Startseite Energiemanagement LED-Treiber LED-Beleuchtungstreiber

LM3401

AKTIV

Hysteretischer PFET-Controller für Hochleistungs-LED-Antriebe

Produktdetails

Input voltage type DC/DC Topology Buck Vin (min) (V) 4.5 Vin (max) (V) 35 Vout (max) (V) 33 Vout (min) (V) 0.2 Iout (max) (A) 1 Iq (typ) (mA) 1.05 Features Adjustable Switch Frequency, Enable/Shutdown Operating temperature range (°C) -40 to 125 Dimming method PWM Number of channels 1 Rating Catalog
Input voltage type DC/DC Topology Buck Vin (min) (V) 4.5 Vin (max) (V) 35 Vout (max) (V) 33 Vout (min) (V) 0.2 Iout (max) (A) 1 Iq (typ) (mA) 1.05 Features Adjustable Switch Frequency, Enable/Shutdown Operating temperature range (°C) -40 to 125 Dimming method PWM Number of channels 1 Rating Catalog
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Hysteretic Control for Speed and Simplicity
  • Input Operating Range of 4.5V-35V
  • 1.5MHz Maximum Switching Frequency
  • Low 200mV Reference Voltage
  • Programmable Current Limit
  • High speed CMOS Compatible Enable/Dimming
  • Adjustable Hysteresis
  • Input UVLO
  • No output Capacitor Required
  • 8-pin VSSOP Package

All trademarks are the property of their respective owners.

  • Hysteretic Control for Speed and Simplicity
  • Input Operating Range of 4.5V-35V
  • 1.5MHz Maximum Switching Frequency
  • Low 200mV Reference Voltage
  • Programmable Current Limit
  • High speed CMOS Compatible Enable/Dimming
  • Adjustable Hysteresis
  • Input UVLO
  • No output Capacitor Required
  • 8-pin VSSOP Package

All trademarks are the property of their respective owners.

The LM3401 is a switching controller designed to provide constant current to high power LEDs. The LM3401 drives an external P-MOSFET switch for step-down (Buck) regulators. The LM3401 delivers constant current within ±6% accuracy to a wide variety and number of series connected LEDs. Output current is adjusted with an external current sensing resistor to drive high power LEDs in excess of 1A.

For improved accuracy and efficiency, the LM3401 features dual-side hysteresis, very low reference voltage, and short propagation delay. A cycle by cycle current limit provides protection against over current and short circuit failures. Additional features include adjustable hysteresis and a CMOS compatible input pin for PWM dimming.

The LM3401 is a switching controller designed to provide constant current to high power LEDs. The LM3401 drives an external P-MOSFET switch for step-down (Buck) regulators. The LM3401 delivers constant current within ±6% accuracy to a wide variety and number of series connected LEDs. Output current is adjusted with an external current sensing resistor to drive high power LEDs in excess of 1A.

For improved accuracy and efficiency, the LM3401 features dual-side hysteresis, very low reference voltage, and short propagation delay. A cycle by cycle current limit provides protection against over current and short circuit failures. Additional features include adjustable hysteresis and a CMOS compatible input pin for PWM dimming.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet LM3401 Hysteretic PFET Controller for High Power LED Drive datasheet (Rev. C) 02 Mai 2013
White paper Common LED Functions and LED Driver Design Considerations 21 Sep 2020
Application note AN-1656 Design Challenges of Switching LED Drivers (Rev. A) 03 Mai 2013
EVM User's guide AN-1657 LM3401 Demo Board (Rev. C) 01 Mai 2013
Application note AN-1982 Small, Wide Input Voltage Range LM2842 Keeps LEDs Cool (Rev. A) 23 Apr 2013
User guide LM3401 MR16 Reference Design for Non-Dimming & Dimming LED Application Usr Guide 27 Jan 2012

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM3401-MR16DEMO — LM3401 MR16-Glühlampen-Referenzdesign für nicht dimmbare und dimmbare LED-Anwendungen

This reference design was based on the released LM3401 evaluation board and associated application note AN-1657. The circuit and BOM was modified to optimize performance in MR16 solutions. A PCB was created that fits into the MR16 cavity. For fast bench set-up, the LM3401 evaluation board can be (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

LM3401EVAL — LM3401 Hysterese-PFET-Controller für High-Power-LED-Treiber-Evaluierungsmodul

The LM3401 is a switching buck regulator derived current source designed to drive a series string of high power, high brightness LEDs. The LM3401 controls an external P-FET, allowing the user to select a power device for the desired level of forward LED current. The LM3401 demo board can supply (...)

Benutzerhandbuch: PDF
Simulationsmodell

LM3401 PSpice Transient Model

SNVM694.ZIP (57 KB) - PSpice Model
Simulationsmodell

LM3401 TINA-TI Transient Reference Design

SNVMBE7.TSC (2048 KB) - TINA-TI Reference Design
Simulationsmodell

LM3401 TINA-TI Transient Spice Model

SNVMBE6.ZIP (17 KB) - TINA-TI Spice Model
Berechnungstool

LED-CIE1931-COLOR-CALCULATOR Accurately Plot LED Colour from a Power Spectrum (Excel)

Excel spreadsheet outlining LED color calculations performed in the article Accurately Plot LED Colour from a Power Spectrum by Donald Schelle. Includes calculations to plot LED color on a CIE 1931 xyY chart from its LED power spectrum.

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
LED-Beleuchtungstreiber
LM3401 Hysteretischer PFET-Controller für Hochleistungs-LED-Antriebe
Berechnungstool

LM3401DESIGN-CALC — LM3401 Komponentenrechner

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSSOP (DGK) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos