LMR33630

現行

具有超低 EMI 的 SIMPLE SWITCHER® 3.8V 至 36V、3A 同步降壓轉換器

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 36 Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging Control mode current mode Vout (min) (V) 1 Vout (max) (V) 34 Iq (typ) (µA) 24 Duty cycle (max) (%) 98
Rating Catalog Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 36 Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging Control mode current mode Vout (min) (V) 1 Vout (max) (V) 34 Iq (typ) (µA) 24 Duty cycle (max) (%) 98
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 VQFN-HR (RNX) 12 6 mm² 3 x 2
  • Functional Safety-Capable
  • Configured for rugged industrial applications
    • Input voltage range: 3.8 V to 36 V
    • Output voltage range: 1 V to 24 V
    • Output current: 3 A
    • 75-mΩ/50-mΩ RDS-ON power MOSFETs
    • Peak-current-mode control
    • Short minimum on-time of 68 ns
    • Frequency: 400 kHz, 1.4 MHz, 2.1 MHz
    • Junction temperature range –40°C to +125°C
    • Low EMI and low switching noise
    • Integrated compensation network
  • Low EMI and switching noise
    • HotRod™ package
    • Parallel input current paths
  • High power conversion at all loads
    • Peak efficiency > 95%
    • Low operating quiescent current of 25 µA
  • Flexible system interface
    • Power-good flag and precision enable
  • Use TPSM53603 module for faster time to market
  • Create a custom design using the LMR33630 with the WEBENCH Power Designer
  • Functional Safety-Capable
  • Configured for rugged industrial applications
    • Input voltage range: 3.8 V to 36 V
    • Output voltage range: 1 V to 24 V
    • Output current: 3 A
    • 75-mΩ/50-mΩ RDS-ON power MOSFETs
    • Peak-current-mode control
    • Short minimum on-time of 68 ns
    • Frequency: 400 kHz, 1.4 MHz, 2.1 MHz
    • Junction temperature range –40°C to +125°C
    • Low EMI and low switching noise
    • Integrated compensation network
  • Low EMI and switching noise
    • HotRod™ package
    • Parallel input current paths
  • High power conversion at all loads
    • Peak efficiency > 95%
    • Low operating quiescent current of 25 µA
  • Flexible system interface
    • Power-good flag and precision enable
  • Use TPSM53603 module for faster time to market
  • Create a custom design using the LMR33630 with the WEBENCH Power Designer

The LMR33630 SIMPLE SWITCHER regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged industrial applications. The LMR33630 drives up to 3 A of load current from an input of up to 36 V. The LMR33630 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. The LMR33630 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33630 is available in an 8-pin HSOIC package and in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks. This device is also available in an AEC-Q100-qualified version.

The LMR33630 SIMPLE SWITCHER regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged industrial applications. The LMR33630 drives up to 3 A of load current from an input of up to 36 V. The LMR33630 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. The LMR33630 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33630 is available in an 8-pin HSOIC package and in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks. This device is also available in an AEC-Q100-qualified version.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
LMR51430 現行 具 40-µA IQ 的 SIMPLE SWITCHER® 4.5-V 至 36-V、3-A 同步降壓轉換器 SOT23-6 package, smaller size for personal electronics and industrial applications
TLVM13630 現行 高密度、3-V 至 36-V 輸入、1-V 至 6-V 輸出、3-A 降壓電源模組 Save board space, simplify design, and speed up time to market with an integrated-inductor power module.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 16
類型 標題 日期
* Data sheet LMR33630SIMPLE SWITCHER® 3.8-V to 36-V, 3-A Synchronous Step-down Voltage Converter datasheet (Rev. F) PDF | HTML 2020年 11月 24日
Functional safety information LMR336x0 Functional Safety, FIT Rate, FMD and Pin FMA (Rev. B) PDF | HTML 2024年 3月 20日
Application note Working with Inverting Buck-Boost Converters (Rev. B) PDF | HTML 2022年 10月 18日
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 2021年 7月 26日
Application note Designing a Motorized Resistive Load PDF | HTML 2021年 7月 21日
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
Technical article 3 tips when designing a power stage for servo and AC drives PDF | HTML 2019年 11月 20日
Application note Achieving CISPR-22 EMI Standards With HotRod™ Buck Designs (Rev. A) 2019年 9月 17日
Technical article Design a pre-tracking regulator, part 2: for a negative LDO PDF | HTML 2019年 4月 26日
Application note Understanding Mode Transitions for LMR33620/30 and LMR36006/15 2019年 4月 4日
Technical article Designing a pre-tracking regulator, part 1: for a positive-output LDO PDF | HTML 2019年 2月 18日
Technical article How a DC/DC converter package and pinout design can enhance automotive EMI perform PDF | HTML 2018年 9月 4日
Technical article A review of EMI standards, part 2 – radiated emissions PDF | HTML 2018年 7月 5日
EVM User's guide LMR33630EVM User's Guide (Rev. A) 2018年 3月 1日
EVM User's guide LMR33630xRNXEVM User's Guide 2018年 2月 22日
Technical article How to increase system reliability and simplify design using DC/DC converters PDF | HTML 2016年 6月 13日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMR33630ADDAEVM — LMR33630 同步降壓轉換器評估模組

The LMR33630ADDAEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630 synchronous step-down converter.  The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
使用指南: PDF
TI.com 無法提供
開發板

LMR33630ARNXEVM — LMR33630 同步降壓轉換器評估模組

The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630A 400kHz synchronous step-down converter.  The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
使用指南: PDF
TI.com 無法提供
開發板

LMR33630CDDAEVM — LMR33630 同步降壓轉換器評估模組

The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630 synchronous step-down converter.  The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
使用指南: PDF
TI.com 無法提供
開發板

LMR33630CRNXEVM — LMR33630 同步降壓轉換器評估模組

The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630C 2.1MHz synchronous step-down converter.  The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
使用指南: PDF
TI.com 無法提供
模擬型號

LMR33630B Inverting and Non-Inverting PSpice Transient Model

SNVMBH2.ZIP (127 KB) - PSpice Model
計算工具

SNVC234 Mode Transitions Calculator LMR336x0 LMR360xx

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LMR33620 具超低 EMI 的 SIMPLE SWITCHER® 3.8V 至 36V、2A 同步降壓轉換器 LMR33620-Q1 3.8-V 至 36-V、2-A 同步降壓轉換器 LMR33630 具有超低 EMI 的 SIMPLE SWITCHER® 3.8V 至 36V、3A 同步降壓轉換器 LMR33630-Q1 3.8V 至 36V、3A 同步降壓轉換器 LMR36006 4.2V 至 60V、0.6A、超小型同步降壓轉換器 LMR36006-Q1 4.2V 至 60V、0.6A、超小型同步降壓轉換器 LMR36015 4.2V 至 60V、1.5A、超小型同步降壓轉換器 LMR36015-Q1 4.2V 至 60V、1.5A、超小型同步降壓轉換器
計算工具

SNVR484 LMR336x0 Component Calculator

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LMR33620 具超低 EMI 的 SIMPLE SWITCHER® 3.8V 至 36V、2A 同步降壓轉換器 LMR33620-Q1 3.8-V 至 36-V、2-A 同步降壓轉換器 LMR33630 具有超低 EMI 的 SIMPLE SWITCHER® 3.8V 至 36V、3A 同步降壓轉換器 LMR33630-Q1 3.8V 至 36V、3A 同步降壓轉換器 LMR33640 採用 SOIC-8 封裝的 SIMPLE SWITCHER® 3.8V 至 36V、4A 降壓轉換器 LMR36015 4.2V 至 60V、1.5A、超小型同步降壓轉換器 LMR36015-Q1 4.2V 至 60V、1.5A、超小型同步降壓轉換器
參考設計

TIDA-010072 — 適合呼吸應用的鼓風機與閥門控制參考設計

This reference design provides a compact system design capable of supporting motor acceleration and deceleration up to ±200 kRPM/s, which is a key requirement in many respirator applications. The design supports a number of offboard C2000 controllers including (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010055 — 非隔離電源架構,具有用於保護繼電器模組的診斷參考設計

This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010009 — 適用於伺服驅動器的小巧高效 24-V 輸入輔助電源供應參考設計

This reference design showcases a method to generate power supplies required in a servo or AC drive including the analog and digtal I/O interfaces, encoder supply, isolated transceivers and digital processing block. This design also implements protection against input reverse polarity, output (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian
VQFN-HR (RNX) 12 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片