GUI para el módulo de evaluación (EVM)
DRV10983
Controlador de motor BLDC trifásico, 24 V nominal, pico de 3 A, control sinusoidal sin sensor
Hoja de datos
DRV10983
- Input Voltage Range: 8 to 28 V
- Total Driver H + L rDS(on): 250 mΩ
- Drive Current: 2-A Continuous Winding Current (3-A Peak)
- Sensorless Proprietary Back Electromotive Force (BEMF) Control Scheme
- Continuous Sinusoidal 180° Commutation
- No External Sense Resistor Required
- For Flexibility User May Include External Sense Resistor to Monitor Power Delivered to Motor
- Flexible User Interface Options:
- I2C Interface: Access Registers for Command and Feedback
- Dedicated SPEED Pin: Accepts Either Analog or PWM Input
- Dedicated FG Pin: Provides TACH Feedback
- Spin-Up Profile Customizable With EEPROM
- Forward-Reverse Control With DIR Pin
- Integrated Step-Down Regulator to Efficiently Provide Voltage (5 V or 3.3 V) for Internal and External Circuits
- Supply Current 3 mA With Standby Version (DRV10983)
- Supply Current 180 µA With Sleep Version (DRV10983Z)
- Overcurrent Protection
- Lock Detection
- Voltage Surge Protection
- UVLO Protection
- Thermal Shutdown Protection
- Thermally-Enhanced 24-Pin HTSSOP
The DRV10983 device is a three-phase sensorless motor driver with integrated power MOSFETs, which can provide continuous drive current up to 2 A. The device is specifically designed for cost-sensitive, low-noise, low-external-component-count applications.
The DRV10983 device uses a proprietary sensorless control scheme to provide continuous sinusoidal drive, which significantly reduces the pure tone acoustics that typically occur as a result of commutation. The interface to the device is designed to be simple and flexible. The motor can be controlled directly through PWM, analog, or I2C inputs. Motor speed feedback is available through either the FG pin or I2C.
The DRV10983 device features an integrated step-down regulator to efficiently step down the supply voltage to either 5 or 3.3 V for powering both internal and external circuits. The device is available in either a sleep mode or a standby mode version to conserve power when the motor is not running. The standby mode (3-mA) version leaves the regulator running and the sleep mode (180-µA) version shuts it off. Use the standby mode version in applications where the regulator is used to power an external microcontroller.
TI provides DRV10983 tuning Guide for quick setup and tuning of the device for optimal performance.
An I2C interface allows the user to reprogram specific motor parameters in registers and program the EEPROM to help optimize the performance for a given application. The DRV10983 device is available in a thermally efficient HTSSOP, 24-pin package with an exposed thermal pad. The operating temperature is specified from –40°C to 125°C.
Productos similares que pueden interesarle
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 22 Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
DRV10983EVM — Módulo de evaluación de controlador de motor sin escobillas y trifásico DRV10983
The DRV10983EVM (evaluation module) serves as a user-friendly evaluation kit to demonstrate TI’s brushless motor driver DRV10983. A GUI software and user guide are provided to help customers tune and configure Sensorless BLDC motors for proper operation. This EVM is a high-performance, (...)
Guía del usuario: PDF
Placa de evaluación
DRV10983EVM-TB — Placa de destino DRV10983EVM
The DRV10983EVM-TB (target board) provides a method to quickly program a limited quantity of devices. This makes initial pilot runs of the device easy to implement. The target board contains a boost converter to create the necessary voltage required to reprogram the settings in the device. The (...)
Herramienta de programación de software
SLOC316 — DRV10983 Programming Tool
Productos y hardware compatibles
Productos
Controladores BLDC de control integrado
Desarrollo de hardware
Placa de evaluación
Diseños de referencia
TIDA-00386 — Controlador de ventilador de techo BLDC con control de corriente sinusoidal sin sensor
This reference design is a brushless DC ceiling fan controller that runs from AC power. It features the DRV10983 24-V three-phase motor driver to drive motors with sinusoidal current and sensorless control. The UCC28630 converts 90-265 VAC into 24 VDC. The MSP430G2201 value-line (...)
Diseños de referencia
TIDA-00652 — Diseño de referencia de PFC reductor de 90 VCA a 265 VCA, de un 91 % de eficiencia, >0.94 PF más con
For achieving energy efficiency, ceiling fans and ventilation fans are moving from simple AC induction motors to brushless DC motors (BLDC). Operation of BLDC motors from AC supply requires AC-DC conversion with high efficiency and power factor. It also needs an inverter which is controlled (...)
Diseños de referencia
TIDA-00447 — Diseño de referencia de la unidad de motor CC sin escobillas de sensor doble de 24 V, 100 W/30 W
TIDA-00447 is a 24V, dual Brushless DC (BLDC) motor drive reference design to be used in major home appliances to drive low voltage BLDC motors such as pumps and fans, e.g. for circulation pump and drain pump of dishwashers. The power stages of motor drive are designed for 100W and 30W of (...)
Diseños de referencia
TIDA-01417 — Diseño de referencia de adaptación de la unidad de motor BLDC integrada, sin sensores, de 30 W y con
This reference design drives the low-voltage brushless DC (BLDC) motor with universal AC power supply input. The design has an onboard, reinforced isolated AC/DC switch power supply to convert the AC main input to isolated low-voltage DC output. It also combines a fully-integrated and (...)
Diseños de referencia
TIDA-01373 — Diseño de referencia de la herramienta de programación EEPROM
The TIDA-01373 is a reference hardware and software example of a scalable programming tool for the DRV10983, DRV10975, DRV10983-Q1, and DRV10987 integrated BLDC motor drivers. These devices feature configurable EEPROM registers that need to be set to motor-specific parameters. This reference (...)
Diseños de referencia
TIDA-01223 — Diseño de referencia de unidad BLDC de una capa, sinusoidal, de 180°, 24 V/2 A y sin sensor para dis
This single layer reference design is for pedestal fan and other similar appliances and has board size of 2-inch diameter and an integrated controller that reduces the component count. In addition, sensorless control eliminates the need for hall sensors and has multiple protection features such as (...)
Diseños de referencia
TIDA-00656 — Diseño de referencia del control sinusoidal del motor BLDC de 24 V, 50 W para ventiladores de purifi
The TIDA-00656 reference design is a cost-effective, small form-factor (SFF), three-phase sinusoidal motor drive for brushless DC (BLDC) motor up to a power of 50 W at 24 V. The board accepts 24 V at the input and provides three motor outputs to drive the BLDC motor sinusoidally. By using a (...)
Diseños de referencia
TIDA-00297 — Soluciones de control de motores de ventiladores y amortiguadores de refrigerador
Refrigerators often use a damper to control airflow and a fan to provide circulation. While discrete solutions have been used for years, this reference design uses integrated motor drivers that provide easy control, high performance and full protection. DRV8848 drives the stepper motor (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HTSSOP (PWP) | 24 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.