首頁 介面 USB IC USB Type-C 與 USB 電源傳輸 IC
首頁
介面
USB IC
USB Type-C 與 USB 電源傳輸 IC

HD3SS3220

現行

具有 DRP 控制器的 10-Gbps USB 3.1 Type-C 2:1 多工器

立即訂購
產品規格表

HD3SS3220

現行
產品規格表 立即訂購

產品詳細資料

Function Type-C, USB 3.0 Type Passive mux Power role DRP, Sink, Source Alternate mode No External power-path control GPIO, I2C Data role DFP, DRP, UFP USB speed (Mbps) 10000 Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 85
Function Type-C, USB 3.0 Type Passive mux Power role DRP, Sink, Source Alternate mode No External power-path control GPIO, I2C Data role DFP, DRP, UFP USB speed (Mbps) 10000 Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 85
WQFN (RNH) 30 11.25 mm² 4.5 x 2.5
  • USB Type-C Port Controller with Integrated 2:1 SuperSpeed Mux
  • Compatible to USB Type-C™ Specifications
  • Supports USB 3.1 G1 and G2 up to 10 Gbps
  • Supports up to 15 W of Power Delivery with 3-A Current Advertisement and Detection
  • Mode Configuration
    • Host Only – DFP/Source
    • Device Only – UFP/Sink
    • Dual Role Port - DRP
  • Channel Configuration (CC)
    • Attach of USB Port Detection
    • Cable Orientation Detection
    • Role Detection
    • Type-C Current Mode (Default, Mid, High)
  • V(BUS) Detection and VCONN Support for Active Cables
  • Audio and Debug Accessory Support
  • Supports for Try.SRC and Try.SNK DRP Modes
  • Configuration Control through GPIO and I2C
  • Low Active and Standby Current Consumptions
  • Industrial Temperature Range of –40 to 85°C
  • USB Type-C Port Controller with Integrated 2:1 SuperSpeed Mux
  • Compatible to USB Type-C™ Specifications
  • Supports USB 3.1 G1 and G2 up to 10 Gbps
  • Supports up to 15 W of Power Delivery with 3-A Current Advertisement and Detection
  • Mode Configuration
    • Host Only – DFP/Source
    • Device Only – UFP/Sink
    • Dual Role Port - DRP
  • Channel Configuration (CC)
    • Attach of USB Port Detection
    • Cable Orientation Detection
    • Role Detection
    • Type-C Current Mode (Default, Mid, High)
  • V(BUS) Detection and VCONN Support for Active Cables
  • Audio and Debug Accessory Support
  • Supports for Try.SRC and Try.SNK DRP Modes
  • Configuration Control through GPIO and I2C
  • Low Active and Standby Current Consumptions
  • Industrial Temperature Range of –40 to 85°C

HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a Dual Role Port (DRP) making it ideal for any application.

The HD3SS3220, in DRP mode, alternates presenting itself as a DFP or UFP according to the Type-C specifications. The CC logic block monitors the CC1 and CC2 pins for pull-up or pull-down resistances to determine when a USB port has been attached and its port role. Once a USB port has been attached, the CC logic also determines the orientation of the cable and configures the USB SS mux accordingly. Finally, CC logic advertises or detects Type-C current mode – Default, Mid, or High in DFP and UFP modes respectively.

Excellent dynamic characteristics of the integrated mux allow switching with minimum attenuation to the SS signal eye diagram and very little added jitter. The device’s switch paths deploy adaptive common mode voltage tracking resulting identical channel despite different common mode voltage for RX and TX channels.

HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a Dual Role Port (DRP) making it ideal for any application.

The HD3SS3220, in DRP mode, alternates presenting itself as a DFP or UFP according to the Type-C specifications. The CC logic block monitors the CC1 and CC2 pins for pull-up or pull-down resistances to determine when a USB port has been attached and its port role. Once a USB port has been attached, the CC logic also determines the orientation of the cable and configures the USB SS mux accordingly. Finally, CC logic advertises or detects Type-C current mode – Default, Mid, or High in DFP and UFP modes respectively.

Excellent dynamic characteristics of the integrated mux allow switching with minimum attenuation to the SS signal eye diagram and very little added jitter. The device’s switch paths deploy adaptive common mode voltage tracking resulting identical channel despite different common mode voltage for RX and TX channels.
filter 尋找其它 USB Type-C 與 USB 電源傳輸 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet HD3SS3220 USB Type-C DRP Port Controller with SuperSpeed 2:1 MUX datasheet (Rev. D) PDF | HTML 2017年 6月 12日
Application note Passive Mux Selection Based On Bandwidth (Rev. A) PDF | HTML 2024年 7月 31日
Application note ESD and Surge Protection for USB Interfaces (Rev. B) PDF | HTML 2024年 1月 11日
Application note Typical Application Issues for TUSB32x and HD3SS3220 CC Controller Devices 2021年 5月 24日
Application note Schematic Checklist for HD3SS3212 and HD3SS3220 2020年 3月 31日
User guide HD3SS3220 DFP Dongle Evaluation Module (Rev. A) 2018年 11月 21日
Application note High-Speed Layout Guidelines for Signal Conditioners and USB Hubs 2018年 6月 14日
Technical article How to select the right USB Type-C™ signal switches PDF | HTML 2018年 3月 20日
White paper USB Type-C™ represents breakthrough connectivity 2015年 12月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

3220DFP-DGLEVM — 具有 SuperSpeed 2:1 多工器的 HD3SS3220 Type-C 下行埠控制器評估模組

The HD3SS3220 DFP Dongle EVM is designed to evaluate HD3SS3220 devices for DFP implementations.  This EVM can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C connector.
使用指南: PDF
TI.com 無法提供
開發板

3220UFP-DGLEVM — 具有 SuperSpeed 2:1 多工器的 HD3SS3220 Type-C 上行埠控制器評估模組

The HD3SS3220 UFP Dongle EVM is designed to evaluate HD3SS3220 devices for UFP implementations.  This EVM can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.
使用指南: PDF
TI.com 無法提供
模擬型號

HD3SS3220 IBIS MODEL

SLYM092.ZIP (27 KB) - IBIS Model
下載
模擬型號

HD3SS3220 S-Parameter Model

SLLM382.ZIP (66 KB) - S-Parameter Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-010057 — 超音波智慧探測器電源供應參考設計

Significant technological advancements and high degree of integration in Medical imaging, especially hand-held ultrasound smart probes, are pushing engineers to come up with highly-efficient, noise immune power solutions in a small size. This reference design documents end to end power and data (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00891 — 具有 UFP 控制器的 USB Type-C 插頭到 USB Type-A 插座 SuperSpeed 多工器參考設計

The TIDA-00891 is designed to evaluate HD3SS3220 devices for UFP implementations. This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  Reference design files can be provided upon request to aid PCB (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00890 — 具有 DFP 控制器的 USB Type-A 插頭到 USB Type-C 插座 SuperSpeed 多工器參考設計

The TIDA-00890 Dongle is designed to evaluate HD3SS3220 devices for DFP implementations.  This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  The layout files can be used as a guideline to (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RNH) 30 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片