TPS65994AD
- This device is certified by the USB-IF for PD3.0
- PD3.0 silicon is required for certification of new USB PD designs
- TID#: 3495
- Article on PD2.0 vs. PD3.0
- PD3.0 silicon is required for certification of new USB PD designs
- TPS65994AD is fully configurable dual port USB4 and Thunderbolt 4 (TBT4) PD3.0 controller
- This device can be used for USB4 host and device designs
- Supports extended industrial temperature range
- GUI tool to easily configure TPS65994AD for various applications
- Support for DisplayPort Source, Thunderbolt and user configurable alternate modes
- For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
- Integrated fully managed power paths:
- Integrated two 5-V, 3-A, 38-mΩ sourcing switches
- UL2367 cert #: E169910
- IEC62368-1 cert #: US-34737-M3-UL
- Integrated robust power path protection
- Integrated overvoltage protection, under voltage protection, reverse current protection, and adjustable current limiting for source path
- Integrated overvoltage protection, under voltage protection and reverse current protection for sink path
- USB Type-C Power Delivery (PD) controller
- 10 configurable GPIOs
- USB PD 3.0 certified
- USB Type-C specification certified
- Cable attach and orientation detection
- Integrated VCONN switch
- Integrated dead battery Rd
- Physical layer and policy engine
- 3.3-V LDO output for dead battery support
- Power supply from 3.3 V or VBUS source
- 1 I2C primary port
- 2 I2C secondary ports
The TPS65994AD is a highly integrated stand-alone Dual Port USB Type-C and Power Delivery (PD) controller for PC and notebooks applications. The TPS65994AD integrates fully managed source paths with robust protection for a complete USB-C PD solution. TPS65994AD is featured on Intel and AMD’s Reference Design for PC and notebook end equipment ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.
索取更多資訊
提供 EVM 使用指南、韌體配置工具 GUI 及更多資訊。立即索取
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS65994AD Dual Port USB Type-C® and USB PD Controller with Integrated Source Power Switches Supporting USB4 and Alternate Mode datasheet (Rev. A) | PDF | HTML | 2021年 7月 27日 |
| Application note | ESD and Surge Protection for USB Interfaces (Rev. B) | PDF | HTML | 2024年 1月 11日 | |
| White paper | A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B) | PDF | HTML | 2022年 3月 25日 | |
| EVM User's guide | TPS65994EVM User Guide (Rev. C) | PDF | HTML | 2020年 11月 23日 | |
| User guide | TPS6598x Application Customization Tool (Rev. C) | 2020年 9月 14日 | ||
| Application note | USB Power Delivery - Compliance Tests (Rev. A) | 2019年 9月 25日 | ||
| White paper | Fast role swap power architecture white paper | 2018年 8月 20日 | ||
| Application note | PD Alternate Mode: DisplayPort (Rev. B) | 2018年 7月 31日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS65994QFNEVM — TPS65994AD (QFN 封裝) 雙埠 USB Type-C® PD 評估模組
TPS65994QFNEVM (QFN 封裝) 是適合雙埠 USB Type-C 和電源傳輸應用的完整參考設計。方便使用者開發各種電源設定檔和 DisplayPort 等的交替模式，並可偵錯現有的 USB Type-C 及電源傳輸系統。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
TIDA-010248 — USB Type-C® 電力輸送和訊號調節器參考設計
此 USB Type-C 電力輸送 (PD) 和 USB Type-C 訊號調節器參考設計提供 5 V 至 20 V 輸出，最大輸出功率 3 A，總輸出功率 60 W。訊號調節器支援 USB 3.2 (10 Gbps)、USB 3.2 x 2 (20 Gbps) 及 DisplayPort 1.4 (8.1 Gbps)。此參考設計適合應用在工業 PC 和 HMI。
Design guide: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RSL) | 48 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。