AM62D-Q1
Processor Cores:
- Up to Quad Arm Cortex-A53 microprocessor subsystem at up to 1.4GHz
- Quad-core Cortex-A53 cluster with 512KB L2 shared cache with SECDED ECC
- Each A53 core has 32KB L1 DCache with SECDED ECC and 32KB L1 ICache with Parity protection
- Single-core Arm Cortex-R5F at up to 800MHz, integrated as part of MCU Channel with FFI
- 32KB ICache, 32KB L1 DCache, and 64KB TCM with SECDED ECC on all memories
- 512KB SRAM with SECDED ECC
- Single-core Arm Cortex-R5F at up to 800MHz, integrated to support Device Management
- 32KB ICache, 32KB L1 DCache, and 64KB TCM with SECDED ECC on all memories
- DSP with Matrix Multiplication Accelerator based on single-core C7x
- C7x floating point, up to 40GFLOPS, 256-bit Vector DSP at 1.0GHz
- Matrix Multiply Accelerator (MMA), up to 2TOPS (8b) at 1.0GHz
- 32KB L1 DCache with SECDED ECC and 64KB L1 ICache with Parity protection
- 1.25MB of L2 SRAM with SECDED ECC
Memory Subsystem:
- Up to 2.29MB of On-chip RAM
- 64KB of On-Chip RAM (OCRAM) with SECDED ECC, can be divided into smaller banks in increments of 32KB for as many as 2 separate memory banks
- 256KB of On-Chip RAM with SECDED ECC in SMS Subsystem
- 176KB of On-Chip RAM with SECDED ECC in SMS Subsystem for TI security firmware
- 512KB of On-chip RAM with SECDED ECC in Cortex-R5F MCU Subsystem
- 64KB of On-chip RAM with SECDED ECC in Device/Power Manager Subsystem
- 1.25MB of L2 SRAM with SECDED ECC in C7xDSP with Matrix Multiplication Accelerator
- DDR Subsystem (DDRSS)
- Supports LPDDR4
- 32-bit data bus with inline ECC
- Supports speeds up to 3733MT/s
- Max addressable range of 8GBytes
Functional Safety:
- Functional Safety-Compliant targeted [Automotive]
- Developed for functional safety applications
- Documentation will be available to aid functional safety system design
- Systematic capability up to ASIL D targeted
- Hardware integrity up to ASIL B targeted
- AEC - Q100 qualified [Automotive]
Security:
- Secure boot supported
- Hardware-enforced Root-of-Trust (RoT)
- Support to switch RoT via backup key
- Support for takeover protection, IP protection, and anti-roll back protection
- Trusted Execution Environment (TEE) supported
- Arm TrustZone based TEE
- Extensive firewall support for isolation
- Secure watchdog/timer/IPC
- Secure storage support
- Replay Protected Memory Block (RPMB) support
- Dedicated Security Controller with user programmable HSM core and dedicated security DMA & IPC subsystem for isolated processing
- Cryptographic acceleration supported
- Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
- Supports cryptographic cores
- AES – 128-/192-/256-Bit key sizes
- SHA2 – 224-/256-/384-/512-Bit key sizes
- DRBG with true random number generator
- PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
- Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
- Debugging security
- Secure software controlled debug access
- Security aware debugging
High-Speed Interfaces:
- Integrated Ethernet switch supporting (total 2 external ports)
- RMII(10/100) or RGMII (10/100/1000)
- IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
- Clause 45 MDIO PHY management
- Packet Classifier based on ALE engine with 512 classifiers
- Priority based flow control
- Time Sensitive Networking (TSN) support
- Four CPU H/W interrupt Pacing
- IP/UDP/TCP checksum offload in hardware
- Two USB2.0 Ports
- Port configurable as USB host, USB peripheral, or USB Dual-Role Device (DRD mode)
- Integrated USB VBUS detection
- One Camera Serial interface (CSI-2) Receiver with 4-Lane D-PHY
- High Speed External Processor Data Receive Interface over CSI-2 and MIPI D-PHY
General Connectivity:
- 9x Universal Asynchronous Receiver-Transmitters (UART)
- 5x Serial Peripheral Interface (SPI) controllers
- 6x Inter-Integrated Circuit (I2C) ports
- 3x Multichannel Audio Serial Ports (McASP)
- Transmit and Receive Clocks up to 50MHz
- Up to 4/6/16 Serial Data Pins across 3x McASP with Independent TX and RX Clocks
- Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and Similar Formats
- Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 Formats)
- FIFO Buffers for Transmit and Receive (256 Bytes)
- Support for audio reference output clock
- 3x enhanced PWM modules (ePWM)
- 3x enhanced Quadrature Encoder Pulse modules (eQEP)
- 3x enhanced Capture modules (eCAP)
- General-Purpose I/O (GPIO), All LVCMOS I/O can be configured as GPIO
- 3x Controller Area Network (CAN) modules with CAN-FD support
- Conforms w/ CAN Protocol 2.0 A, B and ISO 11898-1
- Full CAN-FD support (up to 64-data bytes)
- Parity/ECC check for Message RAM
- Speed up to 8Mbps
Media and Data Storage:
- 3x Multi-Media Card/Secure Digital (MMC/SD/SDIO) interface
- 1x 8-bit eMMC interface up to HS200 speed
- 2x 4-bit SD/SDIO interface up to UHS-I
- Compliant with eMMC 5.1, SD 3.0, and SDIO Version 3.0
- 1× General-Purpose Memory Controller (GPMC) up to 133MHz
- Flexible 8- and 16-bit Asynchronous Memory Interface with up to four Chip (22-bit address) Selects (NAND, NOR, Muxed-NOR, and SRAM)
- Uses BCH code to support 4-, 8-, or 16-bit ECC
- Uses Hamming code to support 1-bit ECC
- Error Locator Module (ELM)
- Used with the GPMC to locate addresses of data errors from syndrome polynomials generated using a BCH algorithm
- Supports 4-, 8-, and 16-bit per 512-Byte block error location based on BCH algorithms
- OSPI/QSPI with DDR / SDR support
- Support for Serial NAND and Serial NOR Flash devices
- 4GBytes memory address support
- XIP mode with optional on-the-fly encryption
Power Management:
- Low-power modes supported by Device/Power Manager
- Partial IO support for CAN/GPIO/UART wakeup
Boot Options:
- UART
- I2C EEPROM
- OSPI/QSPI Flash
- GPMC NOR/NAND Flash
- Serial NAND Flash
- SD Card
- eMMC
- USB (host) Mass Storage device
- USB (slave) boot from external host (DFU mode)
- Ethernet
Technology / Package:
- 16-nm FinFET technology
- 18mm x 18mm, 0.8mm pitch full-array, 484-pin FCCSP (ANF)
The AM62D processor from the Sitara™ MPU family is targeted for applications needing high-performance Digital Signal Processing. Some of these applications include:
- Audio: Automotive premium amplifier and professional audio
- Radar and Radio: Aerospace and Defense
- Sonar: Marine equipments
- Ultrasound: Medical equipments
- Instrumentation: Current, Voltage, other signals: Test and Measurement
Key cores on the device include the Arm® Cortex®-A53 and C7000™ (“C7x”) scalar and vector DSP core from Texas Instruments, a dedicated Matrix Multiplication Accelerator (MMA), along with an isolated MCU island. All protected by industrial and automotive grade safety and security hardware accelerators.
DSP Core Overview: the C7504 core from C7x family provides up to 40GFLOPS of DSP compute. It achieves 4x to 8x or more performance compared to the previous generation C66x DSP core. Some of the key features includes:
- 256-bit fixed- and floating-point DSP vector core
- Single-cycle latency to access L2 memory via Streaming Engine
- Improved control code efficiency
- True 64-bit machine with 64-bit memory addressing and single-cycle 64-bit base arithmetic operations
Integration Overview: along with C7x DSP core, the AM62D SoC integrates up to Quad Arm® Cortex®-A53 providing additional 16.8KDMIPS compute and HLOS flexibility of Linux or Real-Time Operating System (RTOS). Up to two Arm® Cortex®-R5F subsystems enable low-level, timing critical processing tasks to leave the Arm® Cortex®-A53 and DSP core’s unencumbered for applications. Integrated diagnostics and safety features support operations up to SIL-2 and ASIL-B levels while the integrated security features protect data against modern day attacks. The AM62D device also offers a 3-port Gigabit Ethernet switch with Time-Sensitive Networking (TSN) to enable audio networking features such as, Ethernet Audio Video Bridging (eAVB) and Dante, while peripherals like the McASP, enable multi-channel I2S and TDM Audio inputs and outputs.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AUDIO-AM62D-EVM — 可實現優質音訊的 AM62D 可擴充硬體
AUDIO-AM62D-EVM 評估模組 (EVM) 是低成本的可擴充平台,專為開發人員所設計,以針對各種使用案例進行多通道音訊應用的原型設計與評估。AUDIO-AM62D-EVM 的核心是 AM62D 系統單晶片 (SoC),其搭載 C7x DSP 256 位元寬度向量核心,並緊密耦合矩陣乘法加速器 (MMA)、單一週期可存取 1.25MB L2 記憶體、四核心 Arm®-Cortex® A53 微處理器、雙核心 Arm Cortex-R5F MCU 和 LPDDR4 32 位元控制器,且全都受到汽車級安全硬體模組的保護。C7x 和 MMA 一併構成每秒 2 兆次操作 (2 TOPS) 的 (...)
DP83867-EVM-AM — 適用於工業乙太網路 PHY 附加電路板的 AM2x 及 AM6x 評估模組
DP83867-EVM-AM 是一款工業乙太網路 PHY 附加電路板,可搭配 Arm-b高性能微控制器評估模組使用。此附加電路板是使用 EVM 進行初始乙太網路評估與原型設計的絕佳選擇。DP83867-EVM-AM 配備了有 RGMII 介面的 TI DP83867IR 低延遲 10/100/1000-Mbps PHY,以及標準 RJ45 乙太網路連網連接器。具有乙太網路擴充連接器的 EVM (如 AUDIO-AM275-EVM) 支援 DP83867-EVM-AM。
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
產品
Arm Cortex-M0+ MCU
MSP430 微控制器
Arm Cortex-R MCU
Arm 式處理器
C2000 即時微控制器
數位訊號處理器 (DSP)
Sub-1 GHz 無線 MCU
低耗電 2.4-GHz 產品
汽車無線連線產品
汽車 mmWave 雷達感測器
工業 mmWave 雷達感測器
硬體開發
子卡
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
支援產品和硬體
此設計資源支援此類別中多數產品。
檢查產品詳細資料頁面以確認支援。
-
parametric-filter 數位訊號處理器 (DSP) -
parametric-filter Arm 式處理器 -
parametric-filter MSP430 微控制器 -
parametric-filter C2000 即時微控制器 -
parametric-filter Arm 式微控制器 -
parametric-filter 訊號調節器 -
parametric-filter mmWave 雷達感測器 -
parametric-filter Wi-Fi 產品 -
parametric-filter Sub-1 GHz 產品 -
parametric-filter 數位電源隔離式控制器
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
支援產品和硬體
產品
汽車 mmWave 雷達感測器
數位訊號處理器 (DSP)
C2000 即時微控制器
Wi-Fi 產品
Arm 式處理器
工業 mmWave 雷達感測器
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
Sub-1 GHz 無線 MCU
汽車無線連線產品
低耗電 2.4-GHz 產品
AM62D-PET-CALC — AM62D Power Estimation Tool
支援產品和硬體
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
FCCSP (ANF) | 484 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。