Inicio Interfaz Otras interfaces

LM2512A

ACTIVO

Serializador de interfaz de pantalla RGB de 24 bits Mobile Pixel Link (MPL-1) con señales aleatorias

Detalles del producto

Protocols Catalog Rating Catalog Operating temperature range (°C) -30 to 85
Protocols Catalog Rating Catalog Operating temperature range (°C) -30 to 85
NFBGA (NZK) 49 16 mm² 4 x 4 X2QFN (NJM) 40 36 mm² 6 x 6
  • 24-bit RGB Interface Support up to 640 x 480 VGA Format
  • Optional 24 to 18-bit Dithering
  • Optional Look Up Table for Independent Color Correction
  • MPL-1 Physical Layer
  • SPI Interface for Look Up Table Control and Loading
  • Low Power Consumption & Powerdown State
  • Level Translation Between Host and Display
  • Optional Auto Power Down on STOP PCLK
  • Frame Sequence Bits Auto Resync upon Data or Clock Error
  • 1.6V to 2.0V Core / Analog Supply Voltage
  • 1.6V to 3.0V I/O Supply Voltage Range

System Benefits

  • Dithered Data Reduction
  • Independent RGB Color Correction
  • 24-bit Color Input
  • Small Interface, Low Power and Low EMI
  • Intrinsic Level Translation

All trademarks are the property of their respective owners.

  • 24-bit RGB Interface Support up to 640 x 480 VGA Format
  • Optional 24 to 18-bit Dithering
  • Optional Look Up Table for Independent Color Correction
  • MPL-1 Physical Layer
  • SPI Interface for Look Up Table Control and Loading
  • Low Power Consumption & Powerdown State
  • Level Translation Between Host and Display
  • Optional Auto Power Down on STOP PCLK
  • Frame Sequence Bits Auto Resync upon Data or Clock Error
  • 1.6V to 2.0V Core / Analog Supply Voltage
  • 1.6V to 3.0V I/O Supply Voltage Range

System Benefits

  • Dithered Data Reduction
  • Independent RGB Color Correction
  • 24-bit Color Input
  • Small Interface, Low Power and Low EMI
  • Intrinsic Level Translation

All trademarks are the property of their respective owners.

The LM2512A is a MPL Serializer (SER) that performs a 24-bit to 18-bit Dither operation and serialization of the video signals to Mobile Pixel link (MPL) levels on only 3 or 4 active signals. An optional Look Up Table (Three X 256 X 8 bit RAM) is also provided for independent color correction. 18-bit Bufferless or partial buffer displays from QVGA (320 x 240) up to VGA (640 x 480) pixels can utilize a 24-bit video source.

The interconnect is reduced from 28 signals to only 3 or 4 active signals with the LM2512A and companion deserializer easing flex interconnect design, size constraints and cost.

The LM2512A SER resides by the application, graphics or baseband processor and translates the wide parallel video bus from LVCMOS levels to serial Mobile Pixel Link levels for transmission over a flex cable (or coax) and PCB traces to the DES located near or in the display module.

When in Power_Down, the SER is put to sleep and draws less than 10μA. The link can also be powered down by stopping the PCLK (DES dependant) or by the PD* input pins.

The LM2512A provides enhanced AC performance over the LM2512. It implements the physical layer of the MPL-1 and uses a single-ended current-mode transmission.

The LM2512A is a MPL Serializer (SER) that performs a 24-bit to 18-bit Dither operation and serialization of the video signals to Mobile Pixel link (MPL) levels on only 3 or 4 active signals. An optional Look Up Table (Three X 256 X 8 bit RAM) is also provided for independent color correction. 18-bit Bufferless or partial buffer displays from QVGA (320 x 240) up to VGA (640 x 480) pixels can utilize a 24-bit video source.

The interconnect is reduced from 28 signals to only 3 or 4 active signals with the LM2512A and companion deserializer easing flex interconnect design, size constraints and cost.

The LM2512A SER resides by the application, graphics or baseband processor and translates the wide parallel video bus from LVCMOS levels to serial Mobile Pixel Link levels for transmission over a flex cable (or coax) and PCB traces to the DES located near or in the display module.

When in Power_Down, the SER is put to sleep and draws less than 10μA. The link can also be powered down by stopping the PCLK (DES dependant) or by the PD* input pins.

The LM2512A provides enhanced AC performance over the LM2512. It implements the physical layer of the MPL-1 and uses a single-ended current-mode transmission.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet MPL-1 24-Bit RGB Display I/F Serializer w/ Optional Dithering & Look Up Table datasheet (Rev. B) 02 may 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
NFBGA (NZK) 49 Ultra Librarian
X2QFN (NJM) 40 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos