CC2650MODA
Multiprotokollfähiger drahtloses SimpleLink™-Modul ARM Cortex-M3, 32 Bit, 2,4 GHz, 128 kB Flash-Spei
CC2650MODA
- Microcontroller
- Powerful ARM® Cortex®-M3
- EEMBC CoreMark® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultra-Low-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air (OTA) Upgrade
- Ultra-Low-Power Sensor Controller
- Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultra-Low-Leakage SRAM for
Code and Data
- Efficient Code Size Architecture, Placing Drivers, Bluetooth® low energy Controller, IEEE® 802.15.4 Medium Access Control (MAC), and Bootloader in ROM
- Integrated Antenna
- Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
(8 × 16-Bit or 4 × 32-Bit Timer, PWM Each) - 12-Bit ADC, 200-ksamples/s, 8-Channel
Analog MUX - Continuous Time Comparator
- Ultra-Low-Power Analog Comparator
- Programmable Current Source
- UART
- 2 × SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 15 GPIOs
- Support for Eight Capacitive Sensing Buttons
- Integrated Temperature Sensor
- External System
- On-Chip Internal DC-DC Converter
- No External Components Needed, Only Supply Voltage
- Low Power
- Wide Supply Voltage Range
- Operation from 1.8 to 3.8 V
- Active-Mode RX: 6.2 mA
- Active-Mode TX at 0 dBm: 6.8 mA
- Active-Mode TX at +5 dBm: 9.4 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller:
0.4 mA + 8.2 µA/MHz - Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
- Wide Supply Voltage Range
- RF Section
- 2.4-GHz RF Transceiver Compatible With Bluetooth low energy (BLE) 5.1 Specification and IEEE 802.15.4 PHY and MAC
- CC2650MODA RF-PHY Qualified (QDID: 88415)
- Excellent Receiver Sensitivity (–97 dBm for Bluetooth low energy and –100 dBm for 802.15.4), Selectivity, and Blocking Performance
- Programmable Output Power up to +5 dBm
- Pre-certified for Compliance With Worldwide Radio Frequency Regulations
- ETSI RED (Europe)
- IC (Canada)
- FCC (USA)
- ARIB STD-T66 (Japan)
- JATE (Japan)
- Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench® for ARM
- Code Composer Studio™
The SimpleLink™ CC2650MODA device is a wireless microcontroller (MCU) module that targets Bluetooth® low energy applications. The CC2650MODA device can also run ZigBee® and 6LoWPAN and ZigBee RF4CE™ remote control applications.
The module is based on the SimpleLink CC2650 wireless MCU, a member of the CC26xx family of cost-effective, ultra-low-power, 2.4-GHz RF devices. Very-low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin-cell batteries and in energy-harvesting applications.
The CC2650MODA module contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultra-low-power sensor controller. This sensor controller is good for interfacing with external sensors or for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2650MODA device is good for applications within a wide range of products including industrial, consumer electronics, and medical devices.
The CC2650MODA module is pre-certified for operation under the regulations of the FCC, IC, ETSI, and ARIB. These certifications save significant cost and effort for customers when integrating the module into their products.
The Bluetooth low energy controller and the IEEE 802.15.4 MAC are embedded in the ROM and are partly running on a separate ARM® Cortex®-M0 processor. This architecture improves overall system performance and power consumption and makes more flash memory available.
The Bluetooth low energy software stack (BLE-Stack) and the ZigBee software stack (Z-Stack™) are available free of charge.
Ähnliche Produkte, die für Sie interessant sein könnten
Ähnliche Funktionalität wie verglichener Baustein
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
BOOSTXL-CC2650MA — TI SimpleLink™ Bluetooth® CC2650-Modul-BoosterPack™-Plug-in Modul mit geringem Strom
The SimpleLink™ Bluetooth® low energy CC2650 Module BoosterPack plug-in module is the quick and easy way to add Bluetooth low energy to your LaunchPad™ development kit. Simply plug the CC2650 module BoosterPack kit into the MSP432™ microcontroller (MCU) LaunchPad kit to get started! The software (...)
TMDSEMU110-U — XDS110 JTAG-Debug-Tastkopf
Der XDS110 von Texas Instruments ist eine neue Klasse von Debug-Tastkopf (Emulator) für Embedded-Prozessoren von TI. Der XDS110 ersetzt die XDS100-Familie und unterstützt eine größere Anzahl von Standards (IEEE1149.1, IEEE1149.7, SWD) in einem einzigen Pod. Alle XDS-Debug-Tastköpfe unterstützen (...)
TMDSEMU200-U — XDS200-USB-Debug-Tastkopf
Die XDS200 ist eine Debug-Sonde (Emulator) zum Debuggen von Embedded-Bausteinen von TI. Die XDS200 bietet ein ausgewogenes Preis-Leistungsverhältnis im Vergleich zum preiswerten XDS110 und dem leistungsstarken XDS560v2 und unterstützt zahlreiche Standards (IEEE1149,1, IEEE1149,7, SWD) in einem (...)
BLE-STACK — Bluetooth-Softwarestack mit geringem Stromverbrauch
REMOTI — RF4CE-konformer Protokollstack
TIMAC — IEEE802.15.4 Medium Access Control (MAC)-Softwarestack
To download the free tools download click the "Get Software" button above. By subscribing, we will be able to notify you of updates when they become available and provide instructions on how to perform the update.
Z-STACK-ARCHIVE — Archiv für Z-Stack vollständig konforme ZigBee 2012-Lösung
Diese Seite enthält Links zu früheren Versionen der Z-Stack-Versionen. Für neue Projekte empfiehlt TI, die neueste Version zu verwenden, um alle Verbesserungen und neuen Funktionen zu nutzen. Die neueste Z-Stack-Version finden Sie unter www.ti.com/z-stack.
Z-Stack Home
Z-Stack Home ist der (...)
SENSOR-CONTROLLER-STUDIO — Sensor controller studio
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Weitere Drahtlosprodukte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Entwicklungskit
Evaluierungsplatine
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
Unterstützte Produkte und Hardware
Produkte
mmWave-Radarsensoren für die Automobilindustrie
Digitale Signalprozessoren (DSPs)
C2000-Echtzeit-Mikrocontroller
WLAN-Produkte
ARM-basierte Prozessoren
mmWave-Radarsensoren für Industrieanwendungen
Arm Cortex-M4-MCUs
Arm Cortex-R-MCUs
Drahtlos-MCUs für Sub-1 GHz
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Energieeffiziente 2,4-GHz-Produkte
SIMPLELINK-SDK-BLUETOOTH-PLUGIN — Bluetooth Plug-in for SimpleLink™ MCU SDK
The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)
Unterstützte Produkte und Hardware
Produkte
WLAN-Produkte
Arm Cortex-M4-MCUs
Energieeffiziente 2,4-GHz-Produkte
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
FLASH-PROGRAMMER-2 — SmartRF Flash Programmer v2
SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces. Check the list of supported products for compatibility. Uniflash can also be used to program any SimpleLink product.
SmartRF Flash (...)
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Weitere Drahtlosprodukte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
Unterstützte Produkte und Hardware
Produkte
C2000-Echtzeit-Mikrocontroller
ARM-basierte Prozessoren
mmWave-Radarsensoren für Industrieanwendungen
mmWave-Radarsensoren für die Automobilindustrie
MSP430-Mikrocontroller
WLAN-Produkte
Arm Cortex-M4-MCUs
Arm Cortex-M0+-MCUs
Arm Cortex-R-MCUs
Energieeffiziente 2,4-GHz-Produkte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Drahtlos-MCUs für Sub-1 GHz
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Sub-1-GHz-Transceiver
Weitere Drahtlosprodukte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Software
Software-Programmiertool
Berechnungstool
Treiber oder Bibliothek
RF-RANGE-ESTIMATOR — RF Range Estimator
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Sub-1-GHz-Transceiver
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
Software
Berechnungstool
SWRC258 — BLE Device Monitor (v2.9.0)
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Entwicklungskit
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx and CC23xx devices
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Software
Berechnungstool
Software-Entwicklungskit (SDK)
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Sub-1-GHz-Transceiver
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Unterstützte Produkte und Hardware
Produkte
MSP430-Mikrocontroller
Energieeffiziente 2,4-GHz-Produkte
Drahtlos-MCUs für Sub-1 GHz
Sub-1-GHz-Transceiver
Weitere Drahtlosprodukte
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Hardware-Entwicklung
Entwicklungskit
Evaluierungsplatine
Schnittstellenadapter
Tochterkarte
CC26XX-CERTIFICATION — Funkzertifizierung für SimpleLink™ CC26xx
CC26XX-REPORTS — CC26xx regulatory certifcation reports
Unterstützte Produkte und Hardware
Produkte
Energieeffiziente 2,4-GHz-Produkte
Hardware-Entwicklung
Evaluierungsplatine
3P-WIRELESS-MODULES — Suchtool für drahtlose Module von Drittanbietern
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — Hardware-Designprüfungen für SimpleLink™ CC2xxx-Bausteine
TIDC-SPPBLE-SW-RD — UART zu Bluetooth® (BLE)-Brücke mit geringem Stromverbrauch – Referenzdesign
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
QFM (MOH) | 29 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.