Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)

TPS61046

ACTIVO

Convertidor de aumento de tensión de salida de 28 V en el paquete WCSP

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Boost Type Converter Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 850 Switching frequency (max) (kHz) 1250 Features Enable, Light Load Efficiency, Load Disconnect, Nonsynchronous Vout (min) (V) 4.5 Vout (max) (V) 28 Iq (typ) (µA) 110 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 0.9
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Boost Type Converter Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 850 Switching frequency (max) (kHz) 1250 Features Enable, Light Load Efficiency, Load Disconnect, Nonsynchronous Vout (min) (V) 4.5 Vout (max) (V) 28 Iq (typ) (µA) 110 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 0.9
DSBGA (YFF) 6 1.4000000000000001 mm² 1 x 1.4000000000000001
  • Input Voltage Range: 1.8 V to 5.5 V, 1.6 V after
    Startup
  • Output Voltage Up to 28 V
  • Integrated Power Diode and Isolation Switch
  • 900-mA (typical) Switch Current
  • Up to 85% Efficiency at 3.6-V Input and 12-V
    Output
  • 500-nA Ultra-low Shutdown Current
  • ±2% Output Voltage Accuracy
  • Power Save Operation Mode at Light Load
  • Internal 10-ms Soft Start Time
  • True Disconnection between Input and Output
    during Shutdown
  • Output Short Circuit Protection
  • Output Over-Voltage Protection
  • Thermal Shutdown Protection
  • 0.80-mm × 1.20-mm WCSP package
  • Input Voltage Range: 1.8 V to 5.5 V, 1.6 V after
    Startup
  • Output Voltage Up to 28 V
  • Integrated Power Diode and Isolation Switch
  • 900-mA (typical) Switch Current
  • Up to 85% Efficiency at 3.6-V Input and 12-V
    Output
  • 500-nA Ultra-low Shutdown Current
  • ±2% Output Voltage Accuracy
  • Power Save Operation Mode at Light Load
  • Internal 10-ms Soft Start Time
  • True Disconnection between Input and Output
    during Shutdown
  • Output Short Circuit Protection
  • Output Over-Voltage Protection
  • Thermal Shutdown Protection
  • 0.80-mm × 1.20-mm WCSP package

The TPS61046 is a highly integrated boost converter designed for applications requiring high voltage and tiny solution size such as PMOLED panel and sensor module. The TPS61046 integrates a 30-V power switch, input/output isolation switch, and power diode. It can output up to 28 V from input of a Li+ battery or two cell alkaline batteries in series.

The TPS61046 operates with a switching frequency at 1.0 MHz. This allows the use of small external components. The TPS61046 has an internal default 12-V output voltage setting by connecting the FB pin to the VIN pin. Thus it only needs three external components to get 12-V output voltage. Together with WCSP package, the TPS61046 gives a very small overall solution size. The TPS61046 has typical 900-mA switch current limit. It has 10-ms built-in soft start time to minimize the inrush current. When the TPS61046 is in shutdown mode, the isolation switch disconnects the output from input to minimize the leakage current. The TPS61064 also implements output short circuit protection, output over-voltage protection and thermal shutdown.

The TPS61046 is available in a 6-pin 0.80-mm × 1.20-mm WCSP package.

The TPS61046 is a highly integrated boost converter designed for applications requiring high voltage and tiny solution size such as PMOLED panel and sensor module. The TPS61046 integrates a 30-V power switch, input/output isolation switch, and power diode. It can output up to 28 V from input of a Li+ battery or two cell alkaline batteries in series.

The TPS61046 operates with a switching frequency at 1.0 MHz. This allows the use of small external components. The TPS61046 has an internal default 12-V output voltage setting by connecting the FB pin to the VIN pin. Thus it only needs three external components to get 12-V output voltage. Together with WCSP package, the TPS61046 gives a very small overall solution size. The TPS61046 has typical 900-mA switch current limit. It has 10-ms built-in soft start time to minimize the inrush current. When the TPS61046 is in shutdown mode, the isolation switch disconnects the output from input to minimize the leakage current. The TPS61064 also implements output short circuit protection, output over-voltage protection and thermal shutdown.

The TPS61046 is available in a 6-pin 0.80-mm × 1.20-mm WCSP package.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS61376 ACTIVO Convertidor elevador de 25 V, 4.5 A, con límite de corriente media de entrada del 2.5 % de precisión TPS61376 has adjustable input current limited feature
Funcionalidad similar a la del dispositivo comparado
TPS61093 ACTIVO Convertidor elevador CC/CC de 20 V/1.1 A de entrada baja, con diodo de potencia integrado y aislamie For applications requiring higher current limits or QFN package.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 17
Tipo Título Fecha
* Data sheet TPS61046 28-V Output Voltage Boost Converter in WCSP Package datasheet PDF | HTML 15 abr 2015
Technical article How to design wearables that are smaller and go longer between charges PDF | HTML 05 ene 2024
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28 oct 2022
Application note Using External Bias to Broaden Input Voltage Range of Boost Converters PDF | HTML 08 nov 2021
Technical article Do all rails need low Iq? PDF | HTML 15 jul 2019
Application note AN-1112 DSBGA Wafer Level Chip Scale Package (Rev. AI) 14 jun 2019
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11 dic 2018
Technical article Power a RS-485 transceiver with a high efficiency flyback converter PDF | HTML 27 dic 2017
Application note Input Current Limit Solution for USB-Supplied Power System 03 ago 2017
Application note How to Select a Proper Inductor for Low Power Boost Converter 03 jun 2016
Application note Five Steps to a Good PCB Layout of the Boost Converter PDF | HTML 03 may 2016
Test report Power Management Reference Design for a Wearable Device with Wireless Charging (Rev. A) PDF | HTML 14 abr 2016
EVM User's guide TPS61046 Evaluation Module User's Guide 28 abr 2015
Application note Automated Frequency Response Analyzer 09 oct 2013
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 26 abr 2012
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17 jun 2011
Application note Minimizing Ringing at the Switch Node of a Boost Converter 15 sep 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS61046EVM-682 — Módulo de evaluación TPS61046 de convertidor elevador de 28 V en encapsulado WCSP

This EVM is used to evaluate the 28V boost converter TPS61046, which is a highly integrated boost converter designed for applications requiring high voltage and tiny solution size such as PMOLED panel. There are two TPS61046 evaluation circuits in the EVM: one is adjustable VOUT version in which (...)

Guía del usuario: PDF
Modelo de simulación

Unencrypted TPS61046 PSpice Transient Model Package (Rev. A)

SLVMB38A.ZIP (27 KB) - PSpice Model
Diseños de referencia

PMP11311 — Diseño de referencia de alimentación para un dispositivo portátil con carga inalámbrica utilizando e

Wearable devices require advanced power management to achieve long battery run times with always-on functionality.  Additionally, the devices need to use small rechargeable batteries and enable small footprint designs.  This application note shows the implementation of a scalable power (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP9801 — Diseño de referencia de fuente de alimentación aislada de 4000 V y salida de 5 V para aplicaciones R

This reference design showcases a 5-V output, 4000-V isolated Flyback DC/DC converter for RS485 applications. Using the boost converter TPS61046, the circuit supports wide input voltage range and up to 250mA output current with 78% efficiency from a 10-V input. The reference design uses an adaptive (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00712 — Diseño de referencia de la solución de gestión de baterías SmartWatch

This reference design is for smartwatch battery management solution (BMS). It is suitable for low-power wearable devices like smartwatch applications. The design includes an ultra-low current 1 cell Li-ion linear charger; a highly integrated Qi-compliant wireless power receiver; a (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00462 — Diseño de referencia de BoosterPack de medición de distancia ultrasónica

The TIDA-00462 ultrasonic distance measurement reference design can measure the distance up to 99 inches with an accuracy of ±1.5 inches. The scope of this design is to give you a head-start in integrating our industrial ultra-low-power MCU, analog signal conditioning and power (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 6 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos