CC3120MOD
- The CC3120MOD is a Wi-Fi module that includes the CC3120RNMARGK Wi-Fi network processor (NWP).The fully integrated, industrial temperature grade, green module includes all required clocks, serial peripheral interface (SPI) flash, and passives.
- FCC, IC, CE, MIC, and SRRC certified
- Wi-Fi CERTIFIED™ modules, with ability to request certificate transfer for Wi-Fi Alliance members
- Featuring a dedicated Internet-on-a chip™ Wi-Fi NWP that completely offloads Wi-Fi and Internet protocols from the application MCU
- Wi-Fi® modes
- 802.11b/g/n station
- 802.11b/g/n access point (AP) supporting up to four stations
- Wi-Fi Direct client/group owner
- WPA2 personal and enterprise security: WEP, WPA/WPA2 PSK, WPA2 Enterprise (802.1x), WPA3 Persona, and WPA3 Enterprise
- IPv4 and IPv6 TCP/IP stack
- Industry-standard BSD socket application programming interfaces (APIs)
- 16 simultaneous TCP or UDP sockets
- 6 simultaneous TLS and SSL sockets
- Industry-standard BSD socket application programming interfaces (APIs)
- IP addressing: static IP, LLA, DHCPv4, and DHCPv6 with duplicate address detection (DAD)
- SimpleLink™ connection manager for autonomous and fast Wi-Fi connections
- Flexible Wi-Fi provisioning with SmartConfig™ technology, AP mode, and WPS2 options
- RESTful API support using internal HTTP server
- Wide set of security features
- Hardware features
- Separate execution environments
- Device identity
- Networking security
- Personal and enterprise Wi-Fi security
- Secure sockets (SSLv3, TLS1.0/1.1/TLS1.2)
- HTTPS server
- Trusted root-certificate catalog
- TI root-of-trust public key
- Software IP protection
- Secure key storage
- File system security
- Software tamper detection
- Cloning protection
- Hardware features
- Embedded network applications running on a dedicated NWP
- HTTP/HTTPS web server with dynamic user callbacks
- mDNS, DNS-SD, DHCP server
- Ping
- Recovery mechanism – ability to recover to factory defaults
- Wi-Fi TX power
- 17.0 dBm at 1 DSSS
- 13.5 dBm at 54 OFDM
- Wi-Fi RX sensitivity
- –95.0 dBm at 1 DSSS
- –73.5 dBm at 54 OFDM
- Application throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Power-management subsystem
- Integrated DC-DC converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.3 V to 3.6 V
- Advanced low-power modes
- Shutdown: 1 µA
- Hibernate: 5 µA
- Low-power deep sleep (LPDS): 115 µA
- RX traffic: 59 mA at 54 OFDM
- TX traffic: 229 mA at 54 OFDM, maximum power
- Idle connected (MCU in LPDS): 690 µA at DTIM = 1
- Integrated DC-DC converters support a wide range of supply voltage:
- Additional integrated components on module
- 40.0-MHz crystal with internal oscillator
- 32.768-kHz crystal (RTC)
- 32-Mbit SPI serial flash
- RF filter and passive components
- 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm LGA package for easy assembly and low-cost PCB design
- Ambient temperature range: –40°C to +85°C
- Module supports SimpleLink Developers Ecosystem
Add Wi-Fi® to low-cost, low-power MCU for IoT applications. The CC3120MOD is an FCC, IC, CE, MIC, SRRC, and Wi-Fi CERTIFIED™ module that is part of the SimpleLink™ Wi-Fi family, which dramatically simplifies the implementation of Internet connectivity. The CC3120MOD integrates all protocols for Wi-Fi and Internet, which greatly minimize host MCU software requirements. With built-in security protocols, the CC3120MOD solution provides a robust and simple security experience. Additionally, the CC3120MOD is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs, and the TI E2E™ support community. The CC3120MOD is available in an LGA package that is easy to lay out with all required components including serial Flash, RF filter, crystal, and passive components that are fully integrated.
The Wi-Fi network processor subsystem features Wi-Fi Internet-on-a chip™ circuitry and contains an additional dedicated Arm MCU that off-loads many of the networking activities from the host MCU. This subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3120MOD module supports station, access point, and Wi-Fi direct modes. The module supports WPA2 personal and enterprise security and WPA3 personal and enterprise security. This subsystem includes embedded TCP/IP, TLS/SSL stacks, an HTTP server, and multiple Internet protocols. The CC3120MOD module supports a variety of Wi-Fi provisioning methods, including HTTP based on AP mode, SmartConfig™ technology, and WPS2.0.
