Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

TPS61378-Q1

AKTIV

Synchroner Aufwärtswandler mit 18,5-V-Ausgang, 4,8 A und Lasttrennung

Produktdetails

Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Boost Type Converter Vin (min) (V) 2.3 Vin (max) (V) 14 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Control mode current mode Vout (min) (V) 4 Vout (max) (V) 18.5 Iq (typ) (µA) 35 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.8
Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Boost Type Converter Vin (min) (V) 2.3 Vin (max) (V) 14 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Control mode current mode Vout (min) (V) 4 Vout (max) (V) 18.5 Iq (typ) (µA) 35 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.8
WQFN (RTE) 16 9 mm² 3 x 3
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3 V to 14 V
    • Programmable output voltage range: 4.0 V to 18.5 V
    • Fixed output options: 5 V, 5.25 V, and 5.5 V
    • Programmable peak current limit: 1 A to 4.8 A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200 kHz to 2.2 MHz
    • Spread spectrum frequency modulation
    • Optional clock synchronization
  • Minimize solution size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50 mΩ/50 mΩ/100 mΩ
    • Support up to 2.2 MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25-µA quiescent current into VIN pin
    • 0.5-µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short circuit protection
    • Power good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8-A load from 3.3-V to 9-V conversion
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3 V to 14 V
    • Programmable output voltage range: 4.0 V to 18.5 V
    • Fixed output options: 5 V, 5.25 V, and 5.5 V
    • Programmable peak current limit: 1 A to 4.8 A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200 kHz to 2.2 MHz
    • Spread spectrum frequency modulation
    • Optional clock synchronization
  • Minimize solution size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50 mΩ/50 mΩ/100 mΩ
    • Support up to 2.2 MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25-µA quiescent current into VIN pin
    • 0.5-µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short circuit protection
    • Power good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8-A load from 3.3-V to 9-V conversion

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3 V to 14 V while the maximal output voltage covers up to 18.5 V. The switching current limit is programmable from 1 A to 4.8 A. The device consumes 25-µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200 kHz to 2.2 MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. It supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. It also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3-mm × 3-mm 16-pin QFN package with wettable flank.

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3 V to 14 V while the maximal output voltage covers up to 18.5 V. The switching current limit is programmable from 1 A to 4.8 A. The device consumes 25-µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200 kHz to 2.2 MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. It supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. It also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3-mm × 3-mm 16-pin QFN package with wettable flank.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
TPS61379-Q1 AKTIV Synchroner Aufwärtswandler mit 25 mA niedrigem Ruhestrom This product has a fixed 2-A switch current limit.
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
LM5157-Q1 AKTIV 6 A, 50 V, 2,2 MHz breiter VIN-Aufwärts-, Flyback- und SEPIC-Wandler mit Dual-Random-Spread-Spektrum LM5157-Q1 with higher VIN range (up to 45 V) and VOUT range (up to 48 V).
TPS55340-Q1 AKTIV Integrierter Boost/SEPIC/Flyback-DC-DC-Regler, 5 A, 40 V, mit großem Eingangsbereich, AEC-Q100-quali Higher VIN range (up to 38 V) and VOUT range (up to 38 V).

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPS61378-Q1 25-µA Quiescent Current Synchronous Boost Converter with Load Disconnect datasheet (Rev. D) PDF | HTML 19 Jul 2021
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 Feb 2021
Functional safety information TPS61378-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. C) PDF | HTML 20 Okt 2020
User guide TPS61378Q1EVM-060 Evaluation Module (Rev. A) PDF | HTML 11 Sep 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS61378Q1EVM-060 — TPS61378QRTE-Evaluierungsmodul

The TPS61378Q1EVM-060 allows you to evaluate the TPS61378-Q1 fully-integrated synchronous boost converter with optional load disconnect function. The device is suitable as a post-boost for automotive applications, boosting from a regulated 3.3-V or 5-V rail with a programmable current limit up to (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TPS61379Q1EVM-082 — Evaluierungsmodul für synchrone Aufwärtswandler, 25-uA-IQ, TPS61379Q1

Der TPS61379-Q1 ist ein vollintegrierter synchroner Aufwärtswandler mit integrierte Lasttrennung. Der Baustein eignet sich als Post-Boost für Automobilanwendungen mit einer Strombegrenzung von 2nbsp;A und einer maximalen Ausgangsspannung von 18,5nbsp;V. Er unterstützt eine Eingangsspannung von (...)
Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPS61378-Q1 FPWM Version PSpice model

SLVMDF2.ZIP (92 KB) - PSpice Model
Berechnungstool

SLVRBG8 TPS61378-Q1 Calculation Tool

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC- und DC/DC-Wandler (integrierter FET)
TPS61378-Q1 Synchroner Aufwärtswandler mit 18,5-V-Ausgang, 4,8 A und Lasttrennung
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTE) 16 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos