首頁 電源管理 LED 驅動器 汽車 LED 驅動器

TLC6C5816-Q1

現行

具診斷功能的車用電源邏輯 16 位元移位暫存器 LED 驅動器

產品詳細資料

Number of channels 16 Topology Open drain Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 40 Iout (max) (A) 0.8 Features Fault Detection, LED Open Detection, LED Short to Ground Detection, Thermal Error Flag, Thermal shutdown
Number of channels 16 Topology Open drain Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 40 Iout (max) (A) 0.8 Features Fault Detection, LED Open Detection, LED Short to Ground Detection, Thermal Error Flag, Thermal shutdown
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125ºC Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H3A
    • Device CDM ESD Classification Level C6
    • Functional safety capable
      • Documentation available to aid functional safety system design
  • 16 Channels With Power DMOS Transistor Outputs
    • Open-Drain Outputs up to 50 mA per Channel
    • Output Voltage Maximum Rating: 45 V
    • Optimized Slew Rate for Reducing EMI
  • Serial Interface and PWM Inputs
    • Shift Register Compatible With TPIC6C596, TLC6C598-Q1, TLC6C5912-Q1
    • LED Status Read-back
    • 2 PWM Inputs for Group Dimming
  • Diagnostics and Protection
    • Configurable LED Open and Short Diagnostics
    • Overtemperature Protection
    • Serial-Interface Communication-Error Detection
    • Open-Drain Error Feedback
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125ºC Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H3A
    • Device CDM ESD Classification Level C6
    • Functional safety capable
      • Documentation available to aid functional safety system design
  • 16 Channels With Power DMOS Transistor Outputs
    • Open-Drain Outputs up to 50 mA per Channel
    • Output Voltage Maximum Rating: 45 V
    • Optimized Slew Rate for Reducing EMI
  • Serial Interface and PWM Inputs
    • Shift Register Compatible With TPIC6C596, TLC6C598-Q1, TLC6C5912-Q1
    • LED Status Read-back
    • 2 PWM Inputs for Group Dimming
  • Diagnostics and Protection
    • Configurable LED Open and Short Diagnostics
    • Overtemperature Protection
    • Serial-Interface Communication-Error Detection
    • Open-Drain Error Feedback

There are various LED indicators in automotive applications. Some applications such as hybrid instrument clusters and E-shifters have safety requirements which must have LED fault diagnostics; other applications such as HVAC panels only have an LED on-off control, which does not require LED diagnostics. To cover both applications, the TLC6C5816-Q1 device implements a flexible LED diagnostics function. By writing to the registers, the output channels can be configured with LED diagnostics features or without LED diagnostics features.

The TLC6C5816-Q1 device is a 16-bit shift register LED driver designed to support automotive LED applications. A built-in LED open and LED short diagnostic mechanism provides enhanced safety protection. The device contains 16 channels with power DMOS transistor outputs. Eight of the channels support LED fault diagnostics by configuring corresponding registers, the device can drive 16 channels without diagnostics or 8 channels with diagnostics. The diagnostics channels DIAGn must connect to DRAINn to realize LED diagnostics. A command error fault implies that a channel is configured for LED diagnostics but a register write command has turned on the channel at the same time. The device provides a cyclic redundancy check to verify register values in the shift registers. In read-back mode, the device provides 6 bits of the CRC remainder. The MCU can read back the CRC remainder and check if the remainder is correct to determine whether the communication loop between MCU and device is good.

There are various LED indicators in automotive applications. Some applications such as hybrid instrument clusters and E-shifters have safety requirements which must have LED fault diagnostics; other applications such as HVAC panels only have an LED on-off control, which does not require LED diagnostics. To cover both applications, the TLC6C5816-Q1 device implements a flexible LED diagnostics function. By writing to the registers, the output channels can be configured with LED diagnostics features or without LED diagnostics features.

The TLC6C5816-Q1 device is a 16-bit shift register LED driver designed to support automotive LED applications. A built-in LED open and LED short diagnostic mechanism provides enhanced safety protection. The device contains 16 channels with power DMOS transistor outputs. Eight of the channels support LED fault diagnostics by configuring corresponding registers, the device can drive 16 channels without diagnostics or 8 channels with diagnostics. The diagnostics channels DIAGn must connect to DRAINn to realize LED diagnostics. A command error fault implies that a channel is configured for LED diagnostics but a register write command has turned on the channel at the same time. The device provides a cyclic redundancy check to verify register values in the shift registers. In read-back mode, the device provides 6 bits of the CRC remainder. The MCU can read back the CRC remainder and check if the remainder is correct to determine whether the communication loop between MCU and device is good.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TLC6C5912-Q1 現行 車用電源邏輯 12 位元移位暫存器 LED 驅動器 TLC6C5816-Q1 is 16 channels while TLC6C5912-Q1 is 12 channels and TLC6C598-Q1 is 8 channels

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TLC6C5816-Q1 Power Logic 16-Bit Shift Register LED Driver With Diagnostics datasheet (Rev. B) PDF | HTML 2020年 1月 16日
White paper 簡化汽車及工業領域的功 能安全認證 2020年 6月 9日
Functional safety information TLC6C5816-Q1 Functional Safety FIT Rate and Failure Mode Distribution (Rev. A) 2020年 2月 14日
EVM User's guide TLC6C5816EVM User's Guide 2017年 9月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLC6C5816EVM — TLC6C5816 16 位元移位暫存器 LED 驅動器評估模組

TLC6C5816EVM is designed to be controlled by TLC6C5816EVM GUI via USB2ANY communication tool. TLC6C5816EVM can be powered by Micro-USB supply, users can use a USB port to power the board easily. TLC6C5816EVM GUI is designed to demonstrate TLC6C5816-Q1 features which can support both single device (...)
使用指南: PDF
TI.com 無法提供
模擬型號

TLC6C5816 IBIS Model

SLAM341.ZIP (101 KB) - IBIS Model
模擬型號

TLC6C5816-Q1 Unencrypted PSpice Transient Model Package (Rev. B)

SLAM309B.ZIP (66 KB) - PSpice Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
參考設計

TIDA-01628 — 車用叢集驅動器通知功能的參考設計

This reference design implements power and driver notification functions typically found in an automotive instrument cluster. The design features reverse battery protection, a pre-boost stage to support cold-crank battery voltage conditions down to 3.5 volts, buck regulators for 3.3-V and 5-V (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片