TS3USB221
- VCC operation from 2.3V and 3.6V
- VI/O accepts signals up to 5.5V
- 1.8V compatible control-pin inputs
- Low-power mode when OE is disabled (1µA)
- RON = 6Ω maximum
- ΔrON = 0.2Ω typical
- CIO(ON) = 6pf maximum
- Low power consumption (30µA maximum)
- ESD > 2000V Human-Body Model (HBM)
- High bandwidth (1GHz typical)
The TS3USB221 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The TS3USB221 is designed for low bit-to-bit skew and high channel to channel noise isolation. The TS3USB221 is also compatible with various standards, such as high-speed USB 2.0 (480Mbps).
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DLPLCR4500EVM — DLP® LightCrafter™ 4500
The DLP® LightCrafter™ 4500 development module provides a flexible light steering solution with high brightness and resolution for industrial, medical and scientific applications. DLP LightCrafter 4500 features the 0.45 WXGA chipset and offers a compelling combination of resolution, (...)
TS3USB221AEVM — TS3USB221A 評估模組
The TS3USB221AEVM is an evaluation module (EVM) for the TS3USB221A high-speed USB 2.0 (480-Mbps) 1:2 multiplexer/demultiplexer switch. The TS3USB221AEVM lets signal pass with minimum edge and phase distortion, integrates ESD protection cells on all pins, and also multiplexes (...)
TS3USB221EEVM — TS3USB221E 評估模組
The TS3USB221EEVM is an evaluation module for the Texas Instruments high-speed USB 2.0 (480-Mbps) 1:2 multiplexer/demultiplexer switch. The USB221EEVM allows signals to pass with minimum edge and phase distortion, integrates IEC-level ESD protection cells on all pins, and also multiplexes (...)
TS3USB221EVM — TS3USB221 評估模組
The TS3USB221EVM is an evaluation module for the Texas Instruments high-speed USB 2.0 (480-Mbps) 1:2 multiplexer/demultiplexer switch. The USB221EVM allows signals to pass with minimum edge and phase distortion and also multiplexes differential signals from a common USB input to one of two (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-00538 — 採用 MaxCharge™ 技術的 1S 5A 快速充電器,可實現高 VIN 及可調式 USB OTG 升壓
TIDA-01582 — 適用於 USB 電力傳輸可編程電源供應的開關電容快速充電參考設計
DLP4500-C350REF — 採用 DLP 技術的高解析度、可攜式光源操控參考設計
TIDA-00254 — 使用 DLP® 技術且適用於 3D 機器視覺應用的精確點雲產生
PMP4496 — 具有快速充電器輸入的 USB-C DRP 行動電源參考設計
TIDA-00590 — 雙電池充電器 IC 參考設計尺寸 (以 Cascode 配置連接)
TIDA-00589 — 適用於行動電源且具有 MaxCharge 和 3.1A 升壓操作的 I2C 控制單芯 5A 快速充電器
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
UQFN (RSE) | 10 | Ultra Librarian |
VSON (DRC) | 10 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。