Herramienta de cálculo
UCC256304
Controlador resonante LLC de VIN amplio con inicio de alta tensión que permite una potencia en esper
Hoja de datos
Aunque esta producto sigue en producción para dar soporte a diseños anteriores, no lo recomendamos para nuevos diseños. Considere una de estas alternativas:
Pin por pin con la misma funcionalidad que el dispositivo comparado
UCC256304
- Hybrid Hysteretic Control (HHC)
- Best-in-Class Transient Response
- Easy Compensation Design
- Optimized Low Power Features Enable 75 mW
Standby Power Design with PFC on- Advanced Burst Mode
Opto-Coupler Low Power Operation - Helps Enable Compliance to CoC Tier II Standard
- Advanced Burst Mode
- Fast Exit from Burst Mode
- Improved Capacitive Region Avoidance Scheme
- Adaptive Dead-Time
- Internal High-Side Gate Drivers
(0.6-A and 1.2-A Capability) - Robust Soft Start with No Hard Switching
- Over Temperature, Output Over Voltage, Input
Over and Under Voltage Protection with
Three Levels of Over Current Protections - Wide Operating Frequency Range
(35 kHz to 1 MHz) - Nemko Certification for X Cap Discharge Function
- Wide DC Input Range
- Enables Wide AC Input Range
- PFC Startup Not Required For LLC Startup
- Create a Custom Design Using the UCC256304 With the WEBENCH® Power Designer
The UCC256304 is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC stage to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.UCC256304 uses hybrid hysteretic control to provide best in class line and load transient response. The control makes the open loop transfer function a first order system so that it’s very easy to compensate and is always stable with proper frequency compensation.
The UCC256304 is unique in that the controller is able to operate over a large DC input range. This is accomplished by making the input overvoltage sense threshold much larger than the input voltage start threshold. This allows the LLC to startup and enter a low power standby mode without the need to enable the PFC and enables the LLC to accommodate an extensive range of common AC inputs.
UCC256304 provides a highly efficient burst mode with consistent burst power level during each burst on cycle. The burst power level is programmable and adaptively changes with input voltage.
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | UCC256304 Ultra Wide VIN LLC Resonant Controller Enabling Low Standby Power datasheet | PDF | HTML | 04 oct 2017 |
| Application note | Improving Transient Response in LLC Converters Using Hybrid Hysteretic Control (Rev. B) | 07 abr 2021 | ||
| Application note | Migrating to UCC25640x from UCC25630x (Rev. A) | 10 dic 2019 | ||
| Application brief | Exceeding Modern Energy Standards with 'Always On' PFC and LLC Controllers (Rev. B) | 01 ago 2019 | ||
| Application note | Improving ZVS and efficiency in LLC converters | 05 nov 2018 | ||
| EVM User's guide | Using UCC25630-1EVM-291 (Rev. B) | 30 ene 2018 | ||
| Application note | UCC25630x Practical Design Guidelines (Rev. A) | 08 dic 2017 | ||
| Certificate | IEC60065 Certification | 07 nov 2017 | ||
| Certificate | IEC60950 Certification | 07 nov 2017 | ||
| Certificate | IEC62368 Certification | 07 nov 2017 | ||
| Application note | AC Ripple Rejection in AC/DC Systems Using LLC | 31 oct 2017 | ||
| Selection guide | UCC25630x Selection Guide | 29 ago 2017 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
UCC25630-1EVM-291 — Módulo de evaluación UCC256301 de LLC
UCC25630-1EVM-291 is an EVM of LLC resonant half-bridge DC-DC power converter with LLC controller UCC256301. UCC25630-1EVM-291 accepts DC line input from 340Vdc to 410Vdc, AC input voltage from 85 VAC to 264 VAC, and outputs nominal 12Vdc with full load output power 120W, or full output current 10A.
Guía del usuario: PDF
Diseños de referencia
PMP21251 — Diseño de referencia de fuente de alimentación CA-CC sin auxiliares de menos de 90 mW de potencia ul
The PMP21251 reference design uses UCC28056 CRM/DCM PFC controller and UCC256304 enhanced LLC controller with integrated driver to provide 12V/10.8A output (continuous, 14.4A peak) from universal AC input. This design achieves 92.4% peak efficiency at 115VAC input and 94.0% peak efficiency at (...)
Diseños de referencia
TIDA-01494 — Referencia de fuente de alimentación industrial CA/CC robusta, de 24 V y 480 W, con un pico nominal
The TIDA-01494 reference design is a compact, high efficiency, 24-V DC, 480-W nominal, 720-W peak output reference design for industrial AC/DC power supplies. The circuit consists of a front-end continuous conduction mode (CCM) power factor correction (PFC) circuit followed by a robust LLC stage (...)
Diseños de referencia
PMP20795 — Diseño de referencia de convertidor resonante serie LLC de 200 kHz con bajo consumo de energía en es
The PMP20795 reference design uses UCC256301 enhanced LLC controller with integrated driver to provide 24V/12A output from a nominal 380VDC input. UCC256301 provides hybrid hysteresis control (HHC) to enable a fast transient response. In this design, a 1st order system with over 6kHz bandwidth is (...)
Diseños de referencia
PMP40482 — Diseño de referencia de convertidor LLC de una etapa de 250 W con varias salidas
This is a single-stage reference design converting AC input voltage 85-115-V AC to three isolated outputs - 12 V/7.5 A, 60 V/2.5 A, 25 V/0.4 A with one non-isolated output 21 V/0.15 A using the UCC256304 resonant controller. The design is for industrial applications and the bill of materials (BOM) (...)
Diseños de referencia
PMP30521 — 93 % de eficiencia a plena carga (60 % a 125 mW), diseño de referencia CA/CC industrial de 310 W
This reference design is a compact and high efficient two-stage power supply. The front-end stage is a CCM power factor correction (PFC) based on UCC28180.The second stage is based on UCC256304, which drives a resonant 310 W LLC converter with two outputs, 19 V and 56 V. The board does not need (...)
Diseños de referencia
PMP21098 — Diseño de referencia de fuente de alimentación CA/CC de 170 W sin necesidad de ayuda con rendimiento
The PMP21098 reference design uses UCC28056 transition mode PFC controller and UCC25630 enhanced LLC controller with integrated driver to provide 12V/10.8A output (continuous, 14.2A peak) from universal AC input. This design achieves 91.8% peak efficiency at 115VAC input and 93.4% peak efficiency (...)
Diseños de referencia
PMP40281 — Diseño de referencia de tarjeta de control de convertidor resonante LLC
This reference design is a a control card for LLC converter. It integrates all of the essential functions for controlling a LLC converter including the HV start-up, X-capacitor discharge and the drivers for the power FETs. By employing the advanced burst mode, it can also help the LLC converter to (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (DDB) | 14 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.