Inicio Gestión de la energía Controladores CA/CC y CC/CC (FET externo)

TPS51215A

ACTIVO

Controlador D-CAP2 monofásico con entrada de 3 V a 28 V y VID de 2 bits

Detalles del producto

Vin (min) (V) 3 Vin (max) (V) 28 Iout (max) (A) 30 Operating temperature range (°C) -40 to 125 Control mode D-CAP2 Rating Catalog Vout (min) (V) 0 Vout (max) (V) 1.8 Features Adjustable current limit, Enable, Light Load Efficiency, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, VID: 2-bit Iq (typ) (µA) 320 Duty cycle (max) (%) 60 Number of phases 1
Vin (min) (V) 3 Vin (max) (V) 28 Iout (max) (A) 30 Operating temperature range (°C) -40 to 125 Control mode D-CAP2 Rating Catalog Vout (min) (V) 0 Vout (max) (V) 1.8 Features Adjustable current limit, Enable, Light Load Efficiency, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, VID: 2-bit Iq (typ) (µA) 320 Duty cycle (max) (%) 60 Number of phases 1
WQFN (RUK) 20 9 mm² 3 x 3
  • Differential voltage feedback
  • DC compensation for accurate regulation
  • Wide input voltage range: 3 V to 28 V
  • Flexible, 2-bit VID supports output voltage from 0.5-V to 2.0-V and 0-V VOUT
  • D-CAP2™ mode at 600kHz for Ultra-Low/Low ESR Output Capacitor
    • 4700 ppm/°C, low-side RDS(on) current sensing
    • Programmable soft-start time and output voltage transition time
    • Built-in output discharge
    • Power good output
    • Integrated boost switch
    • Built-in OVP/UVP/OCP
    • Thermal shutdown (non-latched)
    • 3-mm × 3-mm, 20-Pin, QFN (RUK) package
    • Differential voltage feedback
    • DC compensation for accurate regulation
    • Wide input voltage range: 3 V to 28 V
    • Flexible, 2-bit VID supports output voltage from 0.5-V to 2.0-V and 0-V VOUT
    • D-CAP2™ mode at 600kHz for Ultra-Low/Low ESR Output Capacitor
      • 4700 ppm/°C, low-side RDS(on) current sensing
      • Programmable soft-start time and output voltage transition time
      • Built-in output discharge
      • Power good output
      • Integrated boost switch
      • Built-in OVP/UVP/OCP
      • Thermal shutdown (non-latched)
      • 3-mm × 3-mm, 20-Pin, QFN (RUK) package

      The TPS51215A is a single-phase, D-CAP2™ synchronous buck controller with a 2-bit VID input supporting 0 V and three other independent externally programmable output voltage levels, where full external programmability of the voltage level, step setting and voltage-change slew rate is desired. It is used for Intel IMVP8/9 applications where multiple voltage levels are desired.

      The TPS51215A supports all POS/SPCAP and/or all ceramic MLCC output capacitor options in applications where remote sense is a requirement. Tight DC load regulation is achieved through external programmable integrator capacitor. The TPS51215A provides full protection suite, including OVP, OCL, 5-V UVLO and thermal shutdown. It supports the conversion voltage up to 28 V, and output voltages adjustable from 0.5 V to 2 V.

      The TPS51215A is available in the 3 mm × 3 mm, QFN, 0.4-mm pitch package and is specified from –40°C to 125°C.

      The TPS51215A is a single-phase, D-CAP2™ synchronous buck controller with a 2-bit VID input supporting 0 V and three other independent externally programmable output voltage levels, where full external programmability of the voltage level, step setting and voltage-change slew rate is desired. It is used for Intel IMVP8/9 applications where multiple voltage levels are desired.

      The TPS51215A supports all POS/SPCAP and/or all ceramic MLCC output capacitor options in applications where remote sense is a requirement. Tight DC load regulation is achieved through external programmable integrator capacitor. The TPS51215A provides full protection suite, including OVP, OCL, 5-V UVLO and thermal shutdown. It supports the conversion voltage up to 28 V, and output voltages adjustable from 0.5 V to 2 V.

      The TPS51215A is available in the 3 mm × 3 mm, QFN, 0.4-mm pitch package and is specified from –40°C to 125°C.

      Descargar Ver vídeo con transcripción Video

      Productos similares que pueden interesarle

      open-in-new Comparar alternativas
      Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
      TPS51518 ACTIVO Controlador D-CAP y D-CAP2 monofásico con controlador VID flexible de 2 bits Lower current controller, does not support 0-V output with its adjustable VID settings.

      Diseño y desarrollo

      Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

      Placa de evaluación

      TPS51215AEVM — Módulo de evaluación de controlador reductor síncrono de entrada de 3 V a 28 V

      The TPS51215AEVM evaluation module (EVM) is used to evaluate the TPS51215A device. The TPS51215A is a single phase, D-CAP2TM synchronous buck controller with 2-bits VID inputs that can select up to four independent output voltage with fixed voltage transition slew rate.
      Guía del usuario: PDF | HTML
      Modelo de simulación

      TPS51215A PSpice Transient Model (Rev. A)

      SLUM737A.ZIP (139 KB) - PSpice Model
      Diseños de referencia

      TIDA-050057 — Diseño de referencia de la solución de alimentación para el carril VCCIN_AUX de Alder Lake y Raptor 

      Este diseño de referencia de fuente de alimentación es compatible con el carril VCCIN_AUX en la plataforma Intel® Alder Lake y Raptor Lake. El uso del controlador TPS51215A combinado con un amplificador operacional podría admitir las funciones de control, incluido el control VID, la línea de (...)
      Design guide: PDF
      Encapsulado Pines Símbolos CAD, huellas y modelos 3D
      WQFN (RUK) 20 Ultra Librarian

      Pedidos y calidad

      Información incluida:
      • RoHS
      • REACH
      • Marcado del dispositivo
      • Acabado de plomo/material de la bola
      • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
      • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
      • Contenido del material
      • Resumen de calificaciones
      • Monitoreo continuo de confiabilidad
      Información incluida:
      • Lugar de fabricación
      • Lugar de ensamblaje

      Soporte y capacitación

      Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

      El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

      Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

      Videos