首頁 電源管理 LED 驅動器 RGB LED 驅動器

LP5812

現行

具備 I2C 和自動動畫控制的 4 x 3 矩陣 RGB LED 驅動器

產品詳細資料

Number of channels 12 LED current per channel (mA) 50 LED configuration Matrix Program memory Yes Topology Linear Programmable ramp control Yes Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features Analog/PWM mixed dimming, Constant current, I2C control, LED Open Detection, LED Short Detection, Programmable lighting engines, Thermal shutdown Iq (typ) (mA) 0.4 Shutdown current (ISD) (typ) (µA) 0.1 Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 12 LED current per channel (mA) 50 LED configuration Matrix Program memory Yes Topology Linear Programmable ramp control Yes Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features Analog/PWM mixed dimming, Constant current, I2C control, LED Open Detection, LED Short Detection, Programmable lighting engines, Thermal shutdown Iq (typ) (mA) 0.4 Shutdown current (ISD) (typ) (µA) 0.1 Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YBH) 9 2.56 mm² 1.6 x 1.6 WSON (DSD) 8 9 mm² 3 x 3
  • Operating voltage range:
    • VCC range: 2.7V to 5.5V
    • Logic pins compatible with 1.8V, 3.3V, and 5V
  • Time-cross-multiplexing (TCM) topology:

    • Drives up to 12 LEDs or 4 RGB LEDs
    • ¼, ⅓, ½, 1 multiplexing ratio
    • Supports direct, TCM, and mix-drive modes

  • 4 constant current sinks with high precision:
    • 0.1mA to 51mA per current sink
    • Device-to-device error: max ±5%
    • Channel-to-channel error: max ±5%
    • Ultra-low headroom voltage: 110mV (typ.) at 25.5mA; 210mV (typ.) at 51mA
    • PWM phase shift configurable for each LED
  • Ultra-low power consumption:
    • Standby: ISTB = 26µA (typical) when CHIP_EN = 0 (data retained)
    • Active: INOR = 0.4mA (typical) when LED current = 25.5mA
  • Analog dimming (current gain control)
    • Global 1-bit Maximum Current (MC): 25.5mA or 51mA
    • Individual 8-bit Dot Current (DC) setting
  • PWM dimming up to audible-noise-free 24kHz
    • Individual 8-bit PWM dimming resolution
    • Linear or exponential dimming curves
  • Autonomous animation engine control
  • Individual LED dot open/short detection
  • Integrated de-ghosting function
  • 1MHz (max.) I2C interface
  • –40°C to 85°C operating temperature range
  • Operating voltage range:
    • VCC range: 2.7V to 5.5V
    • Logic pins compatible with 1.8V, 3.3V, and 5V
  • Time-cross-multiplexing (TCM) topology:

    • Drives up to 12 LEDs or 4 RGB LEDs
    • ¼, ⅓, ½, 1 multiplexing ratio
    • Supports direct, TCM, and mix-drive modes

  • 4 constant current sinks with high precision:
    • 0.1mA to 51mA per current sink
    • Device-to-device error: max ±5%
    • Channel-to-channel error: max ±5%
    • Ultra-low headroom voltage: 110mV (typ.) at 25.5mA; 210mV (typ.) at 51mA
    • PWM phase shift configurable for each LED
  • Ultra-low power consumption:
    • Standby: ISTB = 26µA (typical) when CHIP_EN = 0 (data retained)
    • Active: INOR = 0.4mA (typical) when LED current = 25.5mA
  • Analog dimming (current gain control)
    • Global 1-bit Maximum Current (MC): 25.5mA or 51mA
    • Individual 8-bit Dot Current (DC) setting
  • PWM dimming up to audible-noise-free 24kHz
    • Individual 8-bit PWM dimming resolution
    • Linear or exponential dimming curves
  • Autonomous animation engine control
  • Individual LED dot open/short detection
  • Integrated de-ghosting function
  • 1MHz (max.) I2C interface
  • –40°C to 85°C operating temperature range

The LP5812 is a 4 × 3 matrix RGB LED driver with autonomous animation engine control. The device has ultra-low normal operation current with 0.4mA (typical) when illuminate LEDs.

The time-cross-multiplexing (TCM) structure is adopted, which uses 4 output pins to control 12 LED dots individually. Both high-side scan switch and low-side current sink are contained in one output. The total solution size are minimized for space limited system.

The autonomous animation engine can significantly reduce the real-time loading of controller. Each LED can be configured through the related registers to realize vivid and fancy lighting effects. The device can generate 6MHz clock signal and use it for synchronizing the lighting effects among multiple devices.

The LP5812 is a 4 × 3 matrix RGB LED driver with autonomous animation engine control. The device has ultra-low normal operation current with 0.4mA (typical) when illuminate LEDs.

The time-cross-multiplexing (TCM) structure is adopted, which uses 4 output pins to control 12 LED dots individually. Both high-side scan switch and low-side current sink are contained in one output. The total solution size are minimized for space limited system.

The autonomous animation engine can significantly reduce the real-time loading of controller. Each LED can be configured through the related registers to realize vivid and fancy lighting effects. The device can generate 6MHz clock signal and use it for synchronizing the lighting effects among multiple devices.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
LP5810 現行 具備 I2C 和自動動畫控制的 4 通道 RGBW LED 驅動器 4 channel and linear
功能與所比較的裝置相似
LP5811 現行 具備 I2C 和自動動畫控制的同步升壓 4 通道 RGBW LED 驅動器 4 channel and sync boost
LP5813 現行 具備 I2C 和自動動畫控制的 4 x 3 矩陣 RGB LED 驅動器 4x3 TCM matrix and sync boost

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet LP5812 4 × 3 Matrix RGB LED Driver with Autonomous Control datasheet (Rev. A) PDF | HTML 2024年 8月 8日
User guide LP5812 Register Map PDF | HTML 2024年 10月 15日
Certificate LP5813-12WSONEVM EU Declaration of Conformity (DoC) 2024年 2月 26日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP5813-12WCSPEVM — 具自動控制功能且適用於 4 x 3 LED 矩陣驅動器的 LP5813/LP5812 評估模組

LP5813/12 評估模組展示 LP5813 和 LP5812 4 × 3 矩陣 RGB LED 驅動器的所有功能。兩個裝置之間的差別在於具有或未具有同步升壓功能。LP581x 圖形使用者介面 (GUI) 用於透過 USB2ANY 介接至 EVM。EVM 具有透過 USB2ANY 介面轉接器的 I2C 輸入。

使用指南: PDF | HTML
TI.com 無法提供
開發板

LP5813-12WSONEVM — 適用於 WSON 封裝的 LP5813 和 LP5812 評估模組

LP5813 和 LP5812 評估模組 (EVM) 展示了具有自主控制功能的 LP5813 和 LP5812 4 × 3 矩陣 RGB LED 驅動器的所有功能。‌兩種產品之間的差別在於是否具有同步升壓功能。LP5813 和 LP5812 都位於在同一塊電路板上,請透過 USB2ANY 連接器和跳線設定選擇需要評估的產品。提供名為 LP581x GUI 的圖形使用者介面或 GUI,可透過 USB2ANY 介面轉接器將 USB 介接至 EVM。

使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

LP581XEVM-GUI GUI for LP581x Family LED Drivers

The LP581x-GUI is a evaluation tool for LP581x family devices, it can be used to evaluate the LP581xEVM or customized board through USB2ANY interface adapter and showcases all the features of the LP581x family devices.
支援產品和硬體

支援產品和硬體

產品
RGB LED 驅動器
LP5813 具備 I2C 和自動動畫控制的 4 x 3 矩陣 RGB LED 驅動器 LP5812 具備 I2C 和自動動畫控制的 4 x 3 矩陣 RGB LED 驅動器 LP5811 具備 I2C 和自動動畫控制的同步升壓 4 通道 RGBW LED 驅動器 LP5810 具備 I2C 和自動動畫控制的 4 通道 RGBW LED 驅動器
硬體開發
開發板
LP5813-12WCSPEVM 具自動控制功能且適用於 4 x 3 LED 矩陣驅動器的 LP5813/LP5812 評估模組 LP5813-12WSONEVM 適用於 WSON 封裝的 LP5813 和 LP5812 評估模組 LP5811-10EVM LP5811 和 LP5810 評估模組
啟動 下載選項
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBH) 9 Ultra Librarian
WSON (DSD) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片