The TL431LI-Q1 is a three-terminal adjustable shunt regulator, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. The output voltage can be set to any value between Vref (approximately 2.495 V) and 36 V with two external resistors. The device has a typical output impedance of 0.3 Ω. Its active output circuitry provides a very sharp turn-on characteristic, making it an excellent replacement for Zener diodes in many applications, such as onboard regulation, adjustable power supplies, and switching power supplies. This device is a pin-to-pin alternative to the industry standard TL431-Q1 with optimized Iref and IIdev performance. The lower Iref and IIdev values of the TL431LI-Q1 enable designers to achieve higher system accuracy and lower leakage current. The TL432LI-Q1 has exactly the same functionality and electrical specifications as the TL431LI-Q1, but has a different pinout for the DBZ package.
The TL431LI-Q1 is offered in two grades, with initial tolerances (at 25°C) of 0.5% and 1%, for the B and A grade, respectively. The TL431LI-Q1 is also available in two temperature grades: grade 1 (denoted by a ’Q’ in the part number), and grade 0 (denoted by a ’E’ in the part number), which represent maximum ambient operating temperatures of 125°C and 150°C respectively. The TL43xLI-Q1 is characterized for operation from –40°C to 125°C for grade 1, and –40°C to 150°C for grade 0, and its low output drift versus temperature ensures good stability over the entire temperature range.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TL431LI-Q1 / TL432LI-Q1 Programmable Shunt Regulator With Optimized Reference Current datasheet (Rev. A) | PDF | HTML | 14 nov 2019 |
| Analog Design Journal | High-power, low-cost, discrete linear pre-regulator for automotive rear lights | 21 dic 2020 | ||
| Functional safety information | TL43xLI-Q1 Functional Safety FIT Rate and Failure Mode Distribution | 18 dic 2019 | ||
| Application note | Current Supply Monitoring with the TL431LI-Q1 | 07 oct 2019 | ||
| Application note | Designing With the Improved TL431LI (Rev. A) | 28 jun 2019 | ||
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28 jun 2019 | ||
| Application note | Implementing Voltage References and Supervisors Into Your Traction Inverter Desi | 22 may 2019 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.