首頁 介面 I2C & I3C ICs I2C 通用 I/O (GPIO)
首頁
介面
I2C & I3C ICs
I2C 通用 I/O (GPIO)

TCA9539-Q1

現行

具有中斷、重設和配置暫存器的汽車 16 位元 1.65 至 3.6-V I2C/SMBus I/O 擴展器

立即訂購
產品規格表

TCA9539-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of I/Os 16 Features Configuration registers, Interrupt pin, Reset pin Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 3.6 Addresses 4 Rating Automotive Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
Number of I/Os 16 Features Configuration registers, Interrupt pin, Reset pin Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 3.6 Addresses 4 Rating Automotive Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4
  • AEC-Q100 (Grade 1): Qualified for automotive applications
  • Functional Safety-Capable
  • I2C to parallel port expander
  • Open-drain active-low interrupt output
  • Active-low reset input
  • 5 V tolerant input and output ports
  • Compatible with most microcontrollers
  • 400 kHz Fast I2C bus
  • Polarity inversion register
  • Internal power-on reset
  • No glitch on power up
  • Address by two hardware address pins for use of up to four devices
  • Latched outputs for directly driving LEDs
  • Latch-up performance exceeds 100 mA Per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000-V Human-body model (A114-A)
    • 1000-V Charged-device model (C101)
  • AEC-Q100 (Grade 1): Qualified for automotive applications
  • Functional Safety-Capable
  • I2C to parallel port expander
  • Open-drain active-low interrupt output
  • Active-low reset input
  • 5 V tolerant input and output ports
  • Compatible with most microcontrollers
  • 400 kHz Fast I2C bus
  • Polarity inversion register
  • Internal power-on reset
  • No glitch on power up
  • Address by two hardware address pins for use of up to four devices
  • Latched outputs for directly driving LEDs
  • Latch-up performance exceeds 100 mA Per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000-V Human-body model (A114-A)
    • 1000-V Charged-device model (C101)

The TCA9539-Q1 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus protocol). The device can operate with a power supply voltage (VCC) range from 1.65 V to 3.6 V. The device supports 100 kHz (I2C Standard mode) and 400 kHz (I2C Fast mode) clock frequencies. I/O expanders such as the TCA9539-Q1 provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and other similar devices.

The features of the TCA9539-Q1 include an interrupt that is generated on the INT pin whenever an input port changes state. The A0 and A1 hardware selectable address pins allow up to four TCA9539-Q1 devices on the same I2C bus. The device can be reset to its default state by cycling the power supply and causing a power-on reset. Also, the TCA9539-Q1 has a hardware RESET pin that can be used to reset the device to its default state.

The TCA9539-Q1 I2C I/O expander is qualified for automotive applications.

spacer

The TCA9539-Q1 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus protocol). The device can operate with a power supply voltage (VCC) range from 1.65 V to 3.6 V. The device supports 100 kHz (I2C Standard mode) and 400 kHz (I2C Fast mode) clock frequencies. I/O expanders such as the TCA9539-Q1 provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and other similar devices.

The features of the TCA9539-Q1 include an interrupt that is generated on the INT pin whenever an input port changes state. The A0 and A1 hardware selectable address pins allow up to four TCA9539-Q1 devices on the same I2C bus. The device can be reset to its default state by cycling the power supply and causing a power-on reset. Also, the TCA9539-Q1 has a hardware RESET pin that can be used to reset the device to its default state.

The TCA9539-Q1 I2C I/O expander is qualified for automotive applications.

spacer
filter 尋找其它 I2C 通用 I/O (GPIO)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TCA6408A-Q1 現行 具中斷、重設和配置暫存器的車用 8 位元轉換 I2C/SMBus I/O 擴展器 8-bit IO expander with level translation
TCAL9539-Q1 現行 具有中斷、重設和快捷 I/O 配置的車用 16 位元低電壓、I²C-匯流排/SMBus I/O 擴展器 Enhanced version with wider supply voltage range and agile I/O configuration registers

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
類型 標題 日期
* Data sheet TCA9539-Q1 Automotive Low Voltage 16-Bit I2C and SMBus Low-Power I/O Expander with Interrupt Output, Reset Pin, and Configuration Registers datasheet (Rev. D) PDF | HTML 2021年 10月 8日
Application note I2C: What is the Auto Increment Feature? PDF | HTML 2024年 7月 5日
Application note Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024年 7月 3日
Application brief Zonal Architecture and MCU I/O Expansion PDF | HTML 2023年 2月 2日
Functional safety information TCA9539-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 2021年 4月 20日
Application note I2C Dynamic Addressing 2019年 4月 25日
Application note Choosing the Correct I2C Device for New Designs PDF | HTML 2016年 9月 7日
Application note Understanding the I2C Bus PDF | HTML 2015年 6月 30日
Application note Maximum Clock Frequency of I2C Bus Using Repeaters 2015年 5月 15日
Application note I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015年 2月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

IO-EXPANDER-EVM — IO-EXPANDER-EVM：I2C 和 SMBus IO 擴展器評估模組

IO 擴展器評估模組 (EVM) 可讓您評估 TI 的 SMBus 與 I2C IO 擴展器線路裝置產品組合。TCA6424A 和 TCA9539 都安裝在電路板上。24 針腳 TSSOP 元件封裝還支援 TCA6408A、TCA6416A、TCA9534、TCA9534A、TCA9535、TCA9538, TCA9554、TCA9554A 和 TCA9555。

使用指南: PDF
TI.com 無法提供
模擬型號

TCA9539 IBIS Model

SCPM025.ZIP (98 KB) - IBIS Model
下載
設計工具

I2C-DESIGNER — I2C 設計工具

Use the I2C Designer tool to quickly resolve conflicts in addressing, voltage level and frequency in I2C based designs. Enter master and slave inputs to automatically generate an I2C tree or easily build a custom solution. This tool will help designers save time and comply with the I2C standard (...)
在雲端評估
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDEP-01017 — 使用 Jacinto™ ADAS 處理器的串級成像雷達擷取參考設計

This reference design provides a processing foundation for a cascaded imaging radar system. Cascade radar devices can support front, long-range (LRR) beam-forming applications as well as corner- and side-cascade radar and sensor fusion systems. This reference design provides qualified developers (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00580 — 通過車規認證的 16 位元旋轉相位差編碼器參考設計

在許多情況下，人們更喜歡在觸控式螢幕上使用旋鈕。  此解決方案減少與微控制器的必要連接，監控旋轉相位差編碼器的旋轉方向和距離。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00296 — 汽車車身控制模組驅動器參考設計

TIDA-00296 is a reference design that highlights TI's high-side and low-side relay, motor, and load driver portfolios. The loads for this design (door locks, window lifts, seat heaters, HVAC, lamps, and LEDs) were chosen to show the range of loads that a BCM can drive and how TI's solutions fit (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片