首頁 電源管理 LED 驅動器 背光 LED 驅動器

LM3633

現行

適於智慧型手機的完整照明電源解決方案

產品詳細資料

Number of channels 3 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 41 Type Inductive Switching frequency (max) (kHz) 1100 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 90 Topology Boost Features Adjustable Switch Frequency, Analog Dimming, CABC, Enable/Shutdown, I2C control, Integrated Switch, OVP, Synchronous Rectification, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 3 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 41 Type Inductive Switching frequency (max) (kHz) 1100 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 90 Topology Boost Features Adjustable Switch Frequency, Analog Dimming, CABC, Enable/Shutdown, I2C control, Integrated Switch, OVP, Synchronous Rectification, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YFQ) 20 3.96 mm² 2.2 x 1.8
  • Drives Three Parallel High-Voltage LED Strings
    for Display and Keypad Lighting
  • High-Voltage Strings Capable of up to 40-V
    Output Voltage and up to 90% Efficiency
  • Up to 30-mA per Current Sink
    (Both Backlight and Indicator)
  • 11-Bit High-Voltage LED Dimming
  • PWM Input for Content Adjustable Brightness
    Control (CABC)
  • Integrated 1-A/40-V MOSFET
  • Adaptive Boost Output to LED Voltages
  • Six Low-Voltage Current Sinks for Indicator LEDs
  • Integrated Charge Pump for Improved Efficiency
    and VIN Operating Range
  • Internal Pattern Generation Engine for Each
    Indicator LED
  • Fully Configurable LED Grouping and Control
  • Four Programmable Overvoltage Protection
    Thresholds (16 V, 24 V, 32 V, and 40 V)
  • Programmable 500-kHz and 1-MHz
    Switching Frequency
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • 27 mm2 Total Solution Size
  • Drives Three Parallel High-Voltage LED Strings
    for Display and Keypad Lighting
  • High-Voltage Strings Capable of up to 40-V
    Output Voltage and up to 90% Efficiency
  • Up to 30-mA per Current Sink
    (Both Backlight and Indicator)
  • 11-Bit High-Voltage LED Dimming
  • PWM Input for Content Adjustable Brightness
    Control (CABC)
  • Integrated 1-A/40-V MOSFET
  • Adaptive Boost Output to LED Voltages
  • Six Low-Voltage Current Sinks for Indicator LEDs
  • Integrated Charge Pump for Improved Efficiency
    and VIN Operating Range
  • Internal Pattern Generation Engine for Each
    Indicator LED
  • Fully Configurable LED Grouping and Control
  • Four Programmable Overvoltage Protection
    Thresholds (16 V, 24 V, 32 V, and 40 V)
  • Programmable 500-kHz and 1-MHz
    Switching Frequency
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • 27 mm2 Total Solution Size

The LM3633 11-bit LED driver provides high-performance backlight dimming for 1, 2, or 3 parallel high-voltage LED strings while delivering up to 90% efficiency. The boost converter with integrated 1-A, 40-V MOSFET automatically adjusts to LED forward voltage to minimize headroom voltage and effectively improve LED efficiency.

The LM3633 is a complete power source for backlight, keypad, and indicator LEDs in smartphone handsets. The high-voltage inductive boost converter provides the power for three parallel LED strings (HVLED1, HVLED2 and HVLED3). The integrated charge pump provides the bias for the six low-voltage indicator LEDs (LVLED1-LVLED6). All low-voltage current sinks can have a programmable pattern modulated onto their output current for a wide variety of blinking patterns.

An additional feature is a Pulse Width Modulation (PWM) control input for content adjustable backlight control, which can be used to control any high-voltage current sink.

The LM3633 is fully programmable via an I2C-compatible interface. The device operates over a 2.7-V to 5.5-V input voltage range and a −40°C to 85°C temperature range.

For all available packages, see the orderable addendum at the end of the datasheet.

The LM3633 11-bit LED driver provides high-performance backlight dimming for 1, 2, or 3 parallel high-voltage LED strings while delivering up to 90% efficiency. The boost converter with integrated 1-A, 40-V MOSFET automatically adjusts to LED forward voltage to minimize headroom voltage and effectively improve LED efficiency.

The LM3633 is a complete power source for backlight, keypad, and indicator LEDs in smartphone handsets. The high-voltage inductive boost converter provides the power for three parallel LED strings (HVLED1, HVLED2 and HVLED3). The integrated charge pump provides the bias for the six low-voltage indicator LEDs (LVLED1-LVLED6). All low-voltage current sinks can have a programmable pattern modulated onto their output current for a wide variety of blinking patterns.

An additional feature is a Pulse Width Modulation (PWM) control input for content adjustable backlight control, which can be used to control any high-voltage current sink.

The LM3633 is fully programmable via an I2C-compatible interface. The device operates over a 2.7-V to 5.5-V input voltage range and a −40°C to 85°C temperature range.

For all available packages, see the orderable addendum at the end of the datasheet.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet LM3633 Complete Lighting Power Solution for Smartphone Handsets datasheet PDF | HTML 2014年 6月 4日
White paper Common LED Functions and LED Driver Design Considerations 2020年 9月 21日
Application note Analog PWM Dimming in White-LED Drivers 2016年 12月 21日
Application note Inductor Selection in Boost Converters for LCD Backlight Applications 2016年 10月 24日
Application note Schottky Diode Selection in Asynchronous Boost Converters 2016年 9月 6日
EVM User's guide LM3633 User's Guide 2014年 6月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

驅動程式或資料庫

LM3633SW-LINUX — 適用於 LM3633 的 Linux 驅動程式

The Linux driver supports the LM3633 LMU (Lighting Management Unit) device. The Linux driver supports communication through the I2C bus and interfaces with various sub-systems.

 

Linux Mainline Status

Available in Linux Main line: No
Available through git.ti.com: (...)

韌體

SNVC166 USB2ANY Firmware Loader

支援產品和硬體

支援產品和硬體

產品
背光 LED 驅動器
LM3633 適於智慧型手機的完整照明電源解決方案
硬體開發
開發板
USB2ANY USB2ANY 介面轉接器
開發模組 (EVM) 的 GUI

SNVC076 LM3633EVMSW GUI Installer

支援產品和硬體

支援產品和硬體

產品
背光 LED 驅動器
LM3633 適於智慧型手機的完整照明電源解決方案
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFQ) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片