지털 파워 컨트롤러와 시퀀서/상태 모니터를 구성하고 모니터링하는 데 사용됩니다. 이 애플리케이션은 PMBus 프로토콜을 사용하여 TI USB 어댑터를 경유, 직렬 버스를 통해 장치와 통신합니다.
시뮬레이션 모델

TPS546D24A IBIS Model

SLUM704.ZIP (98 KB) - IBIS Model
시뮬레이션 모델

TPS546D24A PSpice Average Model

SLUM705.ZIP (69 KB) - PSpice Model
시뮬레이션 모델

TPS546D24A PSpice Transient Model

SLUM707.ZIP (257 KB) - PSpice Model
시뮬레이션 모델

TPS546D24A PSpice Two Phase Transient Model

SLUM708.ZIP (189 KB) - PSpice Model
시뮬레이션 모델

TPS546D24A SIMPLIS Transient and Average Model

SLUM725.ZIP (1791 KB) - SIMPLIS Model
계산 툴

SLUC686 TPS546x24A Compensation and Pin-Strap Resistor Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS546A24A 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 10A, 동기 SWIFT™ 벅 컨버터 TPS546B24A 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 20A, 동기형 SWIFT™ 벅 컨버터 TPS546D24A 핀 스트래핑 및 PMBus®가 포함된 2.95V~16V 입력, 적층형 40A, 동기 SWIFT™ 스텝다운 컨버터
계산 툴

SLURB01 TPS546D24A TPS546B24A TPS546A24A Excel Calculator Tool and Checklist

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS546A24A 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 10A, 동기 SWIFT™ 벅 컨버터 TPS546B24A 핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 20A, 동기형 SWIFT™ 벅 컨버터 TPS546D24A 핀 스트래핑 및 PMBus®가 포함된 2.95V~16V 입력, 적층형 40A, 동기 SWIFT™ 스텝다운 컨버터
레퍼런스 디자인

PMP21254 — FET 컨트롤러가 통합된 160A, 4상 레퍼런스 설계

이 레퍼런스 설계는 5V 또는 12V 레일로 고전류, 저전압 ASIC 및 FPGA에 전원을 공급하는 것입니다. 설계는 고밀도에 최적화되어 있으며, 원하는 경우 전류, 전압 및 온도 원격 측정을 지원하는 PMBus를 지원합니다. 테스트 보고서가 포함되어 있습니다.
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP21814 — 통신 프로세서 전력을 위한 4상, 160A 동기 벅 컨버터 레퍼런스 설계

This reference design uses four TPS546D24A converters with integrated MOSFETs to support a full load of 160A at a 0.9V output. The system operates at a switching frequency of 650 kHz and has a PMBus interface that can be used to configure key converter parameters, including internal compensation. (...)
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
LQFN-CLIP (RVF) 40 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상