Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)
NUEVO

LM70880-Q1

ACTIVO

Convertidor reductor síncrono CC/CC de baja EMI, entrada de 4.5 V a 80 V y 8 A, de alta densidad par

Haga su pedido ahora
Hoja de datos

LM70880-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 80 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Stackable, Thermal shutdown, UVLO adjustable EMI features Spread Spectrum Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (µA) 6.5 Duty cycle (max) (%) 99
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 80 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Stackable, Thermal shutdown, UVLO adjustable EMI features Spread Spectrum Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (µA) 6.5 Duty cycle (max) (%) 99
VQFN (RRX) 29 36 mm² 6 x 6
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5V to 80V
    • Shutdown mode current: 2.3µA
    • No-load IQ regulating 48V to 5V: 8.2µA
    • 1% accurate, fixed 3.3V, 5V, 12V, or adjustable outputs from 0.8V to 55V
    • Dual-phase operation enabling output currents up to 16A
  • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power good, and thermal shutdown
    • Internal or external loop compensation
  • 6mm × 6mm thermally optimized, RoHS compliant, QFN-29 package with Pb-free plating
  • Create a custom design using the LM708x0-Q1 with WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5V to 80V
    • Shutdown mode current: 2.3µA
    • No-load IQ regulating 48V to 5V: 8.2µA
    • 1% accurate, fixed 3.3V, 5V, 12V, or adjustable outputs from 0.8V to 55V
    • Dual-phase operation enabling output currents up to 16A
  • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power good, and thermal shutdown
    • Internal or external loop compensation
  • 6mm × 6mm thermally optimized, RoHS compliant, QFN-29 package with Pb-free plating
  • Create a custom design using the LM708x0-Q1 with WEBENCH Power Designer

The LM708x0-Q1 is a family of low-IQ, wide-VIN synchronous buck converters designed for an input voltage range of 4.5V to 80V and delivering up to 8A of output current at fixed output voltages of 3.3V, 5V, 12V, or an adjustable output.

The LM708x0-Q1 uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM708x0-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 16A of output current.

The LM708x0-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines low-frequency triangular and high-frequency cycle-by-cycle random modulations for improved EMI performance across a wide range of frequency bands.

Additional features of the LM708x0-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.8ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM708x0-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).

The LM708x0-Q1 is a family of low-IQ, wide-VIN synchronous buck converters designed for an input voltage range of 4.5V to 80V and delivering up to 8A of output current at fixed output voltages of 3.3V, 5V, 12V, or an adjustable output.

The LM708x0-Q1 uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM708x0-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 16A of output current.

The LM708x0-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines low-frequency triangular and high-frequency cycle-by-cycle random modulations for improved EMI performance across a wide range of frequency bands.

Additional features of the LM708x0-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.8ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM708x0-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet LM708x0-Q1 80V, 8A/6A/4A, Automotive, High-Efficiency Buck Converters Optimized for High Power Density datasheet (Rev. A) PDF | HTML 21 jun 2024
Application note Controller to Converter – Design Considerations for 24V and 48V Systems PDF | HTML 02 oct 2024
Functional safety information LM708x0-Q1 Functional Safety FIT Rate, FMD, and Pin FMA (Rev. A) PDF | HTML 27 ago 2024
EVM User's guide LM70880-Q1 Buck Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 06 mar 2024
Application note Reducing Conducted EMI in a Buck Converter for 48 V Automotive Applications PDF | HTML 13 dic 2023
Certificate LM70880QEVM EU Declaration of Conformity (DoC) 20 jul 2023
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 21 abr 2021
Technical article Using DC/DCs buck converters to power modern safety features in commercial vehicle PDF | HTML 27 jul 2020
Technical article How to meet European Commission ADAS requirements with TI DC/DC converters PDF | HTML 09 may 2019
Technical article Top three qualities to consider when designing a video doorbell power supply PDF | HTML 25 sep 2018
Application brief Improving RF Power Amplifier Efficiency in 5G Radio Systems 05 sep 2018
White paper An overview of radiated EMI specifications for power supplies 05 jun 2018
Technical article Effects of IC package on EMI performance PDF | HTML 22 may 2018
White paper An overview of conducted EMI specifications for power supplies 01 feb 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM70880QEVM — Módulo de evaluación LM70880-Q1

El módulo de evaluación de alta densidad LM70880QEVM está diseñado para utilizar un carril de entrada de alta tensión regulado o no regulado que va de 8 V a 72 V para producir una tensión de salida estrictamente regulada de 5 V en corrientes de carga de hasta 8 A. El LM70880-Q1 ofrece alta (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

LM70880-Q1 PSpice Transient model (Rev. A)

SNVMCD7A.ZIP (3292 KB) - PSpice Model
Descargar
Herramienta de cálculo

LM70XX0-CALC — LM70XX0 quickstart design tool calculator

Quickstart calculator for LM70XX0
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
LM704A0-Q1 — Convertidor reductor síncrono CC/CC de baja EMI, entrada de 4.5 V a 45 V y 10 A, de alta densidad y LM70660 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM706A0 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM706A0-Q1 — Convertidor reductor síncrono CC/CC de baja EMI, entrada de 4.5 V a 65 V y 10 A, de alta densidad y LM70840 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM70840-Q1 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM70860 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM70860-Q1 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM70880 — Convertidor reductor síncrono CC/CC de baja interferencia electromagnética (EMI), entrada de 4.5 V a LM70880-Q1 — Convertidor reductor síncrono CC/CC de baja EMI, entrada de 4.5 V a 80 V y 8 A, de alta densidad par
Descargar
Diseños de referencia

PMP31291 — Diseño de referencia de reductor-elevador inversor de 27 W

Este diseño de referencia es una fuente de alimentación flexible y compacta que proporciona un carril de tensión de salida negativa. El diseño incluye un dispositivo LM70880-Q1 (un convertidor reductor de alta eficiencia de 80 V y 8 A). El valor de tensión de salida se puede seleccionar entre tres (...)
Test report: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RRX) 29 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos