產品詳細資料

Processor Arm® Cortex®-M4 Type Module, Wireless MCU Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system FreeRTOS, TI RTOS Certifications CE, FCC, ISED, MIC, SRRC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 16 Features 1 STA, 2 secure sockets, 802.11bgn, IPv4 Security Cryptographic acceleration Rating Catalog Operating temperature range (°C) -20 to 70 Cryptographic accelerators AES, MD5, SHA-2
Processor Arm® Cortex®-M4 Type Module, Wireless MCU Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system FreeRTOS, TI RTOS Certifications CE, FCC, ISED, MIC, SRRC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 16 Features 1 STA, 2 secure sockets, 802.11bgn, IPv4 Security Cryptographic acceleration Rating Catalog Operating temperature range (°C) -20 to 70 Cryptographic accelerators AES, MD5, SHA-2
QFM (MOB) 63 358.75 mm² 20.5 x 17.5
  • CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
  • Fully integrated module includes all required clocks, SPI Flash, and passives
  • Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
  • Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
  • 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
  • Applications MCU subsystem:
    • Arm® Cortex®-M4 core at 80 MHz
    • Embedded memory:
      • Integrated serial Flash
      • RAM (up to 256KB)
      • Peripheral drivers in ROM
    • Hardware crypto engine for advanced hardware security including:
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit parallel camera
    • One Multichannel Audio Serial Port (McASP) interface with support for I2S format
    • One SD (MMC) interface
    • 32-channel Micro Direct Memory Access (µDMA)
    • Two Universal Asynchronous Receivers and Transmitters (UARTs)
    • Two Serial Peripheral Interfaces (SPIs)
    • One Inter-integrated Circuit (I2C)
    • Four General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) mode
    • One Watchdog Timer Module
    • 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 25 individually programmable GPIO pins
  • Wi-Fi network processor subsystem:
    • 802.11 b/g/n radio, baseband, and medium access control
    • TCP/IP Stack
      • Eight simultaneous TCP, UDP, or RAW sockets
      • Two simultaneous TLS v1.2 or SSL 3.0 sockets
    • ARP, ICMP, DHCP, DNS, and mDNS support
    • HTTP server with built-in programmable HTML page for over-the-network device configuration
    • Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 personal and enterprise security
    • SimpleLink™ connection manager for managing Wi-Fi security states
    • TX power:
      • 17.0 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX sensitivity:
      • –94.7 dBm at 1 DSSS
      • –87.0 dBm at 11 CCK
      • –73.0 dBm at 54 OFDM
    • Application Throughput:
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-management subsystem:
    • Integrated DC/DC converter with a wide-supply voltage:
      • VBAT: 2.3 to 3.6 V
    • Low-power consumption At 3.6 V:
      • Hibernate with Real-Time Clock (RTC): 7 µA
      • Low-Power Deep Sleep: <275 µA
      • RX Traffic: 59 mA at 54 OFDM
      • TX Traffic: 229 mA at 54 OFDM
    • Package and operating conditions:
      • 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
      • Operating temperature range: –20°C to +70°C
  • Additional integrated components:
    • 40.0-MHz crystal
    • 32.768-kHz crystal (RTC)
    • 8-Mbit SPI Serial Flash
    • RF filter and passive components
  • QFM package:
    • 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
  • Operating temperature:
    • Ambient temperature range: –40°C to +85°C
  • Module supports SimpleLink Developer’s Ecosystem
  • CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
  • Fully integrated module includes all required clocks, SPI Flash, and passives
  • Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
  • Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
  • 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
  • Applications MCU subsystem:
    • Arm® Cortex®-M4 core at 80 MHz
    • Embedded memory:
      • Integrated serial Flash
      • RAM (up to 256KB)
      • Peripheral drivers in ROM
    • Hardware crypto engine for advanced hardware security including:
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit parallel camera
    • One Multichannel Audio Serial Port (McASP) interface with support for I2S format
    • One SD (MMC) interface
    • 32-channel Micro Direct Memory Access (µDMA)
    • Two Universal Asynchronous Receivers and Transmitters (UARTs)
    • Two Serial Peripheral Interfaces (SPIs)
    • One Inter-integrated Circuit (I2C)
    • Four General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) mode
    • One Watchdog Timer Module
    • 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 25 individually programmable GPIO pins
  • Wi-Fi network processor subsystem:
    • 802.11 b/g/n radio, baseband, and medium access control
    • TCP/IP Stack
      • Eight simultaneous TCP, UDP, or RAW sockets
      • Two simultaneous TLS v1.2 or SSL 3.0 sockets
    • ARP, ICMP, DHCP, DNS, and mDNS support
    • HTTP server with built-in programmable HTML page for over-the-network device configuration
    • Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 personal and enterprise security
    • SimpleLink™ connection manager for managing Wi-Fi security states
    • TX power:
      • 17.0 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX sensitivity:
      • –94.7 dBm at 1 DSSS
      • –87.0 dBm at 11 CCK
      • –73.0 dBm at 54 OFDM
    • Application Throughput:
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-management subsystem:
    • Integrated DC/DC converter with a wide-supply voltage:
      • VBAT: 2.3 to 3.6 V
    • Low-power consumption At 3.6 V:
      • Hibernate with Real-Time Clock (RTC): 7 µA
      • Low-Power Deep Sleep: <275 µA
      • RX Traffic: 59 mA at 54 OFDM
      • TX Traffic: 229 mA at 54 OFDM
    • Package and operating conditions:
      • 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
      • Operating temperature range: –20°C to +70°C
  • Additional integrated components:
    • 40.0-MHz crystal
    • 32.768-kHz crystal (RTC)
    • 8-Mbit SPI Serial Flash
    • RF filter and passive components
  • QFM package:
    • 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
  • Operating temperature:
    • Ambient temperature range: –40°C to +85°C
  • Module supports SimpleLink Developer’s Ecosystem

Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.

The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.

Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.

The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
CC3220MOD 現行 SimpleLink™ 32 位元 Arm Cortex-M4 Wi-Fi CERTIFIED™ 無線模組 This module supports the 2.4GHz band with additional security features and lower power.
功能與所比較的裝置相似
CC3235MODSF 現行 具有 1 MB 快閃記憶體的 SimpleLink™ 32 位元 ARM Cortex-M4 雙頻 Wi-Fi CERTIFIED™ 無線模組 This module supports dual-band 2.4 GHz and 5 GHz Wi-Fi with enhanced security features & 1MB XIP Flash.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 31
重要文件 類型 標題 格式選項 日期
* Data sheet CC3200MOD SimpleLink™ Certified Microcontroller and Wi-Fi® Network Processor Mod datasheet (Rev. C) 2020年 9月 22日
* User guide CC3200 SimpleLink Wi-Fi Wireless MCU Technical Reference Manual (Rev. D) 2018年 5月 9日
* Radiation & reliability report CC3200MOD Reliability Data - Reliability Estimate 2017年 7月 27日
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) PDF | HTML 2022年 10月 20日
Cybersecurity advisory TI-PSIRT-2021-100117 Integrated HTTP Server Ping Utility Vulnerability PDF | HTML 2022年 1月 15日
Certificate CC3200MODR1M2AMOB EC Declaration of Conformity (DoC) (Rev. A) 2021年 3月 3日
User guide CC3100/CC3200 SimpleLink Wi-Fi Internet-on-a-Chip User's Guide (Rev. C) PDF | HTML 2020年 12月 16日
Application note SimpleLink™ Wi-Fi® Enabled Electronic Smart Lock (Rev. A) 2020年 9月 29日
Application note CE Compliance Test Procedure for TI’s WiFi Devices PDF | HTML 2020年 8月 19日
Certificate Product Information for CC3xxx Devices as Per Annex-E of EN 300 328 2020年 8月 10日
Application note CC3x00 Power Management Optimization and Measures (Rev. A) PDF | HTML 2020年 6月 2日
Application note Transfer of TI Wi-Fi® Alliance Certifications to Products Using WFA Cert Policy (Rev. F) PDF | HTML 2020年 1月 30日
User guide SimpleLink™ Wi-Fi® CC3100, CC3200 UniFlash User's Guide PDF | HTML 2020年 1月 15日
Application note CC3x00 Production Line Guide 2019年 10月 22日
White paper Low-Power Internet Connectivity Over Wi-Fi (Rev. A) 2019年 5月 23日
White paper A primer to Wi-Fi® provisioning for IoT applications (Rev. A) 2019年 1月 31日
User guide CC3200MOD SimpleLink Wi-Fi and IoT Solution With MCU-Module LaunchPad User Guide (Rev. A) 2018年 8月 27日
Product overview IP smart door locks: Power optimized and added security features for cloud conne (Rev. B) 2018年 6月 26日
User guide CC3200 SimpleLink Wi-Fi and IoT Solution w/ MCU LaunchPad Getting Started Guide (Rev. E) 2018年 5月 9日
Product overview Design a low power camera with optimized cloud streaming and enhanced security u (Rev. A) 2018年 4月 24日
Product overview Design a video doorbell with optimized cloud streaming and enhanced security fea (Rev. A) 2018年 4月 24日
White paper Wireless Connectivity For The Internet of Things, One Size Does Not Fit All (Rev. A) 2017年 10月 16日
More literature Streamline the challenges of RF design with certified wireless modules 2017年 1月 25日
Technical article Part 1: Bringing the internet to a single chip PDF | HTML 2016年 11月 18日
More literature TI SimpleLink™ Wi-Fi® Family - Internet-on-a-chip solutions (Rev. C) 2016年 9月 7日
User guide TI-RTOS 2.16 for CC32xx SimpleLink Wireless MCUs Getting Started Guide (Rev. F) 2016年 2月 22日
Technical article Understanding wireless connectivity in industrial IoT applications PDF | HTML 2015年 8月 4日
E-book Understanding Wireless Connectivity in the Industrial IoT 2015年 7月 22日
User guide Antenna Board User's Guide 2014年 8月 7日
White paper A link to the Internet of Things IoT Made Easy With SimpleLink Wi-Fi Solutions 2014年 7月 31日
Application note CC31xx/CC32xx SimpleLink™ Wi-Fi® and IoT Power Management App Report 2014年 7月 28日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

CC3200AUDBOOST — SimpleLink Wi-Fi CC3200 音訊 BoosterPack

The SimpleLink™ Wi-Fi® CC3200 Audio BoosterPack enables the evaluation and development with the digital audio peripheral [I2S] present on the SimpleLink™ Wi-Fi® CC3200 device. It contains a Class-D power amplifier to drive speakers and an ultra-low power audio codec, TLV320AIC3254, supporting (...)

使用指南: PDF
TI.com 無法提供
偵錯探測器

LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件,可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案,適用於從早期的矽前 (pre-silicon) 開發,到產品認證和現場故障排除等所有開發階段:   完整的晶片內建斷點支援;執行階段記憶體存取;快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼,使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能,以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式,鑒定 (...)

軟體開發套件 (SDK)

CC3200SDK CC3200 Software Development Kit (SDK), Service Pack, and Add-Ons

The SimpleLink™ Wi-Fi® CC3200 SDK contains drivers for the CC3200 programmable MCU, 40+ sample applications, and documentation needed to use the solution. It also contains the flash programmer, a command line tool for flashing software, configuring network and software parameters (SSID, (...)

支援產品和硬體

支援產品和硬體

下載選項
IDE、配置、編譯器或偵錯程式

CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 無線電測試工具

SimpleLink™ Wi-Fi® 無線電測試工具是 Windows 軟體工具,適用於在開發和認證過程中對 SimpleLink Wi-Fi CC31xx 和 CC32xx 設計進行 RF 評估和測試。  可透過手動方式利用此工具將無線電設定為傳輸或接收模式,以啓用低階無線電測試功能。使用此工具需要熟悉並了解無線電電路理論,以及無線電測試方法。

SimpleLink Wi-Fi CC31xx 和 CC32xx 裝置專爲物聯網 (IoT) 而建立,包括晶片內建 Wi-Fi、網際網路和穩健執行的安全協定,無需先前的 Wi-Fi 經驗即可加快開發速度。  如需有關 CC31xx 和 CC32xx (...)

IDE、配置、編譯器或偵錯程式

CCSTUDIO Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

支援產品和硬體

支援產品和硬體

啟動 下載選項
IDE、配置、編譯器或偵錯程式

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

支援產品和硬體

支援產品和硬體

啟動 下載選項
線上培訓

SIMPLELINK-ACADEMY-CC32XX SimpleLink™ Academy for CC32xx

SimpleLink Academy delivers easy-to-use training modules that span a wide range of topics for the SimpleLink Wi-Fi® evaluation platforms and software.
支援產品和硬體

支援產品和硬體

軟體程式設計工具

EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 嵌入式編程

每個板載嵌入式 CC3120/CC3220 裝置的產品,都必須連接一個序列快閃記憶體裝置。序列快閃記憶體必須進行格式化,並且至少需要編程為有必要軟體更新和額外功能的 Service Pack。以 CC3220 為例,在內部 MCU 處理器上執行的二進位映像也必須編程。序列快閃記憶體編程有多種現有選項:
  • Uniflash – 基於 PC 的公用程式,提供映像建立和編程。內容透過 UART 編程。
  • 無線傳輸編程 – 內容透過網路連接傳送。然而,這需要在生產過程中提前對序列快閃記憶體進行格式化。內容可透過主機介面(UART 或 SPI)編程。
  • 工業快閃記憶體編程 – 使用 Uniflash (...)
使用指南: PDF | HTML
軟體程式設計工具

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

支援產品和硬體

支援產品和硬體

啟動 下載選項
認證

CC3100MOD-DESIGN-FILES CC3100MOD Design Information for Regulatory Compliance

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

支援產品和硬體

支援產品和硬體

認證

CC3220MODA-DESIGN-FILES CC3220MODA Design Information for Regulatory Compliance

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

支援產品和硬體

支援產品和硬體

認證

SIMPLELINK-CC32XX-REPORTS Reports: CC32xx Regulatory Certification

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

支援產品和硬體

支援產品和硬體

認證

SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX 的無線電認證

您是否正在尋找 CC3XXX 認證支援?SIMPLELINK-CC3XXX-CERTIFCATION 提供相關資訊與支援,可協助 CC31XX、CC32XX 及 CC33XX 產品順利通過認證。在此頁面中,您將找到我們模組的最新認證報告以及我們為採用精簡晶片解決方案進行設計的客戶提供的評估板。
設計工具

SIMPLELINK-WIFI-DESIGN-REVIEWS — 適用於 SimpleLink™ Wi-Fi 裝置的硬體設計審查

CC3XXX Wi-Fi 硬體設計審查流程提供一對一接觸的方式,並由主題內容專家協助審查您的設計,為您提供寶貴的意見。  在要求審查之前,請務必檢閱技術文件及相應產品頁上提供的設計與開發資源。產品頁資源可能不再需要進行設計審查。

一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 Wi-Fi 硬體設計審查。

對於以 CC33xx 和 CC35xx 為架構的設計,請將設計檔案申請直接以電子郵件傳送至 connectivity-wifi-hw-reviews@list.ti.com。您可以從這些裝置的相關產品頁請求存取這些裝置的設計文件。

對於其他所有 CC3xxx (...)

使用指南: PDF
設計工具

SWRR177 CC3x00 Design Checklist

The CC3XXX Wi-Fi hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback.  Before requesting a review, it is important to review the technical documentation and design & (...)

支援產品和硬體

支援產品和硬體

參考設計

TIDA-00485 — 具有 24 VAC 電源的非隔離式 RS-485 轉 Wi-Fi 橋接器參考設計

TIDA-00485 uses our SimpleLink Wi-Fi CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi® network. The SN65HVD72 transceiver provides the RS-485 interface with 12 kV of ESD protection and additional protection is provided on board. (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00486 — 具有 24 VAC 電源的隔離式 RS-485 轉 Wi-Fi 橋接器參考設計

TIDA-00486 uses our SimpleLink Wi-Fi® CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 Fly-Buck™ power supply (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00375 — 具有 24 VAC 電源的 UART 轉 Wi-Fi 橋接器參考設計

This reference design uses our SimpleLink Wi-Fi CC3200 internet-on-a-chip wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a simple switcher power supply with a wide-input range suitable (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDC-CC3200-VIDEO — 透過 Wi-Fi 進行視訊/音訊串流的 SimpleLink™ CC32xx-OV788 參考設計

此設計讓 OV788 超低功耗影片壓縮晶片使用者能夠非常輕鬆地透過 Wi-Fi® 實現音訊與視訊資料的即時串流功能。它展示了在 SimpleLink™ CC3200 Wi-Fi 無線微控制器上透過 802.11 b/g/n 網路從任何智慧型手機、平板電腦或電腦透過區域網路實現 RTP 視訊串流 + Wi-Fi 連接的單晶片實作。此設計實作非常適合各種物聯網 (IoT) 應用,例如電池供電的入侵攝影機、門鎖、視訊門鈴與智慧家庭中的 360 度多攝影機,充分利用 CC3200 Internet-on-a-chip™ 解決方案的簡易 Wi-Fi 網路配置與進階低功耗模式。
Design guide: PDF
電路圖: PDF
參考設計

TIDC-CC3200MODLAUNCHXL — SimpleLink™ Wi-Fi® CC3200 模組 LaunchPad

CC3200MODLAUNCHXL 是裝載 CC3200MOD 的低成本評估平台。SimpleLink™ CC3200MOD 無線微控制器 (MCU) 模組整合以 ARM® Cortex™-M4 為基礎的 MCU,允許客戶使用單一裝置開發整套應用程式。模組 LaunchPad 也具備可編程的使用者按鈕、適用於自訂應用程式的 RGB LED、溫度及加速計感測器,以及可偵錯的板載模擬。LaunchPad 可堆疊接頭介面展示在與現有 BoosterPack 附加電路板上的其他周邊設備介接時,如何擴充 CC3200MOD 的功能性,例如圖形顯示、音訊轉碼器、天線選擇、環境感測及其他更多項目。
使用指南: PDF
電路圖: PDF
參考設計

TIDC-SMARTPLUG-WIFI — 具有遠端中斷連線和 Wi-Fi 連線的智慧型插頭

此設計採用具遠端連線/斷開功能和 Wi-Fi 連線功能的單插座能源測量。設計人員可快速建立適合工業建築與家庭自動化應用的網路負載控制裝置。
Design guide: PDF
電路圖: PDF
參考設計

TIDC-CC3ANTENNA-SELECTION — SimpleLink Wi-Fi 天線選擇

The SimpleLink™ Wi-Fi® Antenna BoosterPack (CC3ANTENNABOOST) enables evaluation and development of end applications requiring antenna diversity. When used with the SimpleLink Wi-Fi CC3200 Launchpad (CC3200-LAUNCHXL) or the CC3100 Boosterpack (CC3100BOOST) rev 3.1 or higher, the user can select the (...)
電路圖: PDF
參考設計

TIDC-CC3200AUDBOOST — 適用於 SimpleLink Wi-Fi CC3200 Launchpad 的 Wi-Fi 音訊串流應用

This SimpleLink Wi-Fi CC3200 LaunchPad and Audio BoosterPack design brings Wi-Fi audio streaming capability to new applications as well as existing ones such as HD digital speakers. It enables the capture, streaming and playback of audio from a digital microphone or a stereo/mono audio jack to (...)
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
QFM (MOB) 63 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片