Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)

TPS552882-Q1

AKTIV

36 V, 16 A, Abwärts/Aufwärts-Wandler, AEC-Q100-qualifiziert

Jetzt bestellen
Datenblatt

TPS552882-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
VQFN-HR (RPM) 26 14 mm² 4 x 3.5
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Wide input and output voltage range
    • Wide input voltage range: 2.7 V to 36 V
    • Wide output voltage range: 0.8 V to 22 V
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Adjustable output voltage compensation for voltage droop over the cable
  • Programmable PFM and FPWM mode at light load
  • Programmable output current limit by sensing resistor
  • ±1% reference voltage accuracy
  • Fixed 4-ms soft-start time
  • Create a custom design using the TPS552882-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Wide input and output voltage range
    • Wide input voltage range: 2.7 V to 36 V
    • Wide output voltage range: 0.8 V to 22 V
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Adjustable output voltage compensation for voltage droop over the cable
  • Programmable PFM and FPWM mode at light load
  • Programmable output current limit by sensing resistor
  • ±1% reference voltage accuracy
  • Fixed 4-ms soft-start time
  • Create a custom design using the TPS552882-Q1 with the WEBENCH Power Designer

The TPS552882-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS552882-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882-Q1 uses external resistor divider to set the output voltage with 1.2-V intenral reference voltage. The TPS552882-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS552882-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS552882-Q1 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS552882-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS552882-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.

The TPS552882-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS552882-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882-Q1 uses external resistor divider to set the output voltage with 1.2-V intenral reference voltage. The TPS552882-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS552882-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS552882-Q1 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS552882-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS552882-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.
filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
LM5176-Q1 AKTIV Synchroner Abwärts-Aufwärtsregler, großer VIN-Bereich bis 55 V, 4 Schalter, AEC-Q100-qualifiziert Use LM5176-Q1 controller for higher power
NEU TPS552872-Q1 AKTIV Vollständig integrierter Abwärts-/Aufwärtswandler, 36 V, 4 A (Automobilindustrie) 36-V, 4-A full integrated buck-boost converter, AEC-Q100 qualified

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Typ Titel Datum
* Data sheet TPS552882-Q1 36-V, 16-A Buck-boost Converter datasheet (Rev. A) PDF | HTML 02 Dez 2021
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 30 Apr 2024
Functional safety information TPS55288x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 10 Aug 2022
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 Feb 2021
Application note TPS55288 Layout Guideline (Rev. B) PDF | HTML 20 Dez 2020
Application note How to Achieve Low EMI with TPS55288 Buck-Boost Converter PDF | HTML 02 Sep 2020
Application brief USB Type C Power Delivery Source with TPS65987 and TPS55288 PDF | HTML 06 Mär 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS552882EVM-2MHZ — TPS552882 Evaluierungsmodul für Abwärts-/Aufwärtswandler, 36 V, 16 A, nicht für I2C

The TPS552882 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS552882 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application. The TPS552882 (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Evaluierungsplatine

TPS552882EVM-400KHZ — TPS552882 Evaluierungsmodul für Abwärts-/Aufwärtswandler, 400 kHz Betriebsfrequenz, nicht für I2C

The TPS552882 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS552882 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application. The TPS552882 (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationsmodell

TPS55288 encrypted PSpice model

SLVMDD9.ZIP (192 KB) - PSpice Model
Herunterladen
Berechnungstool

SLVRBF9 — TPS55288 Design Calculation V1.0

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC- und DC/DC-Wandler (integrierter FET)
TPS55288 — Abwärts-/Aufwärtswandler 36 V, 16 A mit PPS-Steuerung TPS55288-Q1 — Abwärts/Aufwärtswandler, 36 V, 16 A mit I2C-Steuerung, AEC-Q100-qualifiziert TPS552882-Q1 — 36 V, 16 A, Abwärts/Aufwärts-Wandler, AEC-Q100-qualifiziert
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN-HR (RPM) 26 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos