LM7310
- Wide operating input voltage range: 2.7 V to 23 V
- 28-V absolute maximum
- Withstands negative voltages up to -15 V
- Integrated back-to-back FETs with low On-Resistance: RON = 28.4 mΩ (typ)
- Ideal diode operation with true reverse current blocking
- Fast overvoltage protection
-
1.2-µs (typ) response time
- Adjustable overvoltage lockout (OVLO)
-
- Fast-trip response to transient overcurrents during steady state
- 500-ns (typ) response time
- Latch-off after fault
- Analog load current monitor output (IMON)
- Current range: 0.5 A to 5.5 A
- Accuracy: ±15% (max) (IOUT ≥ 1 A)
- Active high enable input with adjustable undervoltage lockout threshold (UVLO)
- Adjustable output slew rate control (dVdt)
- Overtemperature protection
- Power Good indication (PG) with adjustable threshold (PGTH)
- Small footprint: QFN 2 mm x 2 mm, 0.45-mm pitch
The LM73100 is a highly integrated circuit protection and power management solution in a small package. The device provides multiple protection modes using very few external components and is a robust defense against voltage surges, reverse polarity, reverse current and excessive inrush current.
With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the device well suited for power MUX/ORing applications. The device uses linear ORing based scheme to ensure almost zero DC reverse current and emulates ideal diode behavior with minimum forward voltage drop and power dissipation.
Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device also provides fast trip response to transient overcurrent events during steady state.
The device provides an accurate sense of the output load current on the analog current monitor pin.
The device is available in a 2-mm x 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.
The device is characterized for operation over a junction temperature range of –40°C to +125°C.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM73100, 2.7 - 23 V, 5.5 A Integrated Ideal Diode with Input Reverse Polarity and Overvoltage Protection datasheet (Rev. A) | PDF | HTML | 2020/12/15 |
| EVM User's guide | LM73100 Integrated Ideal Diode Evaluation Module (Rev. A) | PDF | HTML | 2020/12/14 | |
| Application note | Basics of Power MUX (Rev. A) | PDF | HTML | 2020/10/20 | |
| Application brief | Fast Role Swap, Linear ORing with TPS25947 and LM73100 in USB-Type C Systems (Rev. A) | PDF | HTML | 2020/10/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM73100EVM — LM73100 통합 이상적 다이오드 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RPW) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.