首頁 微控制器 (MCU) 與處理器 Microcontrollers 通用型 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
通用型 MCU

MSP432E411Y

現行

具有乙太網路、CAN、TFT LCD、1 MB 快閃記憶體和 256 kB RAM 的 SimpleLink™ 32 位元 ARM Cortex-M4F MCU

立即訂購
產品規格表
使用指南
勘誤表

MSP432E411Y

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
NFBGA (ZAD) 212 100 mm² 10 x 10
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

filter 尋找其它 通用型 MCU
下載 觀看有字幕稿的影片 影片
TI 提供有限的設計支援

使用此產品的現有專案具備有限的 TI 設計支援。若有提供，您可在此頁面找到相關資訊、工具和軟體。使用此產品的現有設計具備有限的 TI 設計支援。在TI E2E™ 支援論壇中索取有限的設計支援。

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
重要文件 類型 標題 格式選項 日期
* Data sheet MSP432E411Y SimpleLink™ Ethernet Microcontroller datasheet PDF | HTML 2017年 10月 26日
* Errata MSP432E4 SimpleLink™ Microcontrollers Silicon Errata (Rev. A) PDF | HTML 2025年 6月 27日
* User guide MSP432E4 SimpleLink™ Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 2018年 10月 25日
Cybersecurity advisory Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 2020年 6月 5日
White paper Understanding Security Features for SimpleLink™ MSP432E4 Ethernet MCUs (Rev. A) 2019年 1月 31日
Application note Using SimpleLink™ MSP432E4 microcontrollers over the JTAG interface (Rev. A) 2019年 1月 11日
Third party document uVision Lab for the TI MSP432E4 LaunchPad Board 2017年 12月 28日
Technical article Merging wired and wireless connectivity to build an intelligent gateway to the clo PDF | HTML 2017年 11月 28日
User guide MSP432E4 SimpleLink™ Microcontrollers Bootloader (BSL) User's Guide (Rev. A) 2017年 11月 16日
Application note System Design Guidelines for SimpleLink™ MSP432E4 Microcontrollers 2017年 10月 31日
Application note Using Feature Set of I2C Master on SimpleLink MSP432E4 Microcontrollers 2017年 10月 27日
White paper Building a gateway from the sensors to the cloud 2017年 10月 26日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LAUNCHXL-CC2640R2 — 適用 SimpleLink™ Bluetooth® 低功耗無線 MCU 的 CC2640R2 LaunchPad™ 開發套件

此 LaunchPad™ 使用 CC2640R2F 或 CC2640R2L 裝置，以 Bluetooth® 低耗能 (BLE) 連連接加速開發。相容的 SDK 為支援高速模式的單模 BLE 應用提供完全符合標準的 Bluetooth 5 通訊協定堆疊，以及為長距離模式測試提供 Bluetooth 5 編碼實體層 (PHY) 範例。另外也提供 Bluetooth 4.2 堆疊。

View Options
偵錯探測器

MSP432-DEBUGGERS — 適用於 MSP432 的偵錯器

MSP432 MCUs are designed to work with a variety of debuggers from Texas Instruments and third party vendors.

  • Texas Instruments:
    • XDS100v2:
      • The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest (...)
View Options
開發套件

CC3120BOOST — SimpleLink™ Wi-Fi® CC3120 無線網路處理器 BoosterPack™ 插入式模組

SimpleLink™ Wi-Fi® CC3120 無線網路處理器可提供使用者在任何微控制器 (MCU) 中加入 Wi-Fi 的彈性。CC3120 BoosterPack™ 外掛模組 (CC3120BOOST) 是一款可輕易連接至 TI 的 MCU Launchpad 套件（提供給 MSP-EXP432P401R 的軟體範例）的電路板，因此能快速進行軟體開發。CC3120BOOST 可插入進階模擬 BoosterPack (CC31xxEMUBOOST)，並可連接至模擬 MCU 和 SimpleLink Studio 的 PC。最後，此套件也可透過轉接器電路板連接至 TI 的 (...)

使用指南: PDF
TI.com 無法提供
開發套件

MSP-EXP432E401Y — 適用乙太網路 SimpleLink™ MCU 的 MSP432E401Y LaunchPad™ 開發套件

SimpleLink™ 乙太網路 MSP432E401Y 微控制器 LaunchPad™ 開發套件是適用 SimpleLink™ Arm® Cortex®-M4F 架構乙太網路 MCU 的直覺式評估平台。乙太網路 LaunchPad 開發套件的重點特色為 MSP432E401Y MCU，配備整合式乙太網路 MAC 和 PHY 及多種有線通訊介面，包括 USB-OTG、CAN、Quad-SPI (QSSI)、I2C、SPI、UART 和其他序列通訊協定。MSP432E4 MCU 搭載 120MHz Arm Cortex-M4F CPU、1MB 快閃記憶體、256kB SRAM (...)

使用指南: PDF | HTML
TI.com 無法提供
軟體開發套件 (SDK)

SIMPLELINK-MSP432-SDK — SimpleLink MSP432P4 High-precision ADC MCU Software Development

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體開發套件 (SDK)

SIMPLELINK-MSP432E4-SDK — SimpleLink MSP432E4 Ethernet MCU Software Development Kit

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體開發套件 (SDK)

SIMPLELINK-WIFI-CC3120-SDK-PLUGIN — SIMPLELINK-SDK-WIFI-PLUGIN

重要注意事項：

SimpleLink SDK 會定期更新，若要取得最新版本更新，請按一下上面的「提醒我」。

CC3120 SDK 包含驅動程式、許多用於 Wi-Fi 功能和網際網路的範例應用程式，以及使用 CC3120 Internet-on-a-chip™ 解決方案所需的文件。此 SDK 可與 TI 的 MSP432P401R LaunchPad 或 SimpleLink Studio 配合使用，SimpleLink Studio 是一款允許使用 CC3120 進行 MCU 開發的 PC 工具。您也可將 SDK 當成任何平台的範例程式碼使用。SDK 中的所有範例應用程式均受支援，可在 TI 的 (...)

使用指南: PDF
View Options
IDE、配置、編譯器或偵錯程式

ARM-CGT — Arm® 程式碼產生工具 - 編譯器

TI Arm® 程式碼產生 (編譯器) 工具支援基於 TI Arm 的平台開發應用程式，尤其是採用 TI Arm Cortex-M 和 Cortex-R 系列裝置的平台。

目前的工具 ARM-CGT-CLANG 源自於開源 Clang 編譯器及其支援的 LLVM 基礎架構。舊版專有 (ARM-CGT) 工具處於維護狀態，並將視需要提供錯誤修復。請參閱所使用的軟體開發套件 (SDK) 文件，以確認支援哪些編譯器。一般而言，基於 Clang 的編譯器用於新產品。 

Code Composer Studio™ 是適用於 TI 嵌入式裝置的整合式開發環境 (IDE)。開始開發時，建議先從下載 Code (...)

使用指南: PDF | HTML
View Options
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

MSPKEIL — ARM® Keil® MDK

MDK Microcontroller Development Kit

ARM® Keil® MDK is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications. Keil MDK supports SimpleLink™ MSP432™ microcontrollers, and includes a fully integrated debugger for source and disassembly level (...)

造訪合作夥伴網站
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

ULPADVISOR — ULP (超低功耗) Advisor

ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
檢視選項
線上培訓

SIMPLELINK-ACADEMY-MSP432E4 — SimpleLink™ Academy for MSP432E4

SimpleLink Academy for MSP432E4 delivers easy-to-use training modules that span a wide range of topics for all LaunchPads in the MSP432E family of microcontrollers
支援產品和硬體

支援產品和硬體
瀏覽
外掛程式

SIMPLELINK-SDK-BLUETOOTH-PLUGIN — Bluetooth Plug-in for SimpleLink™ MCU SDK

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
外掛程式

SIMPLELINK-SDK-LVGL-PLUGIN — SimpleLink™ SDK LittlevGL plug-in

The SimpleLink™ SDK LVGL Plugin is a companion software package that enables advanced graphics capabilities on various SimpleLink™ MCU platforms by integrating the free and open-source 3rd party library, LittlevGL, into the SimpleLink SDK ecosystem. The Plug-in provides example hardware abstraction (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
外掛程式

SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in

The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
模擬型號

MSP432E411Y 212-NFBGA (ZAD) BSDL Model

SLAM322.ZIP (6 KB) - BSDL Model
下載
模擬型號

MSP432E411Y 212-NFBGA (ZAD) IBIS Model

SLAM323.ZIP (738 KB) - IBIS Model
下載
CAD/CAE 符號

MSP432E411Y 212-NFBGA (ZAD) CAD File (.bxl) (Rev. A)

SLAR142A.ZIP (53 KB)
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
NFBGA (ZAD) 212 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片