Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)

TPS55288-Q1

ACTIVO

Convertidor reductor de impulso de 36 V y 16 A con control I2C, con certificación AEC-Q100

Haga su pedido ahora
Hoja de datos

TPS55288-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
VQFN-HR (RPM) 26 14 mm² 4 x 3.5
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.7 V to 36 V
    • Programmable output voltage range: 0.8 V to 22 V with 20-mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35 A with 50-mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Create a custom design using the TPS55288-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.7 V to 36 V
    • Programmable output voltage range: 0.8 V to 22 V with 20-mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35 A with 50-mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Create a custom design using the TPS55288-Q1 with the WEBENCH Power Designer

The TPS55288-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS55288-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS55288-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. With the programmable output voltage and output current limit through I2C interface, the TPS55288-Q1 is fully compliant to the USB PD specification. The TPS55288-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS55288-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55288-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS55288-Q1 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55288-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55288-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.

The TPS55288-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS55288-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS55288-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. With the programmable output voltage and output current limit through I2C interface, the TPS55288-Q1 is fully compliant to the USB PD specification. The TPS55288-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS55288-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55288-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS55288-Q1 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55288-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55288-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM5176-Q1 ACTIVO Controlador elevador-reductor síncrono de 4 interruptores con VIN amplia de 55 V y certificación AEC Use LM5176-Q1 controller for higher power

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet TPS55288-Q1 36-V, 16-A Buck-boost Converter with I2C Interface datasheet (Rev. A) PDF | HTML 02 dic 2021
Functional safety information TPS55288x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 10 ago 2022
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 feb 2021
Application note TPS55288 Layout Guideline (Rev. B) PDF | HTML 20 dic 2020
Application note How to Achieve Low EMI with TPS55288 Buck-Boost Converter PDF | HTML 02 sep 2020
Application brief USB Type C Power Delivery Source with TPS65987 and TPS55288 PDF | HTML 06 mar 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS55288EVM-045 — EVM de convertidor reductor de impulso TPS55288 con frecuencia de funcionamiento de 400 kHz

The TPS55288 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails.

The TPS55288 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application.

The TPS55288 has (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

TPS55288EVM-053 — Módulo de evaluación de convertidor reductor de impulso TPS55288 con frecuencia de funcionamiento de

The TPS55288 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS55288 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application.

The TPS55288 has (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
GUI para el módulo de evaluación (EVM)

TPS55288-EVM-GUI — Interfaz gráfica de usuario para TPS55288EVM

The TPS55288EVM GUI is a windows-based software GUI to control the TPS55288EVM-045 and TPS55288EVM-053 evaluation modules through I²C command.
Guía del usuario: PDF | HTML
View Options
Modelo de simulación

TPS55288 encrypted PSpice model

SLVMDD9.ZIP (192 KB) - PSpice Model
Descargar
Herramienta de cálculo

SLVRBF9 — TPS55288 Design Calculation V1.0

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS55288 — Convertidor reductor de impulso de 16 A y 36 V con control PPS TPS55288-Q1 — Convertidor reductor de impulso de 36 V y 16 A con control I2C, con certificación AEC-Q100 TPS552882-Q1 — Convertidor reductor de impulso de 16 A y 36 V, con certificación AEC-Q100
Descargar
Diseños de referencia

PMP40933 — Diseño de referencia de cargador de corriente continua de 120 W con clasificación CISPR 25 de clase 

Este diseño de referencia es un diseño optimizado para la interferencia electromagnética (EMI) para un cargador de suministro de energía (PD) USB de tipo C® dual automotriz con 60 W por puerto. El TPS25772-Q1 se utiliza como controlador de DP de tipo C dual con regulador reductor-elevador. El (...)
Test report: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (RPM) 26 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos