Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)

TPS55289-Q1

ACTIVO

Convertidor reductor-elevador totalmente integrado de 36 V y 8 A con interfaz de circuito interinteg

Detalles del producto

Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Converter Vin (min) (V) 3 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 22 Iq (typ) (µA) 760 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 8
Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Converter Vin (min) (V) 3 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 22 Iq (typ) (µA) 760 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 8
VQFN-HR (RYQ) 21 15 mm² 5 x 3
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 3.0V to 36V
    • Programmable output voltage range: 0.8V to 22V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 96% efficiency at VIN = 12V, VOUT = 20V and IOUT = 3A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200kHz to 2.2MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8A average inductor current limit
  • Small solution size
    • Maximum switching frequency up to 2.2MHz
    • 3.0mm × 5.0mm HotRod™ QFN package
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 3.0V to 36V
    • Programmable output voltage range: 0.8V to 22V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 96% efficiency at VIN = 12V, VOUT = 20V and IOUT = 3A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200kHz to 2.2MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8A average inductor current limit
  • Small solution size
    • Maximum switching frequency up to 2.2MHz
    • 3.0mm × 5.0mm HotRod™ QFN package

The TPS55289-Q1 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289-Q1 integrates four MOSFET switches providing a compact solution for USB Power Delivery (USB PD) application.

The TPS55289-Q1 has up to 36V input voltage capability. Through the I2C interface, the output voltage of the TPS55289-Q1 can be programmed from 0.8V to 22V with 10mV step. When working in boost mode, it can deliver 60W from a 12V input voltage. It is capable of delivering 45W from 9V input voltage.

The TPS55289-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200kHz to 2.2MHz by an external resistor and can be synchronized to an external clock. The TPS55289-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS55289-Q1 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55289-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0mm × 5.0mm QFN package.

The TPS55289-Q1 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289-Q1 integrates four MOSFET switches providing a compact solution for USB Power Delivery (USB PD) application.

The TPS55289-Q1 has up to 36V input voltage capability. Through the I2C interface, the output voltage of the TPS55289-Q1 can be programmed from 0.8V to 22V with 10mV step. When working in boost mode, it can deliver 60W from a 12V input voltage. It is capable of delivering 45W from 9V input voltage.

The TPS55289-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200kHz to 2.2MHz by an external resistor and can be synchronized to an external clock. The TPS55289-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS55289-Q1 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55289-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0mm × 5.0mm QFN package.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS55289-Q1 36V, 8A Buck-Boost Converter with I2 C Interface datasheet PDF | HTML 11 dic 2023
EVM User's guide TPS55289Q1EVM-011 Buck-Boost Converter Evaluation Module User's Guide PDF | HTML 04 dic 2023
Functional safety information TPS55289-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 01 dic 2023
Certificate TPS55289Q1EVM EU Declaration of Conformity (DoC) 08 nov 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS55289EVM — Módulo de evaluación TPS55289 para convertidor reductor/elevador de 36 V, 8 A/4 A, I²C completamente

El TPS55289 es un convertidor reductor‑elevador síncrono optimizado para convertir la tensión de la batería o del adaptador en rieles de suministro de energía. El TPS55289 integra cuatro interruptores MOSFET que proporcionan una solución compacta para la aplicación USB Power Delivery (USB PD).

Guía del usuario: PDF | HTML
Placa de evaluación

TPS55289Q1EVM — TPS55289-Q1 evaluation module

This evaluation module contains the TPS55289-Q1 device, which is a high-performance high-efficiency synchronous buck-boost converter that integrates four MOSFETs. The TPS55289-Q1 is optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS55289-Q1 uses I²C (...)
Guía del usuario: PDF | HTML
Modelo de simulación

TPS55289 Encrypted PSpice Model

SLVMDY0.ZIP (213 KB) - PSpice Model
Diseños de referencia

PMP41092 — Diseño de referencia de cargador doble USB Type-C® y USB PD de 60 W con clasificación CISPR 25 de

Este diseño de referencia es un cargador automotriz de 60 W para USB Type-C® Power Delivery (PD) doble con una potencia máxima de 45 W por puerto. El TPS25772-Q1 se usa como controlador USB Type-C PD doble con regulador buck-boost. El TPS55289-Q1 se usa como regulador buck-boost para otro puerto. (...)
Test report: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (RYQ) 21 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos