TUSB1021-Q1
- USB Type-C 2:1 or 1:2 redriver MUX
- Supports USB 3.2 up to 10Gbps
- Ultra-low-power architecture
- Linear redriver with up to 13.3dB equalization at 5GHz
- Sixteen equalization settings
- Configuration through GPIO or I2C
- Supports either 1.8V or 3.3V I2C signaling levels
- Hot-plug capable
- No Host/Device side requirement
- Operates from a single 3.3V supply
- Automotive Grade 2 temperature range: –40°C to 105°C
- Package: 5mm × 7mm, 0.5mm pitch VQFN
The TUSB1021-Q1 is a linear redriver with 1:2 DeMUX or 2:1 MUX function for USB Type-C applications. The TUSB1021-Q1 is intended to reside between a Host and a USB-C receptacle or between a USB device and a USB-C receptacle. The TUSB1021-Q1 supports USB 3.2 data rates up to 10Gbps and supports USB 3.2 low power states (Disconnect, U1, U2, and U3)
The TUSB1021-Q1 provides sixteen levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. The device operates on a single 3.3V supply and comes in an automotive grade 2 temperature range.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TUSB1021-Q1 Automotive USB Type-C® 10 Gbps Linear Redriver MUX and DeMUX datasheet | PDF | HTML | 2024年 9月 23日 |
| Application note | TUSB521-Q1 and TUSB1021-Q1 Configuration Guidelines | PDF | HTML | 2024年 11月 6日 | |
| EVM User's guide | TUSB1021-Q1 Evaluation Model | PDF | HTML | 2024年 9月 26日 | |
| Application note | TUSB521-Q1 and TUSB1021-Q1 Schematic Checklist | PDF | HTML | 2024年 8月 26日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TUSB1021Q1-EVM — TUSB1021-Q1 評估模組
TUSB1021-Q1 是線性轉接驅動開關，可支援最高 10Gbps 的資料速率。此裝置採用第五代 USB 轉接驅動器技術。TUSB1021Q1-EVM 可與一個上游主機/集線器以及兩個下游裝置和集線器搭配使用，一併展現 TUSB1021-Q1 可提供的多工器功能與轉接驅動功能。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGF) | 40 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。