Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)

TPS61022

ACTIVO

Convertidor elevador de 8 A con tensión de entrada ultrabaja de 0.5 V

Haga su pedido ahora
Hoja de datos

TPS61022

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 0.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Bypass Mode Pass-through Mode, Enable, Light Load Efficiency, Load Disconnect, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 2.2 Vout (max) (V) 5.5 Iq (typ) (µA) 27 Duty cycle (max) (%) 97 Switch current limit (typ) (A) 8
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Vin (min) (V) 0.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Bypass Mode Pass-through Mode, Enable, Light Load Efficiency, Load Disconnect, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 2.2 Vout (max) (V) 5.5 Iq (typ) (µA) 27 Duty cycle (max) (%) 97 Switch current limit (typ) (A) 8
VQFN-HR (RWU) 7 4 mm² 2 x 2
  • Input voltage range: 0.5 V to 5.5 V
  • 1.8-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 12-mΩ (LS) / 18-mΩ (HS) MOSFETs
  • 8-A valley switching current limit
  • 94.7% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 3 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.6-MHz switching frequency when VIN < 1 V
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Pin-selectable auto PFM operation mode or forced PWM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2-mm × 2-mm VQFN 7-pin package
  • Input voltage range: 0.5 V to 5.5 V
  • 1.8-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 12-mΩ (LS) / 18-mΩ (HS) MOSFETs
  • 8-A valley switching current limit
  • 94.7% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 3 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.6-MHz switching frequency when VIN < 1 V
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Pin-selectable auto PFM operation mode or forced PWM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2-mm × 2-mm VQFN 7-pin package

The TPS61022 provides a power supply solution for portable equipment and IoT devices powered by various batteries and super capacitors. The TPS61022 has minimum 6.5-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to 5.5 V, the TPS61022 supports supercapacitor backup power applications, which may deeply discharge the supercapacitor.

The TPS61022 operates at 1-MHz switching frequency when the input voltage is above 1.5 V. the switching frequency decreases gradually to 0.6 MHz when the input voltage is below 1.5 V down to 1 V. A MODE pin sets the TPS61022 operating either in power-save mode or forced PWM mode in light load condition. The TPS61022 only consumes a 26-µA quiescent current from VOUT in light load condition. During shutdown, the load is completely disconnected from the input power. The TPS61022 has 5.7-V output overvoltage protection, output short-circuit protection, and thermal shutdown protection.

The TPS61022 offers a very small solution size with its 2-mm × 2-mm VQFN package and minimum amount of external components.

The TPS61022 provides a power supply solution for portable equipment and IoT devices powered by various batteries and super capacitors. The TPS61022 has minimum 6.5-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to 5.5 V, the TPS61022 supports supercapacitor backup power applications, which may deeply discharge the supercapacitor.

The TPS61022 operates at 1-MHz switching frequency when the input voltage is above 1.5 V. the switching frequency decreases gradually to 0.6 MHz when the input voltage is below 1.5 V down to 1 V. A MODE pin sets the TPS61022 operating either in power-save mode or forced PWM mode in light load condition. The TPS61022 only consumes a 26-µA quiescent current from VOUT in light load condition. During shutdown, the load is completely disconnected from the input power. The TPS61022 has 5.7-V output overvoltage protection, output short-circuit protection, and thermal shutdown protection.

The TPS61022 offers a very small solution size with its 2-mm × 2-mm VQFN package and minimum amount of external components.
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS61033 ACTIVO Convertidor elevador de 5 V y 5 A con buena alimentación, descarga de salida y control PFM/PWM 5A/1.5A valley switch current limit and SOT583 packge with size of 2.1 x 1.2mm
TPS61230A ACTIVO Convertidor elevador de 5 V/6 A de alta eficiencia en encapsulado QFN de 2.0 mm × 2.0 mm Current limited is 5 A which is smaller than TPS61022 at 8 A

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Tipo Título Fecha
* Data sheet TPS61022 8-A Boost Converter with 0.5-V Ultra-low Input Voltage datasheet (Rev. D) PDF | HTML 28 jul 2021
Application note Hysteresis Control MPPT Method with Generic DC/DC Converter PDF | HTML 21 jun 2024
Application note Adjustable Undervoltage Lockout Circuit Used in TPS61022 and TPS61023 (Rev. A) PDF | HTML 01 nov 2022
Application brief Mechanism of TPS61022 PFM and Load Threshold Between PFM and PWM for TPS61xxx PDF | HTML 10 mar 2022
Technical article Effective ways to implement backup power from supercapacitors PDF | HTML 02 nov 2021
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 feb 2021
Application note TPS61022 and TPS61023 Boost Converters Layout Guidelines 20 may 2020
Application note Designing Boost Converter TPS61022 for Supercap Backup Power Applications PDF | HTML 19 mar 2020
Application brief Supercap last gasp failsafe power for RF comunications in E-Meters 27 ene 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS61022EVM-034 — Módulo de evaluación TPS61022RWU

TPS61022 is an 8-A boost converter with ultra-low input voltage. It features 0.5-V to 5.5-V input voltage range, 2.2-V to 5.5-V adjustable output voltage  and up to 8-A input current capability. It also features a special MODE pin to enable or disable the power save mode.

The TPS61022EVM-034 is the (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPS61022 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCZ3A.ZIP (119 KB) - PSpice Model
Descargar
Herramienta de cálculo

SLVC760 — TPS61022 Calculation Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS61022 — Convertidor elevador de 8 A con tensión de entrada ultrabaja de 0.5 V
Descargar
Diseños de referencia

PMP30528 — Fuente de alimentación de reserva de supercondensadores para el diseño de referencia de medidores de

This reference design automatically provides back-up voltages to an E-Meter during a power interruption. While the input voltage is between 10 V to 12 V, two buck controllers (TPS62147, TPS62173) generate 3.9 V at 2 A and 5 V at 150 mA. An optional synchronous boost generates 3.3 V at 50 mA. A (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (RWU) 7 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos