首頁 電源管理 LED 驅動器 RGB LED 驅動器
首頁
電源管理
LED 驅動器
RGB LED 驅動器

LP5890

現行

具 16 位元 PWM 調光和超低功耗的 48x16 LED 矩陣驅動器

立即訂購
產品規格表

LP5890

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 48 LED current per channel (mA) 20 LED configuration Matrix Topology Current Sink, Linear Vin (min) (V) 2.5 Vin (max) (V) 5.5 Iout (max) (A) 0.96 Features Constant current, Current control, Enable/Shutdown, PWM dimming, SPI control, Thermal shutdown Iq (typ) (mA) 2.4 Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 48 LED current per channel (mA) 20 LED configuration Matrix Topology Current Sink, Linear Vin (min) (V) 2.5 Vin (max) (V) 5.5 Iout (max) (A) 0.96 Features Constant current, Current control, Enable/Shutdown, PWM dimming, SPI control, Thermal shutdown Iq (typ) (mA) 2.4 Operating temperature range (°C) -40 to 85 Rating Catalog
NFBGA (ZXL) 96 36 mm² 6 x 6 VQFN (RRF) 76 81 mm² 9 x 9
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V–5.5 V
    • VR/G/B voltage range: 2.5 V–5.5 V
  • 48-current source channels from 0.2 mA–20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.26 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.9 mA with 50-MHz GCLK
    • Intelligent power saving mode
  • Built-in SRAM to support 1 - 32 multiplexing,
    • Single device drives up to 16 × 48 LEDs or 16 × 16 RGB LEDs
    • Dual devices stackable drive up to 32 × 96 LEDs or 32 × 32 RGB LEDs
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK/SIN/SOUT
    • External 50-MHz (max.) SCLK
    • Internal frequency multiplier to support GCLK range from 40 MHz–160 MHz
  • Optimized display performance
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open, short, and weak short detection and removal
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V–5.5 V
    • VR/G/B voltage range: 2.5 V–5.5 V
  • 48-current source channels from 0.2 mA–20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.26 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.9 mA with 50-MHz GCLK
    • Intelligent power saving mode
  • Built-in SRAM to support 1 - 32 multiplexing,
    • Single device drives up to 16 × 48 LEDs or 16 × 16 RGB LEDs
    • Dual devices stackable drive up to 32 × 96 LEDs or 32 × 32 RGB LEDs
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK/SIN/SOUT
    • External 50-MHz (max.) SCLK
    • Internal frequency multiplier to support GCLK range from 40 MHz–160 MHz
  • Optimized display performance
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open, short, and weak short detection and removal

Electronic devices are becoming smarter, requiring to use larger quantity of LEDs for animation and indication purposes and high performance LED matrix driver is required to improve user experience with small solution size.

The LP5890 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. A single LP5890 is capable of driving 16 × 16 RGB LED pixels while stacking two LP5890s can drive 32 × 32 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the LP5890 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.9 mA).

The LP5890 implements a high speed transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 50-MHz SCLK and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in multiple LED matrix applications: Upper and downside ghosting, Non-uniformity in low grayscale, Coupling, and Caterpillar caused by open or short LEDs, which make the LP5890 a perfect choice in such applications.

The LP5890 also implements LED open/weak short/short detections and removals during operations and can also report this information to the accompanying digital processor.

Electronic devices are becoming smarter, requiring to use larger quantity of LEDs for animation and indication purposes and high performance LED matrix driver is required to improve user experience with small solution size.

The LP5890 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. A single LP5890 is capable of driving 16 × 16 RGB LED pixels while stacking two LP5890s can drive 32 × 32 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the LP5890 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.9 mA).

The LP5890 implements a high speed transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 50-MHz SCLK and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in multiple LED matrix applications: Upper and downside ghosting, Non-uniformity in low grayscale, Coupling, and Caterpillar caused by open or short LEDs, which make the LP5890 a perfect choice in such applications.

The LP5890 also implements LED open/weak short/short detections and removals during operations and can also report this information to the accompanying digital processor.
filter 尋找其它 RGB LED 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LP5890 16 × 48 LED Matrix Driver With Ultra-low Power datasheet PDF | HTML 2021年 7月 27日
User guide LP589x(-Q1)/TLC698x Sample Code User's Guide (Rev. A) PDF | HTML 2024年 9月 6日
EVM User's guide LP5890 48x16 Common Cathode Matrix LED Display Driver Evaluation Module (Rev. A) PDF | HTML 2024年 8月 28日
Application note Example of LED Display Screen Design Requirements Based on TLC6983 PDF | HTML 2023年 7月 31日
Certificate LP5890EVM EU RoHS Declaration of Conformity (DoC) 2022年 9月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP5890EVM — 適用於 48 × 16 共陰極矩陣 LED 顯示驅動器的 LP5890 評估模組

LP5890 評估模組 (EVM) 用於評估矩陣 LED 顯示驅動器 LP5890 的特性、運作及使用狀況。LP5890 是一款配備 48 個定電流來源及 16 個掃描 FET 的高度整合共陰極矩陣 LED 顯示驅動器。

使用指南: PDF | HTML
TI.com 無法提供
應用軟體及架構

LP5890EVM-F280039C-SW — LP5890 reference code based on TMS320F280039C (LAUNCHXL-F280039C)

This reference code showcases the ability of the TMS320F280039C device to communicate with the LP5890 LED driver. The code configures the MCU using CLB to drive the LEDs on the EVM.
支援產品和硬體

支援產品和硬體

產品
RGB LED 驅動器
LP5890 — 具 16 位元 PWM 調光和超低功耗的 48x16 LED 矩陣驅動器
硬體開發
開發板
LP5890EVM — 適用於 48 × 16 共陰極矩陣 LED 顯示驅動器的 LP5890 評估模組
下載選項
應用軟體及架構

LP5899DYYEVM-LP5890-F280039C-SW — LP5899 reference code pairing with LP5890 based on TMS320F280039C (LAUNCHXL-F280039C)

This reference code showcases the ability of the TMS320F280039C device to communicate with the LP5899 paired with LP5890 LED driver. The code configures the MCU using SPI to drive the LEDs on the LP5890EVM.
支援產品和硬體

支援產品和硬體

產品
RGB LED 驅動器
LP5890 — 具 16 位元 PWM 調光和超低功耗的 48x16 LED 矩陣驅動器
硬體開發
開發板
LP5890EVM — 適用於 48 × 16 共陰極矩陣 LED 顯示驅動器的 LP5890 評估模組
下載選項
計算工具

SLVRBL9 — LP5890 Registers Map Generation Tool

支援產品和硬體

支援產品和硬體

產品
RGB LED 驅動器
LP5890 — 具 16 位元 PWM 調光和超低功耗的 48x16 LED 矩陣驅動器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
NFBGA (ZXL) 96 Ultra Librarian
VQFN (RRF) 76 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片