Computer on module
Products and reference designs
Computer on module
Overview
Our integrated circuits and reference designs enable you to build a computer on a module in a small form-factor, enabling fanless solutions with scalable processing performance.
Design requirements
Computer on modules often require:
- Integrated and flexible power delivery.
- Scalable platforms for processing needs.
- Multi-protocol industrial communication and interface solutions.
Block diagram
Find products and reference designs for your system.
X86 based computer on module
Housekeeping
Power management (6)
Supervisor & reset ICs
-
TLV803E—Low-power voltage supervisor (reset IC) with active-low open-drain output
-
TPS3899—Nanopower supervisor with programmable sense and reset delay
-
TPS3840—Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay
-
TLV809E—Low-power voltage supervisor (reset IC) with active-low push-pull output
-
TPS3808E—600nA ultra-low quiescent current supervisor with programmable delay and manual reset
-
TPS3710—Wide-VIN voltage detector
Isolation (1)
Isolated amplifiers
-
AMC0311S—Precision 2V-input reinforced isolated amplifier with fixed gain, single-ended output
Interface (23)
RS-232 transceivers
-
TRS213E—5V multichannel 120kbps RS-232 line driver/receiver with ±9V output and ±15kV IEC ESD protection
-
MAX3243E—3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
-
TRS213—5V multichannel 120kbps RS-232 line driver/receiver with ±9V output and ±15kV ESD protection
-
MAX3243—3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection
-
TRSF3222E—3- to 5.5-V dual channel 1Mbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
-
MAX211—5-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection
CAN transceivers
-
TCAN1057A-Q1—Automotive enhanced CAN transceiver with silent mode
-
TCAN3414—3.3-V CAN FD transceiver with shut-down and standby mode
-
TCAN1044A-Q1—Enhanced automotive CAN transceiver with standby
I2C & I3C level shifters, buffers & hubs
-
TCA39306—FM+ I²C bus and SMBus voltage translator
-
TCA9406—2-bit bidirectional 1MHz I2C/SMBus voltage level translator with internal pull-up resistor
-
PCA9306—2-bit bidirectional 400-kHz I2C/SMBus voltage level translator
-
TCA9617B—2-bit level-translating 1-MHz I2C/SMBus buffer/repeater with powered-off high-impedance
-
TCA9517A—2-bit level-translating 400-kHz I2C/SMBus buffer/repeater with powered-off high-impedance
-
TCA9517-Q1—Automotive 2-bit level-translating 400-kHz I2C/SMBus buffer/repeater with powered-off high-impedance
I2C general-purpose I/Os (GPIOs)
-
TCA9538—8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
-
TCA9539—16-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
-
TCA9554A—8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, weak pull-up & config registers
-
TCA9555—16-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, weak pull-up & config registers
-
PCA9536—4-bit 2.3- to 5.5-V I2C/SMBus I/O expander with config registers
I2C & I3C switches & multiplexers
-
TCA9548A—8-channel 1.65- to 5.5-V I2C/SMBus switch with reset & voltage translation
-
TCA9548A-Q1—Automotive 8-channel 1.65- to 5.25v I2C/SMBus switch with reset & voltage translation
-
TCA9546A—4-channel 1.65- to 5.5-V I2C/SMBus switch with reset & voltage translation
Sensors (6)
Digital temperature sensors
-
TMP110—±1.0°C accurate I²C temperature sensor with alert in compact X2SON package
-
TMP75—1C digital temperature sensor, I2C/SMBus in industry standard LM75 form factor
-
TMP1075—1°C I²C temperature sensor with performance upgrades to industry standard LM75 / TMP75
-
TMP139—JEDEC DDR5 temperature sensor with 0.5 °C accuracy
-
TMP102—2C digital temperature sensor, I2C/SMBus in 2.56mm2 package
-
TMP421—Remote and Local Temperature Sensor with N-Factor and Series-R Correction in WCSP
Amplifiers (18)
Comparators
General-purpose op amps
-
OPA310—Single, 5.5-V, 3-MHz high-output-current (150 mA) fast-shutdown (1 μs) operational amplifier
-
TLV8801—Single, 5.5-V, 6-kHz, ultra low quiescent current (450-nA), RRIO operational amplifier
-
TLV9001—One-channel, 1-MHz rail-to-rail input and output 1.8-V to 5.5-V operational amplifier
-
LM358B—Dual, 36-V, 1.2-MHz, 3-mV offset voltage operational amplifier with -40°C to 85°C operation
-
TLV9301—Single, 40-V, 1-MHz, low-power operational amplifier
-
LM2904B—Dual, 36-V, 1.2-MHz operational amplifier with -40°C to 125°C operation
Analog current-sense amplifiers
Digital power monitors
Technical documentation
No results found. Please clear your search and try again.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.
