TPS745
- Input Voltage Range: 1.5 V to 6.0 V
- Adjustable Output Voltage:
- 0.55 V to 5.5 V
- Very Low Dropout:
- 130 mV (max) at 500 mA (3.3 VOUT)
- High Output Accuracy: 0.7% (Typical) and 1% (Maximum Over Temperature)
- Open-Drain Power-Good Output
- IQ: 25 µA (Typical)
- Built-In Soft-Start With Monotonic VOUT Rise
- Package:
- 2-mm × 2-mm WSON-6 (DRV)
- Active Output Discharge
The TPS745 is an adjustable 500-mA low-dropout (LDO) regulator with power-good functionality. This device is available in a small, 6-pin, 2-mm × 2-mm WSON package and consumes very low quiescent current and provides fast line and load transient performance. The TPS745 features an ultra-low dropout of 130 mV at 500 mA that can help improve the power efficiency of the system.
The TPS745 is optimized for a wide variety of applications by supporting an input voltage range from 1.5 V to 6.0 V and an externally adjustable output range of 0.55 V to 5.5 V. The low output voltage enables this LDO to power the modern microcontrollers with lower core voltages.
The TPS745 has a power-good (PG) output that monitors the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for the sequencing multiple power sources in the system.
The TPS745 is stable with small ceramic output capacitors, allowing for a small overall solution size. A precision band-gap and error amplifier provides high accuracy of 0.7% (max) at 25°C and 1% (max) over temperature (85ºC). This device includes integrated thermal shutdown, current limit, and undervoltage lockout (UVLO) features. The TPS745 has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS745 500-mA, High Accuracy, Adjustable LDO With Power-Good in a Small Size Package datasheet (Rev. A) | PDF | HTML | 2018年 12月 14日 |
Application note | An empirical analysis of the impact of board layout on LDO thermal performance | 2019年 2月 22日 | ||
EVM User's guide | TPS746EVM-009 Evaluation Module User's Guide | 2018年 3月 14日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS746EVM-009 — 具有電源良好狀態的 TPS746 可調整 1-A LDO 線性穩壓器評估模組
The TPS746EVM-009 evaluation module (EVM) is designed for a typical configuration to evaluate the operation and performance of the TPS746, which is a 1-A, low-Vin, low-dropout (LDO) voltage regulator with power good.
The EVM circuit board is configured to be a reference design for engineering (...)
D3-3P-DESIGNCORE-CAMERA — D3 嵌入式 DesignCore® 攝影機系列攝影機模組
D3 Embedded 的 DesignCore® 攝影機模組相容於多個 TI ADAS 處理器,如 TDA4。
堅固耐用的 PRO 版本符合 IP67 防塵和防水標準,並且配備符合 AEC-Q100 第 2 級(溫度範圍 -40°C 至 +105°C)的車規影像感應器。
WINSE-3P-ZRT512C-R454B-TI — WINSE R454B 冷媒感測器模組
ZRT512C-R454B-4-A 冷媒感測器模組是一款智慧型紅外線型感測器模組,內建 TI MCU 和類比裝置,採用非分散紅外線 (NDIR) 原則偵測是否存在冷媒,具有良好的選擇性且不依賴於氧氣。這是一款精巧的高性能感測器模組,結合成熟的紅外線氣體偵測技術與微型機械加工及精密電路設計打造而成。該產品易於使用,性能卓越。
TIDA-010231 — 適合光電應用、適用於電弧偵測的類比前端參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WSON (DRV) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。