The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F261x and MSP430F241x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit ADC, a comparator, two 12-bit DACs, four USCI modules, DMA, and up to 64 I/O pins. The MSP430F241x devices are identical to the MSP430F261x devices, with the exception that the DAC12 and the DMA modules are not implemented.
The LQFP-64 package is also available as a nonmagnetic package for medical imaging applications.
For complete module descriptions, see the MSP430F2xx and MSP430G2xx Family User’s Guide .
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV8106H-Q1EVM 設計旨在評估 DRV8106H-Q1，是一款符合車用資格的整合式有刷 DC 馬達驅動器。DRV8106H-Q1 是一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。廣泛共模分流放大器提供內嵌電流感測以持續測量馬達電流。
(...)
DRV8106S-Q1EVM 設計旨在評估 DRV8106S-Q1，是一款符合車用資格的整合式有刷 DC 馬達驅動器。DRV8106S-Q1 是一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。
廣泛共模分流放大器提供內嵌電流感測以持續測量馬達電流。
(...)
The DRV8256E evaluation mode (EVM) allows easy evaluation of the DRV8256E device.
The DRV8932E integrates two N-channel power MOSFET H-bridges and integrated current sense and regulation circuirty. The DRV8256E device operates off a single power supply and support a wide input supply range from 4.5 (...)
The DRV8256P evaluation module (EVM) allows easy evaluation of the DRV8256P device.
The DRV8932P integrates two N-channel power MOSFET H-bridges and integrated current sense and regulation circuirty. The DRV8256P device operates off a single power supply and support a wide input supply range from (...)
The DRV8424E evaluation module (EVM) allows easy evaluation of the DRV8424E device.
The DRV8424E devices are integrated motor-driver solutions for bipolar stepper motors or brushed DC motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation (...)
The DRV8424 evaluation module (EVM) allows easy evaluation of the DRV8424 device.
The DRV8424 devices are integrated motor-driver solutions for bipolar stepper motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation circuitry, and a microstepping (...)
The DRV8424P evaluation module (EVM) allows easy evaluation of the DRV8424P device.
The DRV8424P devices are integrated motor-driver solutions for bipolar stepper motors or brushed DC motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation (...)
The DRV8426E evaluation module (EVM) allows easy evaluation of the DRV8426E device.
The DRV8426E devices are integrated motor-driver solutions for bipolar stepper motors or brushed DC motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation (...)
The DRV8426 evaluation module (EVM) allows easy evaluation of the DRV8426 device.
The DRV8426 devices are integrated motor-driver solutions for bipolar stepper motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation circuitry, and a microstepping (...)
The DRV8426P evaluation module (EVM) allows easy evaluation of the DRV8426P device.
The DRV8426P devices are integrated motor-driver solutions for bipolar stepper motors or brushed DC motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation (...)
DRV8428E 評估模組 (EVM) 可輕鬆評估 DRV8428E 裝置。
DRV8428E 裝置是雙極步進馬達或有刷 DC 馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道功率 MOSFET 全橋、整合式電流感測與穩壓電路。DRV8428E 裝置可透過 4.5 至 33 V 供應電壓供電。透過簡單的 PHASE/EN 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV8428EEVM 使用指南。
DRV8428 評估模組 (EVM) 可輕鬆評估 DRV8428 裝置。
DRV8428 裝置是雙極步進馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道電源 MOSFET 全橋、積體電路感測與調節電路，以及微型步進索引器。DRV8428 裝置可透過 4.5 至 33 V 供應電壓供電。透過簡單的 STEP/DIR 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為緩慢、混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV8428EVM 使用指南。
DRV8428P 評估模組 (EVM) 可輕鬆評估 DRV8428P 裝置。
DRV8428P 裝置是雙極步進馬達或有刷 DC 馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道功率 MOSFET 全橋、整合式電流感測與穩壓電路。DRV8428P 裝置可透過 4.5 至 33 V 供應電壓供電。透過簡單的 PWM 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV8428PEVM 使用指南。
The DRV8434A evaluation module (EVM) allows easy evaluation of the DRV8434A device.
The DRV8434A devices are integrated motor-driver solutions for bipolar stepper motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation circuitry, analog stall (...)
DRV8434E 評估模組 (EVM) 可輕鬆評估 DRV8434E 裝置。
DRV8434E 裝置是雙極步進馬達或有刷 DC 馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道功率 MOSFET 全橋、整合式電流感測與穩壓電路。DRV8434E 裝置可透過 4.5 至 48 V 供應電壓供電。透過簡單的 PHASE/EN 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為緩慢、混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV84xxEVM 使用指南。
DRV8434 評估模組 (EVM) 可輕鬆評估 DRV8434 裝置。
DRV8434 裝置是雙極步進馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道電源 MOSFET 全橋、積體電路感測與調節電路，以及微型步進索引器。DRV8434 裝置可透過 4.5 至 48 V 供應電壓供電。透過簡單的 STEP/DIR 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為緩慢、混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV84xxEVM 使用指南。
DRV8434P 評估模組 (EVM) 可輕鬆評估 DRV8434P 裝置。
DRV8434P 裝置是雙極步進馬達或有刷 DC 馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道功率 MOSFET 全橋、整合式電流感測與穩壓電路。DRV8434P 裝置可透過 4.5 至 48 V 供應電壓供電。透過簡單的 PWM 控制介面，讓外部控制器可管理輸出。衰退模式可選擇為緩慢、混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV84xxEVM 使用指南。
The DRV8434S evaluation module (EVM) allows easy evaluation of the DRV8434S device.
The DRV8434S is a fully integrated stepper motor driver, supporting up to 2.5 A full scale current with an internal microstepping indexer, smart tune decay technology, advanced stall detection algorithm, and (...)
DRV8436E 評估模組 (EVM) 可輕鬆評估 DRV8436E 裝置。
DRV8436E 是雙極步進馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道電源 MOSFET 全橋、積體電路感測與調節電路，以及微型步進索引器。DRV8436E 可由 4.5 V 至 48 V 供應電壓供電。外部控制器可透過簡單的 PH/EN 控制介面，管理步進馬達的方向和步進速率。您可為衰減模式選擇慢速、快速、混合衰減或智慧調諧動態衰減電流調節機制。
如需此評估模組的詳細資訊，請參閱 DRV8436E 產品規格表。
DRV8436 評估模組 (EVM) 可輕鬆評估 DRV8436 裝置。
DRV8436 裝置是雙極步進馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道電源 MOSFET 全橋、積體電路感測與調節電路，以及微型步進索引器。DRV8436 裝置可由 4.5 V 至 48 V 供應電壓供電。外部控制器可透過簡單的 STEP/DIR 介面管理步進馬達的方向和步進速率。衰退模式可選擇成為緩慢混合、混合衰退、智慧調諧漣波控制或智慧調諧動態衰退電流穩壓機制。
如需有關此評估模組的詳細資訊，請參閱 DRV8436EVM 使用指南。
DRV8436P 評估模組 (EVM) 可輕鬆評估 DRV8436P 裝置。
DRV8436P 是適用雙極步進馬達的整合式馬達驅動器解決方案。此裝置整合兩個 N 通道電源 MOSFET 全橋、積體電路感測與調節電路，以及微型步進索引器。DRV8436P 可由 4.5 V 至 48 V 供應電壓供電。外部控制器可透過簡單的 PWM 控制介面，管理步進馬達的方向和步進速率。您可為衰減模式選擇慢速、快速、混合衰減或智慧調諧動態衰減電流調節機制。
如需此評估模組的詳細資訊，請參閱 DRV8436P 產品規格表。
DRV8705H-Q1EVM 設計旨在評估 DRV8705H-Q1，是一款符合車用資格的整合式有刷 DC 馬達驅動器。DRV8705H-Q1 是一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。分流放大器可提供低壓側電流感測以持續測量馬達電流。
(...)
DRV8705S-Q1EVM 設計旨在評估 DRV8705H-Q1，是一款符合車用資格的整合式有刷 DC 馬達驅動器。DRV8705S-Q1 是一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。
分流放大器可提供低壓側電流感測以持續測量馬達電流。
(...)
DRV8706H-Q1EVM 旨在評估 DRV8706H-Q1 這款整合式、符合車用條件的有刷 DC 馬達驅動器。DRV8706H-Q1 為一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。
廣泛共模分流放大器提供內嵌電流感測以持續測量馬達電流。
(...)
DRV8706S-Q1EVM 設計旨在評估 DRV8706S-Q1，是一款符合車用資格的整合式有刷 DC 馬達驅動器。DRV8706S-Q1 是一款高度整合的全橋閘極驅動器，可驅動高壓側和低壓側 N 通道電源 MOSFET。其在高壓側使用整合式倍頻充電泵，並在低壓側採用線性穩壓器，以產生適當閘極驅動電壓。
此裝置採用智慧閘極驅動器架構，可降低系統成本並提升可靠性。閘極驅動器將失效時間最佳化以避免擊穿情況，其透過可調式閘極驅動電流提供控制以減少電磁干擾 (EMI)，並利用 VDS 和 VGS 監控器防止汲極至來源和閘極短路狀況。
(...)
The DRV8711 is a stepper motor controller using external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, supporting up to 1/256 microstep. The DRV8711 is capable of providing ultra-smooth motion profile, and motor stall can be (...)
DRV8714H-Q1 評估模組 (EVM) 具備內嵌電流感測功能，可輕鬆評估 DRV8714H-Q1 四通道閘極驅動器。此 EVM 的精選裝置是具備簡式硬體介面的 40 針腳 6-mm x 6-mm RHA 封裝版本。可接受從 4.9 V 至 40-V DC 的廣泛電源輸入範圍。
DRV8714H-Q1 智慧閘極驅動架構可將失效時間最佳化，以防止擊穿情況，並控制轉換速率。四個 PWM 輸入用於設定被指派輸出的 PWM 頻率和工作週期。如果不需要 PWM，則支援開啓和關閉控制。電流感測放大器可用於低壓側或高壓側感測配置。
DRV8714S-Q1 評估模組 (EVM) 具備內嵌電流感測和離線診斷功能，可輕鬆評估 DRV8714S-Q1 四通道閘極驅動器。此 EVM 上的裝置是具有 SPI 介面的 56 針腳 8-mm x 8-mm RVJ 封裝版本，可接受 4.9 V 至 40-V DC 的廣泛電源輸入範圍。
DRV8714S-Q1 智慧閘極驅動架構可將失效時間最佳化，以防止擊穿情況，並控制轉換速率。四個 PWM 輸入用於設定被指派輸出的 PWM 頻率和工作週期。如果不需要 PWM，則支援開啓和關閉控制。電流感測放大器可用於低壓側或高壓側感測配置。
The DRV8718S-Q1 evaluation module (EVM) allows easy evaluation of the DRV8718S-Q1 device.
The DRV8718S-Q1 is 8-channel Gate Driver with inline current sensing and offline diagnostics. The DRV8718S-Q1 devices can be powered with a supply voltage from 4.9 to 37 V. A smart gate drive architecture (...)
The DRV8805 evaluation module consists of a quad low-side motor driver with built-in indexer control interface that can be used to drive a unipolar stepper motor in full-step, half-step or wave mode. With the DRV8805EVM, designers can quickly and easily evaluate the performance of DRV8805 motor (...)
The DRV8834 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8834 motor driver from Texas Instruments. This EVM comes with an on-board MSP430 microcontroller which has been pre-programmed with a set of useful algorithms for driving a stepper or two brushed DC motors. (...)
This dual H-bridge driver with integrated FETs, DRV8880 can drive stepper motor drivers up to 1/16 microstepping with an on-chip indexer. Aimed at 24V motors, this device features AutoTune(TM) adaptive decay mode, which automatically adjusts the decay settings during operation to achieve the (...)
DRV8881E is a dual H-bridge motor driver that can drive either a stepper motor or dual brushed DC motor driver with a Phase/Enable control interface. For stepper motors, this device also features TI's AutoTune™ adaptive decay mode. Aimed at 24V motors, this device also features (...)
DRV8881P is a dual H-bridge motor driver that can drive either a stepper motor or dual brushed DC motor with a PWM control interface. Also aimed at 24V motors, this device supports slow, fast and mixed decay settings to tune the motors' performance. The DRV8881PEVM (evaluation module) serves as a (...)
The DRV8885 evaluation module (EVM) demonstrates the integrated current sensing capabilities and performance of the DRV8885 integrated circuit from Texas Instruments. The EVM includes the DRV8885 to control a stepper motor, a MSP430F2617 to control the DRV8885 inputs, and a USB to UART to (...)
The DRV8889-Q1 evaluation module (EVM) allows easy evaluation of the DRV8889-Q1 device. The DRV8889-Q1 device is an integrated, dual H-bridge driver for automotive stepper motor applications.
The evaluation module allows the device to be configured for all of its functional modes including (...)
The DRV8899-Q1 evaluation module (EVM) allows easy evaluation of the DRV8899-Q1 device. The DRV8899-Q1 device is an integrated, dual H-bridge driver for automotive stepper motor applications.
The evaluation module allows the device to be configured for all of its functional modes including (...)
DRV8935 評估模組 (EVM) 可輕鬆評估 DRV8935 裝置。
DRV8935 整合兩個 N 通道功率 MOSFET 全橋及整合式電流感測與穩壓電路。DRV8935 裝置透過單一電源供應器運作，並支援 4.5 至 33V 的廣泛輸入供電範圍。簡易的 PWM 控制介面可讓外部控制器驅動輸出。
The MSP-TS430PM64 is a standalone ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.
Device Support: The MSP-TS430PM64 development board supports MSPF13x, MSP430F14x, MSP430F14x1, MSP430F15x, MSP430F16x, (...)
The MSP-FET is a powerful emulation development tool – often called a debug probe – which allows users to quickly begin development on MSP low-power microcontrollers (MCU).
It supports programming and real-time debugging over both JTAG and SBW interfaces. Furthermore, the MSP-FET also provides a (...)
MSP430-SDK is a collection of resources that help users to write effective code for MSP430 microcontrollers (MCUs). These resources support ALL MSP430 microcontrollers. As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”
This collection of (...)
The TI MSP430™ Digital Signal Processing library is a set of optimized functions to perform common signal processing operations for MSP430 microcontrollers. These functions are used in applications where processing-intensive transforms are done in real-time for minimal energy and with very (...)
The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver (...)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® desktops. It can also (...)
檢查產品詳細資料頁面以確認支援。
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® desktops. It can also (...)
As most developers know, it is difficult to (...)
MSPFlasher is an open-source, shell-based (command line) interface for programming MSP430™ and MSP432™ microcontrollers (MCUs) through JTAG and provides the most common programming functions. MSP Flasher can be used to download binary files directly to memory without the need of an IDE (...)
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
(...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| JRBGA (ZQW) | 113 | Ultra Librarian |
| LQFP (PM) | 64 | Ultra Librarian |
| LQFP (PN) | 80 | Ultra Librarian |
| NFBGA (ZCA) | 113 | Ultra Librarian |
MSP-GANG Installer 1.03.09.00
MSP-GANG Manifest
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
Windows Installer for MSPFlasher
Linux 32-Bit Installer for MSPFlasher
Linux 64-Bit Installer for MSPFlasher
OS X Installer for MSPFlasher
MSPFlasher User's Guide
MSP430GRLIB Package
MSP430GRLIB Image Reformer Utility
MSP430 Graphics Library API Guide
Windows single file (offline) installer for Code Composer Studio Theia.
Linux single file (offline) installer for Code Composer Studio Theia.
MacOS single file (offline) installer for Code Composer Studio Theia .
CCS Theia v1.5.1 is a maintenance release for v1.5.0 and contains several important bug fixes and improved C29 device support.
Notable Bug Fixes
Known Issues
General Information
Compatibility:
Compilers
Device Support
MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 microcontroller portfolio.
Windows Installer for MSP-DSPLib
Linux Installer for MSP-DSPLib
Mac Installer for MSP-DSPLib
MSP430 DSPLib User's Guide
The following changes have been added to MSP Graphics Library:
UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
None
Windows Installer for MSP430-SDK
macOS Installer for MSP430-SDK
Linux Installer MSP430-SDK
檢查產品詳細資料頁面以確認支援。
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.