CC1020
- True Single Chip UHF RF Transceiver
- Frequency Range 402 MHz to 470 MHz
and 804 MHz to 930 MHz - High Sensitivity
- Up to –118 dBm for a 12.5 kHz Channel
- Programmable Output Power
- Low Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- 2.3 V to 3.6 V
- No External IF Filter Needed
- Low-IF Receiver
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency and AFC Make Crystal Temperature Drift Compensation Possible Without TCXO
- Suitable for Frequency Hopping Systems
- Suited for Systems Targeting Compliance With
EN 300 220, FCC CFR47 Part 15, and
ARIB STD-T67 - Easy-to-Use Software for Generating the CC1020 Configuration Data
The CC1020 device is a true single-chip UHF transceiver designed for very low-power and very low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1020 device is especially suited for narrow-band systems with channel spacing of 12.5 or 25 kHz complying with ARIB STD-T67 and EN 300 220.
The main operating parameters of the CC1020 device can be programmed with a serial bus, thus making the CC1020 device a very flexible and easy-to-use transceiver.
In a typical system, the CC1020 device will be used together with a microcontroller and a few external passive components.
TI recommends using the latest RF performance line device CC1120 as successor of the CC1020 device: www.ti.com/rfperformanceline.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | CC1020 Low-Power RF Transceiver for Narrowband Systems datasheet (Rev. I) | PDF | HTML | 2018/08/22 |
* | Errata | CC1020 Errata Notes | 2006/01/31 | |
* | Radiation & reliability report | CC1020 Reliability Report | 2006/04/28 | |
Application note | DN035 -- Antenna Quick Guide (Rev. B) | 2022/02/09 | ||
Application note | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 2013/02/22 | ||
Application note | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012/08/02 | ||
Application note | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 2011/08/30 | ||
Application note | AN058 -- Antenna Selection Guide (Rev. B) | 2010/10/06 | ||
Application note | DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary | 2010/08/26 | ||
More literature | CC1020 Material content | 2007/07/16 | ||
More literature | CC1020 RoHS Confirmation | 2006/01/31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-CC1120-90 — 902MHz ~ 928MHz 범위의 애플리케이션을 위한 BoosterPack
The CC1120-CC1190 BoosterPack™ module is designed to use with the MSP-EXP430F5529 and MSP-EXP430G2553 LauchPad™ development kits and to work as a stand-alone module by using SmartRF Studio application software. The module is equipped with an integrated PCB trace antenna which (...)
RDCR-3P-RADIO-MOD — Radiocrafts 임베디드 라디오 모듈
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
지원되는 제품 및 하드웨어
제품
MSP430 마이크로컨트롤러
저전력 2.4GHz 제품
Sub-1GHz 무선 MCU
Sub-1 GHz 트랜시버
기타 무선 제품
차량용 무선 커넥티비티 제품
하드웨어 개발
개발 키트
평가 보드
인터페이스 어댑터
도터 카드
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN (RSS) | 32 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치