TPS63050

現行

具 1-A 開關和可調式緩啓動的 TPS6305x 單電感器降壓升壓

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 2500 Switching frequency (max) (kHz) 2500 Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Power good, Synchronous Rectification, UVLO Fixed Vout (min) (V) 2.5 Vout (max) (V) 5.5 Iq (typ) (µA) 43 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 1
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Vin (min) (V) 2.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 2500 Switching frequency (max) (kHz) 2500 Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Power good, Synchronous Rectification, UVLO Fixed Vout (min) (V) 2.5 Vout (max) (V) 5.5 Iq (typ) (µA) 43 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 1
DSBGA (YFF) 12 2.52000000000000018 mm² 1.4000000000000001 x 1.8 VQFN-HR (RMW) 12 6.25 mm² 2.5 x 2.5
  • Real buck or boost with seamless transition between buck and boost mode
  • 2.5 V to 5.5 V Input voltage range
  • 0.5-A Continuous output current: VIN ≥ 2.5 V,
    VOUT = 3.3 V
  • Adjustable and fixed output voltage version
  • Efficiency > 90% in boost mode and > 95% in buck mode
  • 2.5-MHz Typical switching frequency
  • Adjustable average input current limit
  • Adjustable soft-start time
  • Device quiescent current < 60 µA
  • Automatic power save mode or forced PWM mode
  • Load disconnect during shutdown
  • Overtemperature protection
  • Small 1.6mm x 1.2mm, 12-pin WCSP and 2.5mm x 2.5mm 12-pin HotRod™ QFN package
  • Create a custom design using the:
  • Real buck or boost with seamless transition between buck and boost mode
  • 2.5 V to 5.5 V Input voltage range
  • 0.5-A Continuous output current: VIN ≥ 2.5 V,
    VOUT = 3.3 V
  • Adjustable and fixed output voltage version
  • Efficiency > 90% in boost mode and > 95% in buck mode
  • 2.5-MHz Typical switching frequency
  • Adjustable average input current limit
  • Adjustable soft-start time
  • Device quiescent current < 60 µA
  • Automatic power save mode or forced PWM mode
  • Load disconnect during shutdown
  • Overtemperature protection
  • Small 1.6mm x 1.2mm, 12-pin WCSP and 2.5mm x 2.5mm 12-pin HotRod™ QFN package
  • Create a custom design using the:

The TPS6305x family of devices is a high efficiency, low quiescent-current buck-boost converter, suitable for applications where the input voltage is higher or lower than the output.

Continuous output current can go as high as 500 mA in boost mode and as high as 1 A in buck mode. The maximum average current in the switches is limited to a typical value of 1 A. The TPS6305x family of devices regulate the output voltage over the complete input voltage range by automatically switching between buck or boost mode depending on the input voltage, ensuring seamless transition between modes.

The buck-boost converter is based on a fixed-frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain the highest efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over the complete load current range.

The PFM/PWM pin allows the user to select between automatic-PFM/PWM mode operation and forced-PWM operation. During PWM mode a fixed-frequency of typically 2.5 MHz is used. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 12-pin DSBGA and in a 12-pin HotRod package.

The TPS6305x family of devices is a high efficiency, low quiescent-current buck-boost converter, suitable for applications where the input voltage is higher or lower than the output.

Continuous output current can go as high as 500 mA in boost mode and as high as 1 A in buck mode. The maximum average current in the switches is limited to a typical value of 1 A. The TPS6305x family of devices regulate the output voltage over the complete input voltage range by automatically switching between buck or boost mode depending on the input voltage, ensuring seamless transition between modes.

The buck-boost converter is based on a fixed-frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain the highest efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over the complete load current range.

