Herramienta de cálculo
TPS2553
Interruptor de alimentación USB de 85 mΩ, ILIMIT ajustable de 0.075-1.7 A Interruptor de alimentació
Hoja de datos
TPS2553
- Up to 1.5-A Maximum Load Current
- ±6% Current-Limit Accuracy at 1.7 A (Typical)
- Meets USB Current-Limiting Requirements
- Backwards Compatible With TPS2550 and TPS2551
- Adjustable Current Limit: 75 mA to 1700 mA (Typical)
- Constant-Current (TPS255x) and Latch-Off (TPS255x-1) Versions
- Fast Overcurrent Response - 2 µs (Typical)
- 85-mΩ High-Side MOSFET (DBV Package)
- Reverse Input-Output Voltage Protection
- Operating Range: 2.5 V to 6.5 V
- Built-In Soft Start
- 15-kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
- UL Listed – File No. E169910 and NEMKO IEC60950-1-am1 ed2.0
- See the TI Switch Portfolio
The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5 A of continuous load current. These devices offer a programmable current-limit threshold between 75 mA and 1.7 A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.
TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
Productos similares que pueden interesarle
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPS255xx Precision Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. F) | PDF | HTML | 15 ago 2014 |
| Certificate | TPS255x UL 2367 Certificate of Compliance E169910-20090213 | 25 jun 2024 | ||
| Certificate | TPS255x UL Certificate of Compliance IEC 62368-1 (Rev. A) | 24 jun 2024 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 25 jun 2018 | ||
| Design guide | 2-Port USB 3.0 Hub (TIDA-00287) | 01 ago 2014 | ||
| User guide | Power-Distribution Switch with Adjustable Current-Limit EVM | 08 oct 2008 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
TPS2553DBVEVM-364 — Interruptor de distribución de alimentación con módulo de evaluación con corriente limitada ajustabl
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
Guía del usuario: PDF
Placa de evaluación
TPS2553DRVEVM-364 — Interruptor de distribución de alimentación con módulo de evaluación con corriente limitada ajustabl
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
Guía del usuario: PDF
Modelo de simulación
TPS2553 TINA-TI Transient Reference Design
SLVM869.TSC (140 KB) - TINA-TI Reference Design
Modelo de simulación
TPS2553 TINA-TI Transient Spice Model
SLVM868.ZIP (43 KB) - TINA-TI Spice Model
Modelo de simulación
TPS2553 Unencrypted PSpice Transient Model Package (Rev. B)
SLVM425B.ZIP (47 KB) - PSpice Model
Diseños de referencia
TIDA-010008 — Diseño de referencia basado en TVS de abrazadera plana para protección contra transitorios para apli
This reference design features multiple approaches for protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Diseños de referencia
TIDM-HAHSCPTO — Diseño de referencia de contador de alta velocidad (HSC) y salida del tren de impulsos (TDF) de alta
This reference design provides firmware and test platform for two different industrial input/output functions related to motion control: high-speed counter (HSC) and pulse-train output (PTO). The design is based on a microcontroller platform that is suitable for use in industrial applications (...)
Diseños de referencia
TIDA-00287 — Diseño de referencia de hub USB 3.0 de 2 puertos
This verified reference design is a two-port, USB 3.0 compliant hub. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports.
The hub design provides power (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.