전원 관리 전원 스위치 고압측 스위치 컨트롤러

TPS4812-Q1

활성

양방향 전류 모니터링, I2t 및 진단 기능을 갖춘 차량용 100V 저 IQ 고압측 드라이버

제품 상세 정보

Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -65 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Current sense accuracy +/-2% at 30-mV VSNS Short-circuit protection response time (µs) 6 Features Automatic load wake-up, Bi-directional, Fault Diagnostics, High-side RSNS, Over Temperature Protection, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing Operating temperature range (°C) -40 to 125 Rating Automotive
Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -65 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Current sense accuracy +/-2% at 30-mV VSNS Short-circuit protection response time (µs) 6 Features Automatic load wake-up, Bi-directional, Fault Diagnostics, High-side RSNS, Over Temperature Protection, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing Operating temperature range (°C) -40 to 125 Rating Automotive
VQFN (RGE) 23 16 mm² 4 x 4

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input and output protection down to –65V
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A src/2A sink G: 100µA src/0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog bi-directional current monitor output (IMON, I_DIR): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO, overtemperature
  • TPS48120-Q1 (I2t enabled), TPS48121-Q1 (I2t disabled)
  • Accurate (±2%) and adjustable undervoltage lockout (UVLO)

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input and output protection down to –65V
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A src/2A sink G: 100µA src/0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog bi-directional current monitor output (IMON, I_DIR): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO, overtemperature
  • TPS48120-Q1 (I2t enabled), TPS48121-Q1 (I2t disabled)
  • Accurate (±2%) and adjustable undervoltage lockout (UVLO)

TPS4812-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 95V, 100V absmax the device is suitable for 12V, 24V and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto Load wakeup threshold adjusted using RBYPASS resistor placed across DRN and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate bi-directional current sensing (±2%) output (IMON, I_DIR) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS4812-Q1 is available in 23-pin VQFN package.

TPS4812-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 95V, 100V absmax the device is suitable for 12V, 24V and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto Load wakeup threshold adjusted using RBYPASS resistor placed across DRN and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate bi-directional current sensing (±2%) output (IMON, I_DIR) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS4812-Q1 is available in 23-pin VQFN package.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TPS4812-Q1 100V Low IQ Automotive High-Side Switch Controller With Bi-directional IMON, Low Power Mode, Load Wakeup, I2 t, and Diagnostics datasheet PDF | HTML 2024/12/27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS1214Q1EVM — TPS1214-Q1 evaluation module

The TPS1214-Q1 evaluation module (EVM) allows reference circuit evaluation of the TPS1214-Q1 smart high-side driver. The EVM allows for full configuration of the high-side driver as well as various parameters such as overcurrent protection, short-circuit protection and configurable I2T control. (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGE) 23 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상