CC3135
- Integrated dual-band Wi-Fi and internet protocols
- 802.11a/b/g/n: 2.4 GHz and 5 GHz
- FIPS 140-2 Level 1 certification
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Coexistence with 2.4-GHz radios
- Industrial temperature: –40°C to +85°C
- Transferable Wi-Fi Alliance certification
- Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11a/b/g/n 2.4 GHz and 5 GHz
- Modes:
- Access point (AP)
- Station (STA)
- Wi-Fi Direct (only supported on 2.4 GHz)
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always, intermittent, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
- Multilayered security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- Application-level security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Secure boot
- Certificate signing request (CSR)
- Unique per device key pair
- Application throughput:
- UDP: 16 Mbps, TCP: 13 Mbps
- Peak: 72 Mbps
- Power-management subsystem
- Integrated DC/DC converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.1 V to 3.6 V
- VIO is always tied with VBAT
- Advanced low-power modes:
- Shutdown: 1 µA, hibernate: 4 µA
- Low-power deep sleep (LPDS): 120 µA
- Idle connected (MCU in LPDS): 710 µA
- RX traffic (MCU active): 53 mA
- TX traffic (MCU active): 223 mA
- Integrated DC/DC converters support a wide range of supply voltage:
- Wi-Fi TX power:
- 2.4 GHz: 18.0 dBm at 1 DSSS
- 5 GHz: 18.1 dBm at 6 OFDM
- Wi-Fi RX sensitivity:
- 2.4 GHz: –96 dBm at 1 DSSS
- 5 GHz: –92 dBm at 6 OFDM
- Clock source:
- 40.0-MHz crystal with internal oscillator
- 32.768-kHz crystal or external RTC
- RGK package
- 64-pin, 9-mm × 9-mm very thin quad flat nonleaded (VQFN) package, 0.5-mm pitch
- Device supports SimpleLink™ MCU Platform developer’s ecosystem
Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, in order to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built in power management for best in class low power performance.
The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.
This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include:
- 802.11a (5 GHz) support
- BLE/2.4 GHz radio coexistence
- Antenna selection
- Enhanced security with FIPS 140-2 Level 1 certification and more. For exact status of FIPS certification for a specific part number, refer to https://csrc.nist.gov/publications/fips.
- Up to 16 concurrent secure sockets
- Certificate sign request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance® certified for IoT applications with low-power capabilities and more
- Hostless mode for offloading template packet transmissions
- Improved fast scan
The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).
The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1 GHz and host MCUs. For more information, visit www.ti.com/simplelink .
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 이중 대역 무선 네트워크 프로세서 BoosterPack™ 플러그인 모듈
CC31XXEMUBOOST — SimpleLink™ Wi-Fi® CC31xx BoosterPack™ 플러그인 모듈을 위한 고급 에뮬레이션 키트
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
WIFISTARTERPRO — SimpleLink&trade, Wi-Fi® 스타터 프로
Download on Google play
The SimpleLink™ Wi-Fi® Starter Pro mobile App is a new mobile application for SimpleLink provisioning. It goes along with the embedded provisioning library and example that runs on the device side. The new provisioning release is TI (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
CCSTUDIO — Code Composer Studio™ 통합 개발 환경(IDE)
Code Composer Studio는 사용자에게 각 애플리케이션 개발 단계를 안내하는 직관적인 사용자 인터페이스를 제공합니다. 최적화 C/C++ 컴파일러, 소스 코드 편집기, 프로젝트 빌드 (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
지원되는 제품 및 하드웨어
제품
Wi-Fi 제품
하드웨어 개발
평가 보드
개발 키트
소프트웨어
소프트웨어 개발 키트(SDK)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
지원되는 제품 및 하드웨어
제품
Wi-Fi 제품
Arm Cortex-M4 MCU
저전력 2.4GHz 제품
하드웨어 개발
평가 보드
개발 키트
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 임베디드 프로그래밍
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
지원되는 제품 및 하드웨어
제품
C2000 실시간 마이크로컨트롤러
Arm 기반 프로세서
산업용 mmWave 레이더 센서
차량용 mmWave 레이더 센서
MSP430 마이크로컨트롤러
Wi-Fi 제품
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
저전력 2.4GHz 제품
차량용 무선 커넥티비티 제품
Sub-1GHz 무선 MCU
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX에 대한 무선 인증
SIMPLELINK-CC3XXX-REPORTS — Reports: CC3XXX Regulatory Certification
Are you looking for CC31XX or CC32XX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of your product. Within this page you will find the latest certification reports of our Modules as well as our evaluation boards for (...)
지원되는 제품 및 하드웨어
제품
Wi-Fi 제품
하드웨어 개발
평가 보드
개발 키트
SIMPLELINK-WIFI-DESIGN-REVIEWS — SimpleLink™ Wi-Fi 장치에 대한 하드웨어 설계 검토
일반 설계 질문은 Wi-Fi 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
CC3301 및 CC3300 기반 설계의 경우 설계 (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN (RGK) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.