All trademarks are the property of their respective owners.
The LMH0387 3 Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer / Cable Driver provides a single chip interface to a BNC. The device can be configured either in the input mode as an equalizer to receive data over coaxial cable or in the output mode as a cable driver to transmit data over coaxial cable. The same I/O pin is used both for the input and the output functions of the device, allowing the system designer the flexibility to use a BNC attached to the device as either an input or an output.
The device operates over a wide range of data rates from 125 Mbps to 2.97 Gbps (DC to 2.97 Gbps when driving cable) and supports ST 424, ST 292, ST 344, and ST 259. The return loss network is integrated within the device so no external components are required to meet the SMPTE return loss specification. The LMH0387 offers designers flexibility in system design and quicker time to market.
In the input mode, the LMH0387 features include a power-saving sleep mode, programmable output common mode voltage and swing, cable length indication, launch amplitude optimization, input signal detection, and an SPI interface. In the output mode, the LMH0387 features include two selectable slew rates for ST 424 / 292 and ST 259 compliance, and output driver power-down control.
The device is available in a 7-mm × 7-mm 48-pin laminate Thin Laminate Grid Array (TLGA) Package.
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | LMH0387 3 Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer / Cable Driver datasheet (Rev. H) | PDF | HTML | 2015年 8月 31日 |
| Application note | Simplifying 4K SDI Video Design with a Bidrectional I/O | 2017年 10月 31日 | ||
| Selection guide | Broadcast and Professional Video Interface Solutions (Rev. E) | 2017年 4月 5日 | ||
| Application note | AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) | 2013年 4月 26日 | ||
| Application note | AN-2145 Power Considerations for SDI Products (Rev. B) | 2013年 4月 26日 | ||
| Application note | AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) | 2013年 4月 26日 | ||
| Application note | AN-2156 Configuring the LMH0387 for an Equalizer-Only Application (Rev. A) | 2013年 4月 26日 | ||
| User guide | 3 Gbps HD SD SDI Configurable IO Adaptive Equalizer Driver Eval Bd User Guide | 2012年 1月 26日 | ||
| Application note | High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems | 2009年 11月 12日 | ||
| Design guide | Broadcast Video Owner's Manual | 2006年 11月 17日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TLGA (NPD) | 48 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
ALP GUI Platform