TPS65982BB
- Port-power switch
- 5-V, 3-A integrated switch to VBUS
- Over-current limiter, over-voltage protector
- Slew-rate control
- USB low-speed endpoint
- I2C-update capable billboard strings
- Integrated USB mux supports two Type-C ports
- I2C control
- Power management
- Power supply from 3.3-V
- NFBGA package
- 0.5-mm pitch
- Through-hole via compatible for all pins
The TPS65982BB device provides a USB billboard endpoint for USB-PD devices implementing alternate modes. The integrated internal USB multiplexor allows the TPS65982BB to support up to two USB Type-C ports. The TPS65982BB communicates with USB-PD port controllers using an I2C interface to enable the billboard as well as update stored billboard strings. An integrated 5-V load switch provides VBUS protection for an optional USB Type-A port.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS65982BB Dual USB Billboard for USB-PD Devices with Integrated 5-V Load Switch datasheet (Rev. A) | PDF | HTML | 2020年 4月 1日 |
| Certificate | TPS65982BBEVM EU Declaration of Conformity (DoC) | 2020年 9月 14日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS65982BBEVM — TPS65982BB 雙埠 Type-C® 告示板設計評估模組
TPS65982BBEVM 展示了整合式 USB 多工器，可支援兩個 USB Type-C® 埠的告示板功能。另外也包括下行埠 (DFP) USB Type-A 插座，可在不需要告示板功能時將 USB2 訊號和 VBUS 傳遞至裝置。
使用指南: PDF
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| NFBGA (ZBH) | 96 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。