Convertidor reductor sincrónico de 4 V a 16 V y 20 A

alarmNotificaciones Haga su pedido ahora

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 20 Vin (min) (V) 4 Vin (max) (V) 16 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1200 Features Adjustable soft start, Differential Remote Sense, Eco-mode, Hiccup mode protection, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Under Voltage Protection Control mode D-CAP4 Vout (min) (V) 0.5 Vout (max) (V) 5.5 Iq (typ) (µA) 1000 Duty cycle (max) (%) 30
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 20 Vin (min) (V) 4 Vin (max) (V) 16 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1200 Features Adjustable soft start, Differential Remote Sense, Eco-mode, Hiccup mode protection, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Under Voltage Protection Control mode D-CAP4 Vout (min) (V) 0.5 Vout (max) (V) 5.5 Iq (typ) (µA) 1000 Duty cycle (max) (%) 30
WQFN-HR (VAN) 19 9 mm² 3 x 3
  • 4V to 16V input voltage range
  • 3.13V to 5.3V external VCC bias support
  • 10mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 20A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.0% reference (VREF) for TJ = –40°C to +125°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency:
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 12A TPS548A23 and 6A TPS548623
  • 4V to 16V input voltage range
  • 3.13V to 5.3V external VCC bias support
  • 10mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 20A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.0% reference (VREF) for TJ = –40°C to +125°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency:
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 12A TPS548A23 and 6A TPS548623

The TPS548B23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components. The device is well-designed for space-constrained data center applications.

The TPS548B23 device has differential remote sense, high-performance integrated MOSFETs, and an accurate ±1.0% internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continous Conduction Mode (FCCM) operation. Pinstrap options allow for configuration of the overcurrent limit, fault response, internal or external feedback , output voltage selection, switching frequency, and soft-start time..

The internal 3.0V LDO can be over-driven with an external 3.3V to 5V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548B23 device is a lead-free device. The device is RoHS compliant without exemption.

The TPS548B23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components. The device is well-designed for space-constrained data center applications.

The TPS548B23 device has differential remote sense, high-performance integrated MOSFETs, and an accurate ±1.0% internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continous Conduction Mode (FCCM) operation. Pinstrap options allow for configuration of the overcurrent limit, fault response, internal or external feedback , output voltage selection, switching frequency, and soft-start time..

The internal 3.0V LDO can be over-driven with an external 3.3V to 5V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548B23 device is a lead-free device. The device is RoHS compliant without exemption.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS548B23 4V to 16V Input, 20 A, Remote Sense, D-CAP4, Synchronous Buck Converter datasheet PDF | HTML 30 sep 2024
Application note Point-of-Load Designs in Data Center Applications for Intel Xeon Sapphire Rapids Scalable Processors (Rev. C) PDF | HTML 09 oct 2024
Application brief Solving Power Design Challenges in Enterprise SSD Applications PDF | HTML 23 sep 2024
EVM User's guide TPS548B23 Step-Down Converter Evaluation Module User's Guide PDF | HTML 18 sep 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS548B23EVM — Módulo de evaluación TPS548B23

El módulo de evaluación (EVM) TPS548B23 está diseñado para proporcionar una configuración rápida para evaluar el dispositivo TPS548B23 y familiarizarse con él. Este EVM puede suministrar una corriente de carga continua de hasta 20 A y funciona dentro de un rango de tensión de entrada de 8 V a 16 V (...)
Guía del usuario: PDF | HTML
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN-HR (VAN) 19 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos