Startseite Energiemanagement LED-Treiber Kfz-LED-Treiber
Startseite
Energiemanagement
LED-Treiber
Kfz-LED-Treiber

LP5891-Q1

AKTIV

48 x 16 Matrix-LED-Treiber mit 16-Bit Pulsweitenmodulation für die Automobilindustrie

Jetzt bestellen
Datenblatt

LP5891-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 16, 48 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 2.5 Vout (max) (V) 5.5 Iout (max) (A) 0.96 Iq (typ) (mA) 5.5 Features LOD, LSD, De-ghosting, Intelligent power-saving mode
Number of channels 16, 48 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 2.5 Vout (max) (V) 5.5 Iout (max) (A) 0.96 Iq (typ) (mA) 5.5 Features LOD, LSD, De-ghosting, Intelligent power-saving mode
VQFN (RRF) 76 81 mm² 9 x 9
  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V – 5.5 V
    • VR/G/B voltage range: 2.5 V – 5.5 V
  • 48 current source channels from 0.2 mA to 20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.27 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.6 mA with 50-MHz GCLK
    • Intelligent power saving mode with ICC down to 0.9 mA
  • Built-in SRAM to support 1–64 multiplexing
    • Single device to support 48 × 16 LEDs or 16 × 16 RGB pixels
    • Dual devices stackable to support 96 × 32 LEDs or 32 × 32 RGB pixels
    • Three devices stackable to support 144 × 48 LEDs or 48 × 48 RGB pixels
    • Four devices stackable to support 192 × 64 LEDs or 64 × 64 RGB pixels
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK / SIN / SOUT
    • External 50-MHz (max.) SCLK with rising-edge transmission mechanism
    • Internal frequency multiplier to support high frequency GCLK
  • Optimized performances for LED matrix displays
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open, weak-short, short detection and removal
  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V – 5.5 V
    • VR/G/B voltage range: 2.5 V – 5.5 V
  • 48 current source channels from 0.2 mA to 20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.27 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.6 mA with 50-MHz GCLK
    • Intelligent power saving mode with ICC down to 0.9 mA
  • Built-in SRAM to support 1–64 multiplexing
    • Single device to support 48 × 16 LEDs or 16 × 16 RGB pixels
    • Dual devices stackable to support 96 × 32 LEDs or 32 × 32 RGB pixels
    • Three devices stackable to support 144 × 48 LEDs or 48 × 48 RGB pixels
    • Four devices stackable to support 192 × 64 LEDs or 64 × 64 RGB pixels
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK / SIN / SOUT
    • External 50-MHz (max.) SCLK with rising-edge transmission mechanism
    • Internal frequency multiplier to support high frequency GCLK
  • Optimized performances for LED matrix displays
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open, weak-short, short detection and removal

The LP5891-Q1 is a highly integrated, common-cathode LED matrix driver with 48 constant current sources and 16 scanning FETs. The LP5891-Q1 implements a high speed rising-edge transmission interface to support high device count daisy-chained while minimizing electrical-magnetic interference (EMI) and internal GCLK rate ranges from 40 MHz to 160 MHz. The device also implements LED open/weak-short/short detections and removals during operations.

The LP5891-Q1 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. Besides driving 16 × 16 and 32 × 32 RGB LED pixels as LP5890, three LP5891-Q1 devices are capable of driving 48 × 48 RGB LED pixels and stacking four LP5891-Q1 devices can drive 64 × 64 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the LP5891-Q1 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.6 mA).

The LP5891-Q1 implements a high speed rising-edge transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 50-MHz SCLK (external) and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in Narrow Pixel Pitch (NPP) LED display applications and mini and micro-LED products: dim at the first scan line, upper and downside ghosting, non-uniformity in low grayscale, coupling, caterpillar caused by open or short LEDs, which make the LP5891-Q1 a perfect choice in such applications.

The LP5891-Q1 also implements LED open/weak short/short detections and removals during operations and can also report those information out to the accompanying digital processor.

The LP5891-Q1 is a highly integrated, common-cathode LED matrix driver with 48 constant current sources and 16 scanning FETs. The LP5891-Q1 implements a high speed rising-edge transmission interface to support high device count daisy-chained while minimizing electrical-magnetic interference (EMI) and internal GCLK rate ranges from 40 MHz to 160 MHz. The device also implements LED open/weak-short/short detections and removals during operations.

The LP5891-Q1 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. Besides driving 16 × 16 and 32 × 32 RGB LED pixels as LP5890, three LP5891-Q1 devices are capable of driving 48 × 48 RGB LED pixels and stacking four LP5891-Q1 devices can drive 64 × 64 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the LP5891-Q1 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.6 mA).

The LP5891-Q1 implements a high speed rising-edge transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 50-MHz SCLK (external) and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in Narrow Pixel Pitch (NPP) LED display applications and mini and micro-LED products: dim at the first scan line, upper and downside ghosting, non-uniformity in low grayscale, coupling, caterpillar caused by open or short LEDs, which make the LP5891-Q1 a perfect choice in such applications.

The LP5891-Q1 also implements LED open/weak short/short detections and removals during operations and can also report those information out to the accompanying digital processor.
filter Andere Kfz-LED-Treiber suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet LP5891-Q1 Automotive 48 Current Sources, 64 Scans, Common Cathode LED Matrix Driver datasheet (Rev. A) PDF | HTML 19 Dez 2022
User guide LP589x(-Q1)/TLC698x Sample Code User's Guide (Rev. A) PDF | HTML 06 Sep 2024
EVM User's guide LP5891-Q1 48 × 16 Common Cathode Matrix LED Display Driver Evaluation Module (Rev. A) PDF | HTML 24 Apr 2024
Certificate LP5891Q1EVM EU RoHS Declaration of Conformity (DoC) 19 Sep 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LP5891Q1EVM — LP5891-Q1 Treiber für 48×16-LED-Matrix mit gemeinsamer Kathode – Evaluierungsmodul

Das Evaluierungsmodul LP5891-Q1 (EVM) dient zur Evaluierung der Eigenschaften, der Funktion und der Anwendung des Matrix-LED-Display-Treibers LP5891-Q1. Bei dem LP5891-Q1 handelt es sich um einen hochintegrierten (48 Konstantstromquellen/16 Scan-FETs) Treiber für Matrix-LED-Displays mit gemeinsamer (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Anwendungssoftware und Frameworks

LP5891Q1EVM-SW-F280039C — Reference code for LP5891-Q1 EVM based on TMS320F280039C (LAUNCHXL-F280039C)

This reference code showcases the ability of the TMS320F280039C device to communicate with the LP5891-Q1 LED driver. The code configures the MCU using CLB to drive a 16x16 RGB LED matrix which is available on the LP5891Q1EVM.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
LP5891-Q1 — 48 x 16 Matrix-LED-Treiber mit 16-Bit Pulsweitenmodulation für die Automobilindustrie
RGB-LED-Treiber
LP5891 — 48 x 16-LED-Matrix-Treiber mit 16-Bit-PWM-Dimmung und extrem geringem Stromverbrauch
Hardware-Entwicklung
Evaluierungsplatine
LP5891Q1EVM — LP5891-Q1 Treiber für 48×16-LED-Matrix mit gemeinsamer Kathode – Evaluierungsmodul LP5891EVM — LP5891 Treiber für 48×16-LED-Matrix mit gemeinsamer Kathode – Evaluierungsmodul
Download-Optionen
Anwendungssoftware und Frameworks

LP5899DYYEVM-LP5891-F280039C-SW — LP5899 reference code pairing with LP5891(-Q1) based on TMS320F280039C (LAUNCHXL-F280039C)

This reference code showcases the ability of the TMS320F280039C device to communicate with the LP5899(-Q1) paired with LP5891(-Q1) LED driver. The code configures the MCU using SPI to drive the LEDs on the LP5891(Q1)EVM.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
LP5899-Q1 — Brücke zwischen SPI und LED-Matrix-Treiber für LP589x-Q1-Displays für die Automobilindustrie LP5891-Q1 — 48 x 16 Matrix-LED-Treiber mit 16-Bit Pulsweitenmodulation für die Automobilindustrie
RGB-LED-Treiber
LP5891 — 48 x 16-LED-Matrix-Treiber mit 16-Bit-PWM-Dimmung und extrem geringem Stromverbrauch
Hardware-Entwicklung
Evaluierungsplatine
LP5899DYYEVM — LP5899 evaluation module LP5891EVM — LP5891 Treiber für 48×16-LED-Matrix mit gemeinsamer Kathode – Evaluierungsmodul LP5891Q1EVM — LP5891-Q1 Treiber für 48×16-LED-Matrix mit gemeinsamer Kathode – Evaluierungsmodul
Download-Optionen
Berechnungstool

SLDR007 — LP5891 Registers Map Generator

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
LP5891-Q1 — 48 x 16 Matrix-LED-Treiber mit 16-Bit Pulsweitenmodulation für die Automobilindustrie
RGB-LED-Treiber
LP5891 — 48 x 16-LED-Matrix-Treiber mit 16-Bit-PWM-Dimmung und extrem geringem Stromverbrauch
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RRF) 76 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos