Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)

TPS61378-Q1

ACTIVO

Convertidor boost síncrono de 4.8 A y salida de 18.5 V con desconexión de carga

Haga su pedido ahora
Hoja de datos

TPS61378-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Boost Type Converter Vin (min) (V) 2.3 Vin (max) (V) 14 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Control mode current mode Vout (min) (V) 4 Vout (max) (V) 18.5 Iq (typ) (µA) 35 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.8
Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Boost Type Converter Vin (min) (V) 2.3 Vin (max) (V) 14 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Control mode current mode Vout (min) (V) 4 Vout (max) (V) 18.5 Iq (typ) (µA) 35 Duty cycle (max) (%) 90 Switch current limit (typ) (A) 4.8
WQFN (RTE) 16 9 mm² 3 x 3
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • TPS61378-Q1 Wettable Flank
  • TPS61378L-Q1 Immersion Sn
    • Provides shorter production cycle time and longer shelf life
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3V to 14V
    • Programmable output voltage : 4.0V to 18.5V
    • Input voltage range: 2.3V to 14V
    • Fixed output options: 5V, 5.25V, and 5.5V
    • Programmable peak current limit: 1A to 4.8A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200kHz to 2.2MHz
    • Spread spectrum frequency modulation at FPWM mode
    • Optional clock synchronization
  • Minimize solution size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50mΩ/50mΩ/100mΩ
    • Support up to 2.2MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25µA quiescent current into VIN pin
    • 0.5µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short circuit protection
    • Power good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8A load from 3.3V to 9V conversion
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • TPS61378-Q1 Wettable Flank
  • TPS61378L-Q1 Immersion Sn
    • Provides shorter production cycle time and longer shelf life
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3V to 14V
    • Programmable output voltage : 4.0V to 18.5V
    • Input voltage range: 2.3V to 14V
    • Fixed output options: 5V, 5.25V, and 5.5V
    • Programmable peak current limit: 1A to 4.8A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200kHz to 2.2MHz
    • Spread spectrum frequency modulation at FPWM mode
    • Optional clock synchronization
  • Minimize solution size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50mΩ/50mΩ/100mΩ
    • Support up to 2.2MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25µA quiescent current into VIN pin
    • 0.5µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short circuit protection
    • Power good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8A load from 3.3V to 9V conversion

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3V to 14V while the maximal output voltage covers up to 18.5V. The switching current limit is programmable from 1A to 4.8A. The device consumes 25µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200kHz to 2.2MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. It supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. It also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3mm × 3mm 16-pin QFN package with wettable flank.

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3V to 14V while the maximal output voltage covers up to 18.5V. The switching current limit is programmable from 1A to 4.8A. The device consumes 25µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200kHz to 2.2MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. It supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. It also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3mm × 3mm 16-pin QFN package with wettable flank.
filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS61379-Q1 ACTIVO Convertidor elevador síncrono de corriente quiescente de 25 µA This product has a fixed 2-A switch current limit.
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM5157-Q1 ACTIVO Convertidor elevador, de retorno y SEPIC con VIN amplia de 6 A, 50 V y 2.2 MHz y amplio espectro ale LM5157-Q1 with higher VIN range (up to 45 V) and VOUT range (up to 48 V).
TPS55340-Q1 ACTIVO Regulador CC-CC integrado de rango de entrada amplio de 5 A y 40 V Boost/SEPIC/Flyback, con certific Higher VIN range (up to 38 V) and VOUT range (up to 38 V).

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPS61378-Q1 25-µA Quiescent Current Synchronous Boost Converter with Load Disconnect datasheet (Rev. E) PDF | HTML 17 oct 2024
Application brief Novel Plating Technology for Wettable-Flank QFN and SON Packages (Rev. A) 15 oct 2024
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 feb 2021
Functional safety information TPS61378-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. C) PDF | HTML 20 oct 2020
User guide TPS61378Q1EVM-060 Evaluation Module (Rev. A) PDF | HTML 11 sep 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS61378Q1EVM-060 — Módulo de evaluación TPS61378QRTE

The TPS61378Q1EVM-060 allows you to evaluate the TPS61378-Q1 fully-integrated synchronous boost converter with optional load disconnect function. The device is suitable as a post-boost for automotive applications, boosting from a regulated 3.3-V or 5-V rail with a programmable current limit up to (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

TPS61379Q1EVM-082 — Módulo de evaluación TPS61379Q1 de convertidor elevador síncrono de IQ de 25 µA

TPS61379-Q1 es un convertidor elevador síncrono totalmente integrado con función de desconexión de carga integrada. El dispositivo es adecuado como post impulso para aplicaciones de automoción con un límite de corriente de 2 A y una tensión de salida máxima de 18.5 V. Admite una tensión de entrada (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS61378-Q1 FPWM Version PSpice model

SLVMDF2.ZIP (92 KB) - PSpice Model
Descargar
Herramienta de cálculo

SLVRBG8 — TPS61378-Q1 Calculation Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS61378-Q1 — Convertidor boost síncrono de 4.8 A y salida de 18.5 V con desconexión de carga
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTE) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos