MSPM0C1104-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- Core
- Arm 32-bit Cortex-M0+ CPU, frequency up to 24MHz
- Operating characteristics
- Extended temperature: –40°C to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 16KB of flash
- 1KB of SRAM
- High-performance analog peripherals
- One analog-to-digital converter (ADC) with up to 10 total external channels, 1.7Msps at 10 bit or 1.5Msps at 12 bit with VDD as the voltage reference
- Configurable 1.4V or 2.5V internal ADC voltage reference (VREF)
- Integrated temperature sensor
- Integrated supply monitor
- Optimized low-power modes
- RUN: 87µA/MHz
- STOP: 609µA at 4MHz, 311µA at 32kHz
- STANDBY: 5µA with SRAM retention
- SHUTDOWN: 200nA
- Intelligent digital peripherals
- 1-channel DMA controller dedicated for ADC
- Three timers supporting up to 14 PWM channels
- One 16-bit advanced timers with deadband support up to 8 PWM channels
- One 16-bit general purpose timer with 4 capture/compares
- One 16-bit general purpose timer with 2 capture/compares
- Windowed watchdog timer
- BEEPER generating 1kHz, 2kHz, 4kHz, or 8kHz square wave to drive the external beeper
- Enhanced communication interfaces
- One UART interface supporting LIN, IrDA, DALI, smart card, Manchester and low-power operation in STANDBY mode
- One I2C interface supporting FM+ (1Mbps), SMBus, PMBus, and wakeup from STOP mode
- One SPI supporting up to 12Mbps
- Clock system
- Internal 24MHz oscillator with an accuracy from -2% to +1.2% (SYSOSC)
- Internal 32kHz low-frequency oscillator (LFOSC)
- Data integrity
- Cyclic redundancy checker (CRC-16)
- Flexible I/O features
- Up to 18 GPIOs
- Two 5V-tolerant open-drain IOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 20-pin VSSOP (DGS)
- 20-pin WQFN (RUK)
- 16-pin SOT (DYY)
- 8-pin SOT (DDF)
- 8-pin WSON (DSG)
- Family members (also see Device Comparison)
- MSPM0C1104: 16KB of flash, 1KB of RAM
- MSPM0C1103: 8KB of flash, 1KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0C1104 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 24MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.
The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2% to +1.2%, eliminating the need for an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.5Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration let customers find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.
MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 C-Series 24MHz Microcontrollers Technical Reference Manual.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | MSPM0C110x-Q1 Automotive Mixed-Signal Microcontrollers datasheet (Rev. A) | PDF | HTML | 2024/07/31 |
| * | Errata | MSPM0Cxx Mixed-Signal Microcontrollers (Rev. A) | PDF | HTML | 2024/05/23 |
| * | User guide | MSPM0 C-Series 24-MHz Microcontrollers Technical Reference Manual (Rev. A) | PDF | HTML | 2024/05/24 |
| User guide | MSPM0 Design Flow Guide (Rev. C) | PDF | HTML | 2024/07/23 | |
| User guide | MSPM0 C-Series 24-MHz Microcontrollers Technical Reference Manual (Rev. B) | PDF | HTML | 2024/07/17 | |
| Product overview | MSPM0C: A New Standard 32-Bit MCU for 8-Bit and 16-Bit MCU Applications | PDF | HTML | 2024/02/27 | |
| Application note | Migration Guide From STM8 to MSPM0 | PDF | HTML | 2023/12/06 | |
| Application note | Operating Time of MSPM0 Powered by a Capacitor | PDF | HTML | 2023/10/03 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-MSPM0C1104 — 24MHz Arm® Cortex®-M0+ MCU용 MSPM0C1104 LaunchPad™ 개발 키트
LP-MSPM0C1104 LaunchPad™ 개발 키트는 MSPM0C1104에 기반을 둔 사용이 쉬운 EVM(평가 모듈)입니다. 더 작은 폼 팩터 안에 프로그래밍과 디버깅을 위한 온보드 디버그 프로브를 포함하여 MSPM0C1104 M0+ MCU 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 버튼 2개와 LED 1개가 포함되어 있습니다.
MSPM0-SDK — MSPM0 SDK(소프트웨어 개발 키트)
TIDA-010268 — 저압측 MOSFET 제어를 지원하는 5s~7s 배터리 팩 모니터 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RUK) | 20 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.