The PFM/PWM pin allows the user to select between automatic-PFM/PWM mode operation and forced-PWM operation. During PWM mode a fixed-frequency of typically 2.5 MHz is used. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 12-pin DSBGA and in a 12-pin HotRod package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPS631010 現行 3-A 尖峰電流高效率超小型解決方案尺寸降壓升壓轉換器 Upgraded product with 8-µA IQ and smaller WCSP package
功能與所比較的裝置相似
TPS63030 現行 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 Extended input voltage range (down to 1.8 V).
TPS631000 現行 1.5-A 輸出電流、高功率密度降壓升壓轉換器 Upgraded product with 8-uA IQ and smaller SOT package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 22
類型 標題 日期
* Data sheet TPS6305x Single Inductor Buck-Boost With 1-A Switches and Adjustable Soft Start datasheet (Rev. D) PDF | HTML 2017年 5月 11日
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023年 12月 6日
Application note Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. D) 2021年 8月 4日
Application note A Topical Index of TI Low-Power Buck-Boost Converter Application Notes (Rev. A) PDF | HTML 2021年 6月 9日
Application note Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) PDF | HTML 2021年 6月 9日
Application note Improving Load Transient Response for Controlled Loads 2019年 9月 12日
Application brief Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A) 2019年 5月 28日
Application brief Buck-Boost Converters Solving Power Challenges in Optical Modules 2019年 5月 13日
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
Application note Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) 2018年 7月 9日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note High Efficiency Battery Powered High Brightness LED Driver Using the TPS63000 2016年 3月 31日
Technical article Small, efficient buck-boost for portable industrial equipment PDF | HTML 2015年 12月 2日
EVM User's guide User's Guide for TPS63050EVM-679 2015年 7月 13日
EVM User's guide User's Guide for TPS63050EVM-180 2013年 7月 12日
Application note Extending the Soft Start Time in the TPS63010 Buck-Boost Converter 2012年 12月 5日
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 2012年 4月 26日
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011年 9月 19日
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011年 6月 17日
Application note Minimizing Ringing at the Switch Node of a Boost Converter 2006年 9月 15日
Application note Dynamically Adjustable Output Using the TPS63000 2006年 8月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS63050EVM-180 — TPS63050 DSBGA 降壓-升壓穩壓器評估模組

The TPS63050EVM-180 is a customer evaluation module for the TPS63050. The TPS63050 is a small 1.6mm by 1.2mm, WCSP package buck-boost regulator with 1A switches. This EVM is set to an output voltage of 3.3V. Being a buck-boost the input voltage may vary from 2.5V to 5.5V while the EVM maintains the (...)

使用指南: PDF
TI.com 無法提供
開發板

TPS63050EVM-679 — TPS63050 QFN 降壓-升壓穩壓器評估模組

The TPS63050EVM-679 is a customer evaluation module for the TPS63050. The TPS63050 is a small 2.5mm by 2.5mm, RMW package buck-boost regulator with 1A switches. This EVM is set to an output voltage of 3.3V. Being a buck-boost, the input voltage may vary from 2.5V to 5.5V while the EVM maintains the (...)

使用指南: PDF
TI.com 無法提供
模擬型號

Unencrypted TPS63050 PSpice Transient Model Package (Rev. B)

SLVM997B.ZIP (87 KB) - PSpice Model
計算工具

SLVC808 Battery Lifetime Estimator

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
TPS63000 採用 3x3 QFN,具有 1.8A 電流開關的高效降壓-升壓轉換器 TPS63000-Q1 車用 1.8V 至 5.5V 輸入範圍、1.8A 高效降壓/升壓轉換器 TPS63001 採用 3x3 QFN 封裝,具有 1.7A 電流開關、3.3V 固定輸出電壓的 96% 降壓-升壓轉換器 TPS63002 採用 3x3 QFN 封裝,具有 1.7A 電流開關、5V 固定輸出電壓的 96% 降壓-升壓轉換器 TPS63010 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63011 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63012 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63020 具 4A 開關的高效率、單電感器、降壓升壓轉換器 TPS63020-Q1 具 4A 開關的高效率車用單電感器降壓升壓轉換器 TPS63021 具 4A 開關的高效率、單電感器、降壓升壓轉換器 TPS63024 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630241 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630242 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630250 採用 3.7 mm² DSBGA 封裝的 4-A 開關單電感器降壓-升壓轉換器 TPS630251 採用 WCSP 的 4A 開關單電感器降壓-升壓轉換器 TPS630252 採用 WCSP 的 4A 開關單電感器降壓-升壓轉換器 TPS63027 高效率 4.5A 開關單電感器降壓-升壓轉換器 TPS63030 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63031 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63036 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63050 具 1-A 開關和可調式緩啓動的 TPS6305x 單電感器降壓升壓 TPS63051 小型單電感器降壓/升壓轉換器 TPS63060 2.5V 至 12V 輸入電壓、93% 效率、2.25A 開關電流限制、降壓升壓轉換器 TPS63060-EP 具 2-A 開關電流的高輸入電壓降壓升壓轉換器 TPS63061 2.5V 至 12V 輸入電壓、93% 效率、2.25A 開關電流限制、降壓升壓轉換器 TPS63070 寬輸入電壓 (2V-16V) 降壓-升壓轉換器 TPS63700 採用 3x3 QFN 封裝的可調式 -15V 輸出反向 DC/DC 轉換器 TPS63710 採用 3x3 WSON 封裝的低雜訊、1A 同步反向降壓轉換器 TPS63802 採用 QFN/DFN 封裝的 2A 高效率、11-µA 靜態電流降壓升壓轉換器 TPS63805 具有小型解決方案尺寸的 2-A、高效率、11-µA 靜態電流降壓-升壓轉換器 TPS63806 採用小巧 WCSP 具有最佳化的負載步進回應的 2.5A 高效降壓-升壓轉換器 TPS63807 2A、11-uA 靜態電流降壓-升壓轉換器 TPS63810 適用於動態電壓負載,具有 I²C 介面的 2.5A 高效降壓-升壓轉換器 TPS63811 適用於動態電壓負載,具有 I²C 介面的 2.5A 高效降壓-升壓轉換器 TPS63900 具有輸入電流限制和動態電壓調整功能的 1.8V 至 5.5V、75nA IQ 降壓/升壓轉換器
Gerber 檔案

TPS6305x EVM Gerbers

SLVC501.ZIP (317 KB)
參考設計

TIDA-00725 — 高頻寬光學前端參考設計

This reference design implements and measures a complete 120MHz wide bandwidth optical front end comprising a high speed transimpedance amplifier, fully differential amplifier, and high speed 14-bit 160MSPS ADC with JESD204B interface.  Hardware and software are provided to evaluate the (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00886 — 採用單節電池供電的低功耗射頻 PLL 合成器參考設計

The TIDA-00886 consists of the LMX2571,  high-performance, wideband PLLatinum™ low-power RF synthesizer, powered by a single cell battery using TPS63050 a DC-DC buck-boost converter.  The TIDA-00886 shows that the DC-DC buck-boost converter has a small to negligible effect on (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00823 — 具有 AC 與 DC 耦合固定增益放大器的 16 位元 1 GSPS 數位器參考設計

This reference design discusses the use and performance of the Ultra-Wideband, Fixed-gain high-speed amplifier, the LMH3401 to drive the high-speed analog-to-digital converter (ADC), the ADS54J60 device. Different options for common-mode voltages, power supplies, and interfaces are discussed and (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00822 — 具有 AC 與 DC 耦合可變增益放大器的 16 位元 1 GSPS 數位器參考設計

This reference design discusses the use and performance of the Digital Variable-Gain high-speed amplifier, the LMH6401, to drive the high-speed analog-to-digital converter (ADC), the ADS54J60 device. Different options for common-mode voltages, power supplies, and interfaces are discussed and (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 12 Ultra Librarian
VQFN-HR (RMW) 12 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片