TPS54KB20
Synchroner 25-A-Abwärtswandler (4-V- bis 16-V-Eingang) mit differentieller Fernerfassung
TPS54KB20
- 4V to 16V input voltage range
- 3.1V to 5.3V external VCC bias support
- 5.8mΩ and 2.3mΩ MOSFETs
- 25A continuous output current
- Optimized 16-pin WQFN-HR package for efficiency and thermal performance
- ±0.5% reference (VREF) for TJ = –40°C to +125°C
- VREF to 5.5V output voltage range
- Differential remote sense
- D-CAP4 with ultra-fast load-step response
- Supports all ceramic output capacitors
- Selectable Auto-skip Eco-mode for high light-load efficiency
- Programmable current limit with RILIM
- Selectable switching frequency: 800kHz, 1.1MHz, 1.4MHz
- Programmable soft-start time
- Prebiased start-up capability
- Open-drain power-good output
- Valley overcurrent limit protection
- Overvoltage and undervoltage fault protection
- Pin compatible with 30A TPS54KC23
The TPS54KB2x device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components. The device is well-designed for space-constrained data center applications.
The TPS54KB2x device has differential remote sense, high-performance integrated MOSFETs, and an accurate ±0.5% reference over the specified operating junction temperature range. The device features accurate load regulation and line regulation, Eco-mode or FCCM operation, programmable settings through the MSEL pin and programmable soft start.
The TPS54KB2x device is a lead-free device. The device is RoHS compliant without exemption.
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TPS54KB20EVM — TPS54KB20 Abwärtswandler-Evaluierungsmodul
Das TPS54KB20-Evaluierungsmodul (EVM) verfügt über einen 4-V- bis 16-V-Eingang, 25 A, Fernerfassung, D-CAP4&Trade; Abwärtswandler. Der TPS54KB20 verwendet den D-CAP4™-Steuermodus für ein schnelles Einschwingverhalten und verbessert durch die Desensibilisierung der Leistungsabhängigkeit von (...)
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
WQFN-FCRLF (RZR) | 16 | Ultra Librarian |
WQFN-FCRLF (RZR) | 16 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.