As part of TI’s SimpleLink Wi-Fi family second generation, the CC3120MOD module introduces the new features and enhanced capabilities, such as the following:
- IPv6
- Enhanced Wi-Fi provisioning
- Optimized low-power management
- Wi-Fi AP connection with up to four stations
- More concurrently opened BSD sockets and up to 16 BSD sockets, of which 6 are secure
- HTTPS support
- RESTful API support
- Asymmetric keys
- Crypto library
The power-management subsystem includes an integrated DC-DC converter with support for a wide range of supply voltages. This subsystem enables low-power consumption modes such as hibernate with RTC and shutdown, which requires approximately 5 µA and 1 µA, respectively.The CC3120MOD module is delivered with a slim and user-friendly host driver to simplify the integration and development of network applications. The host driver can easily be ported to most platforms and operating systems (OS). It is written in strict ANSI-C (C99) and requires minimal platform adaptation layer (porting layer). The CC3120MOD module can connect to any 8-, 16-, or 32-bit MCU over the SPI or UART Interface. The device driver minimizes the host memory footprint requirements of less than 7KB of code memory and 700B of RAM for a TCP client application.
The CC3120MOD module is part of the SimpleLink™ microcontroller (MCU) platform which consists of Wi-Fi, Bluetooth low energy, Sub-1 GHz, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform lets you add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change.
The CC3120MOD modules comes in an easy-to-layout LGA package and is delivered as a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs, and the TI E2E support community. The module family is also part of the SimpleLink MCU portfolio and supports the SimpleLink developers ecosystem. For more information, visit www.ti.com/SimpleLink.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
BOOSTXL-CC3120MOD — SimpleLink™ Wi-Fi® CC3120MOD 無線網路處理器 BoosterPack™ 插入式模組
CC31XXEMUBOOST — 適用於 SimpleLink™ Wi-Fi® CC31xx 的進階模擬套件 BoosterPack™ 插入式模組
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
WIFISTARTERPRO — SimpleLink™ Wi-Fi® Starter Pro
Download on Google play
The SimpleLink™ Wi-Fi® Starter Pro mobile App is a new mobile application for SimpleLink provisioning. It goes along with the embedded provisioning library and example that runs on the device side. The new provisioning release is TI (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 無線電測試工具
SimpleLink Wi-Fi CC31xx 和 CC32xx 裝置專爲物聯網 (IoT) 而建立,包括晶片內建 Wi-Fi、網際網路和穩健執行的安全協定,無需先前的 Wi-Fi 經驗即可加快開發速度。如需有關 CC31xx 和 CC32xx 的詳細資訊,請造訪 (...)
CCSTUDIO — Code Composer Studio™ 整合式開發環境 (IDE)
Code Composer Studio 包含最佳化 C/C++編譯器、原始碼編輯器、專案建立環境、偵錯器、性能評測工具及許多其他功能。直覺式 IDE 可帶領您完成應用程式開發流程的每個步驟。熟悉的工具和介面讓您更容易上手。
Code Composer Studio 結合 (...)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
支援產品和硬體
產品
Wi-Fi 產品
Arm Cortex-M4 MCU
低耗電 2.4-GHz 產品
硬體開發
開發板
開發套件
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 嵌入式程式設計
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
產品
C2000 即時微控制器
Arm 式處理器
工業 mmWave 雷達感測器
汽車 mmWave 雷達感測器
MSP430 微控制器
Wi-Fi 產品
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
低耗電 2.4-GHz 產品
汽車無線連線產品
Sub-1 GHz 無線 MCU
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX 的無線電認證
SIMPLELINK-CC3XXX-REPORTS — Reports: CC3XXX Regulatory Certification
Are you looking for CC31XX or CC32XX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of your product. Within this page you will find the latest certification reports of our Modules as well as our evaluation boards for (...)
支援產品和硬體
產品
Wi-Fi 產品
硬體開發
開發板
開發套件
SIMPLELINK-WIFI-DESIGN-REVIEWS — 適用於 SimpleLink™ Wi-Fi 裝置的硬體設計審查
一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 Wi-Fi 硬體設計審查。
對於以 CC3301 和 CC3300 為架構的設計,請將設計檔案申請直接以電子郵件傳送至 connectivity-wifi-hw-reviews@list.ti.com。您可以從這些裝置的相關產品頁請求存取這些裝置的設計文件。
對於其他所有 CC3xxx (...)
CC3120MOD SimpleLink Wi-Fi and Internet of Things hardware design files
CC3x20 SimpleLink™ Wi-Fi® and Internet of Things Design Checklist (Rev. F)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
QFM (MOB) | 63 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。