TPS65988DJ
- This device is certified by the USB-IF for PD 3.0
- PD3.0 silicon is required for certification of new USB PD designs
- TID#: 1099
- Article on PD2.0 vs PD3.0
- PD3.0 silicon is required for certification of new USB PD designs
- TPS65988DJ is a Thunderbolt 3 (TBT3) Device PD3.0 controller
- This PD controller is only intended for use in TBT3 device designs
- Refer to Intel Reference Design document number 569174
- If designing something other than a TBT3 device, please refer to www.ti.com/usb-c and E2E guide
- Integrated fully managed power paths:
- Integrated two 5–20 V, 5-A, 25-mΩ bidirectional switches
- UL 2367 cert#: 20190107-E169910
- IEC 62368-1 cert#: US-34617-UL
- Integrated robust power path protection
- Integrated reverse current protection,undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
- Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
- USB Type-C Power Delivery (PD) controller
-
13 configurable GPIOs
- BC1.2 charging support
- USB PD 3.0 certified
- USB Type-C specification certified
- Cable attach and orientation detection
- Integrated VCONN switch
- Physical layer and policy engine
- 3.3-V LDO output for dead battery support
- Power supply from 3.3 V or VBUS source
- 1 I2C primary or secondary port
- 1 I2C primary only port
- 1 I2c secondary only port
-
The TPS65988DJ is a dual-port highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for docking stations or monitors. The TPS65988DJ integrates fully managed power paths with robust protection for a complete USB-C PD solution. This device is featured on Intel’s Reference Design for TBT3 end equipments ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.
索取更多資訊
此 IC 主要用於 Thunderbolt™ 3 裝置。
提供韌體配置工具 GUI 及更多資訊。立即索取
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS65988DJ Dual Port USB Type-C® and USB PD Controller With Integrated Power Switches For Thunderbolt 3 Devices datasheet (Rev. A) | PDF | HTML | 2021年 8月 5日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS65988DJEVM — TPS65988 雙埠 USB Type-C® PD 評估模組
TPS65988DJEVM 是適合雙埠 USB Type-C 和 PD 應用的評估模組設計。方便使用者開發各種電源設定檔和 DisplayPort 等的替代模式，並可偵錯現有的 USB Type-C 及 PD 系統。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RSH) | 56 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。